Career and Education Opportunities for Welders in Minneapolis, Minnesota
Minneapolis, Minnesota provides a wide variety of opportunities, both career and educational, for welders. The national trend for welders sees this job pool shrinking by about 1.6% over the next eight years. Welders generally use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders earn about $17 per hour or $36,520 per year on average in Minnesota and about $16 per hour or $33,560 per year on average nationally. Incomes for welders are better than in the overall category of Foundry and Metal Work in Minnesota, and better than the overall Foundry and Metal Work category nationally.
There are eighty schools of higher education in the Minneapolis area, including six within twenty-five miles of Minneapolis where you can get a degree to start your career as a welder. Welders usually hold less than a high school diploma, so you can expect to spend only a short time studying to be a welder if you already have a high school diploma.
CAREER DESCRIPTION: Welder
In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders bolt components to set required configurations and positions for welding. They also remove rough spots from workpieces, using portable grinders or scrapers. Equally important, welders have to chip or grind off excess weld or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. They are often called upon to weld components in flat or overhead positions. They are expected to operate safety equipment and use safe work habits. Finally, welders recognize and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Every day, welders are expected to be able to control objects and devices with precise control. They need to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for welders to ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. They are often called upon to examine workpieces for defects and measure workpieces with straightedges or templates to insure conformance with specifications. They also ready all material surfaces to be welded, ensuring that there is no loose or thick scale, slag or other foreign matter. They are sometimes expected to monitor the fitting and welding processes to avoid overheating of components or warping or expansion of material. Somewhat less frequently, welders are also expected to operate manual or semi-automatic welding apparatus to fuse metal segments.
Welders sometimes are asked to operate metal shaping and bending machines, such as brakes and shears. And finally, they sometimes have to decide on and install torches, torch tips and flux, in line with welding chart specifications or types and thicknesses of metals.
Like many other jobs, welders must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Minneapolis include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Cabinet Maker. Cut, shape, and assemble wooden articles or set up and operate a variety of woodworking machines, such as power saws, jointers, and mortisers to surface, cut, or shape lumber or to fabricate parts for wood products.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Machinist. Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, shop mathematics, and machining procedures.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Structural and Ornamental Metalwork Metal Fabricator. Fabricate, lay out, and fit parts of structural metal products.
- Tool and Die Maker. Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Welder Training
Saint Paul College - A Community and Technical College - Saint Paul, MN
Saint Paul College - A Community and Technical College, 235 Marshall Ave, Saint Paul, MN 55102-9808. Saint Paul College - A Community and Technical College is a medium sized college located in Saint Paul, Minnesota. It is a public school with primarily 2-year programs and has 5,388 students. Saint Paul College - A Community and Technical College has a less than one year and a one to two year program in Welding Technology/Welder which graduated nineteen and seven students respectively in 2008.
Dakota County Technical College - Rosemount, MN
Dakota County Technical College, 1300 145th Street East, Rosemount, MN 55068-2999. Dakota County Technical College is a small college located in Rosemount, Minnesota. It is a public school with primarily 2-year programs and has 2,919 students. Dakota County Technical College has a one to two year program in Welding Technology/Welder which graduated eleven students in 2008.
Hennepin Technical College - Brooklyn Park, MN
Hennepin Technical College, 9000 Brooklyn Blvd, Brooklyn Park, MN 55445. Hennepin Technical College is a medium sized college located in Brooklyn Park, Minnesota. It is a public school with primarily 2-year programs and has 5,617 students. Hennepin Technical College has a less than one year and a one to two year program in Welding Technology/Welder which graduated twelve and nine students respectively in 2008.
Minneapolis Community and Technical College - Minneapolis, MN
Minneapolis Community and Technical College, 1501 Hennepin Ave, Minneapolis, MN 55403-1779. Minneapolis Community and Technical College is a medium sized college located in Minneapolis, Minnesota. It is a public school with primarily 2-year programs and has 9,539 students. Minneapolis Community and Technical College has a less than one year program in Welding Technology/Welder which graduated two students in 2008.
Anoka Technical College - Anoka, MN
Anoka Technical College, 1355 W Hwy 10, Anoka, MN 55303. Anoka Technical College is a small college located in Anoka, Minnesota. It is a public school with primarily 2-year programs and has 2,072 students. Anoka Technical College has a less than one year program in Welding Technology/Welder which graduated nine students in 2008.
Dunwoody College of Technology - Minneapolis, MN
Dunwoody College of Technology, 818 Dunwoody Blvd, Minneapolis, MN 55403-1192. Dunwoody College of Technology is a small college located in Minneapolis, Minnesota. It is a private not-for-profit school with primarily 4-year or above programs. It has 1,611 students and an admission rate of 68%. Dunwoody College of Technology has a one to two year program in Welding Technology/Welder which graduated twenty-one students in 2008.
Radiographic Interpreter: The program, based upon requirements contained within AWS B5.
For more information, see the American Welding Society website.
Certified Robotic Arc Welding: The Certification Program for Robotic Arc Welding - Operators and Technicians (CRAW) allows many welding personnel employed in various welding sectors to measure themselves against standards for their occupation.
For more information, see the American Welding Society website.
LOCATION INFORMATION: Minneapolis, Minnesota
Minneapolis is situated in Hennepin County, Minnesota. It has a population of over 382,605. The cost of living index in Minneapolis, 101, is near the national average. New single-family homes in Minneapolis are priced at $451,300 on average, which is far greater than the state average. In 2008, forty-five new homes were constructed in Minneapolis, down from one hundred fifteen the previous year.
The top three industries for women in Minneapolis are health care, educational services, and accommodation and food services. For men, it is educational services, professional, scientific, and technical services, and accommodation and food services. The average commute to work is about 22 minutes. More than 37.4% of Minneapolis residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 13.1%, is higher than the state average.
The unemployment rate in Minneapolis is 7.0%, which is the same as Minnesota's average of 7.0%.
The percentage of Minneapolis residents that are affiliated with a religious congregation, 57.7%, is more than the national average but less than the state average. The largest religious groups are the Catholic Church, the Evangelical Lutheran Church in America and the United Methodist Church.
Minneapolis is home to the Saint Josephs Orphanage and the Hiawatha Municipal Golf Course as well as Beards Plaisance and Mississippi Park. Visitors to Minneapolis can choose from COE Mansion Carriage House, Radisson Hotel Metrodome and Best Western Kelly Inn for temporary stays in the area.