Career and Education Opportunities for Sheet Metal Workers in St. Paul, Minnesota
For those living in the St. Paul, Minnesota area, there are many career and education opportunities for sheet metal workers. About 3,930 people are currently employed as sheet metal workers in Minnesota. By 2016, this is expected to grow by 4% to about 4,090 people employed. This is not quite as good as the national trend for sheet metal workers, which sees this job pool growing by about 6.5% over the next eight years. In general, sheet metal workers fabricate, assemble, and repair sheet metal products and equipment, such as ducts, control boxes, and furnace casings.
Sheet metal workers earn approximately $27 per hour or $56,810 annually on average in Minnesota. Nationally they average about $19 per hour or $40,290 per year. Incomes for sheet metal workers are better than in the overall category of Metal Working and Welding in Minnesota, and not quite as good as the overall Metal Working and Welding category nationally.
There are two schools within twenty-five miles of St. Paul where you can study to be a sheet metal worker, among seventy-seven schools of higher education total in the St. Paul area. Given that the most common education level for sheet metal workers is a high school diploma or GED, it will take only a short time to learn to be a sheet metal worker if you already have a high school diploma.
CAREER DESCRIPTION: Sheet Metal Worker
In general, sheet metal workers fabricate, assemble, and repair sheet metal products and equipment, such as ducts, control boxes, and furnace casings. They also work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; inspecting, assembling, and smoothing seams and joints of burred surfaces.
Sheet metal workers drill and punch holes in metal for screws, bolts, and rivets. They also lay out and mark dimensions and reference lines on material, such as roofing panels, in line with drawings or templates, using calculators, scribes, dividers, squares, and rulers. Equally important, sheet metal workers have to fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items. They are often called upon to decide on project requirements and required methods and materials, in line with blueprints and written or verbal instructions. They are expected to set up assemblies, such as flashing, pipes, tubes, heating and air conditioning ducts and down spouts, in supportive frameworks. Finally, sheet metal workers fabricate or alter parts at construction sites, using shears, hammers, punches, and drills.
Every day, sheet metal workers are expected to be able to visualize how things come together and can be organized. They need to see details at a very fine level of focus. It is also important that they prioritize information for further consideration.
It is important for sheet metal workers to maneuver completed units into position for installation, and anchor the units. They are often called upon to shape metal material over anvils or other forms, using hand tools. They also finish parts, using hacksaws, and hand, rotary, or squaring shears. They are sometimes expected to transport prefabricated parts to construction sites for assembly and installation. Somewhat less frequently, sheet metal workers are also expected to lay out and mark dimensions and reference lines on material, such as roofing panels, in line with drawings or templates, using calculators, scribes, dividers, squares, and rulers.
Sheet metal workers sometimes are asked to convert blueprints into shop drawings to be followed in the construction and assembly of sheet metal products. They also have to be able to fasten roof panel edges and machine-made molding to structures, nailing or welding pieces into position And finally, they sometimes have to fabricate or alter parts at construction sites, using shears, hammers, punches, and drills.
Like many other jobs, sheet metal workers must be reliable and be thorough and dependable.
EDUCATIONAL OPPORTUNITIES: Sheet Metal Worker Training
Saint Paul College - A Community and Technical College - Saint Paul, MN
Saint Paul College - A Community and Technical College, 235 Marshall Ave, Saint Paul, MN 55102-9808. Saint Paul College - A Community and Technical College is a medium sized college located in Saint Paul, Minnesota. It is a public school with primarily 2-year programs and has 5,388 students. Saint Paul College - A Community and Technical College has a one to two year program in Sheet Metal Technology/Sheetworking which graduated thirty-five students in 2008.
Dunwoody College of Technology - Minneapolis, MN
Dunwoody College of Technology, 818 Dunwoody Blvd, Minneapolis, MN 55403-1192. Dunwoody College of Technology is a small college located in Minneapolis, Minnesota. It is a private not-for-profit school with primarily 4-year or above programs. It has 1,611 students and an admission rate of 68%. Dunwoody College of Technology has a one to two year program in Sheet Metal Technology/Sheetworking.
LOCATION INFORMATION: St. Paul, Minnesota
St. Paul is located in Ramsey County, Minnesota. It has a population of over 279,590, which has shrunk by 2.6% in the past ten years. The cost of living index in St. Paul, 99, is near the national average. New single-family homes in St. Paul are valued at $213,300 on average, which is well below the state average. In 2008, thirty new homes were built in St. Paul, down from seventy-four the previous year.
The three most popular industries for women in St. Paul are educational services, health care, and finance and insurance. For men, it is educational services, professional, scientific, and technical services, and construction. The average commute to work is about 21 minutes. More than 32.0% of St. Paul residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 12.0%, is higher than the state average.
The unemployment rate in St. Paul is 7.4%, which is greater than Minnesota's average of 7.0%.
The percentage of St. Paul residents that are affiliated with a religious congregation, 61.3%, is more than both the national and state average. Zion Church, Convent of the Visitation and Saint Paul Cathedral are some of the churches located in St. Paul. The most prominent religious groups are the Catholic Church, the Evangelical Lutheran Church in America and the Baptist General Conference.
St. Paul is home to the Saint Paul Orphange and the Wilder Center as well as Terrace Park and East View Playground.