Career and Education Opportunities for Tool and Die Makers in Minneapolis, Minnesota
There is a wide variety of career and education opportunities for tool and die makers in the Minneapolis, Minnesota area. There are currently 2,380 working tool and die makers in Minnesota; this should shrink 5% to about 2,250 working tool and die makers in the state by 2016. This is better than the nation as a whole, where employment opportunities for tool and die makers are expected to shrink by about 8.0%. In general, tool and die makers analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
Income for tool and die makers is about $22 per hour or $47,360 annually on average in Minnesota. Nationally, their income is about $22 hourly or $46,430 per year. Tool and die makers earn more than people working in the category of Foundry and Metal Work generally in Minnesota and more than people in the Foundry and Metal Work category nationally.
There are three schools within twenty-five miles of Minneapolis where you can study to be a tool and die maker, among eighty schools of higher education total in the Minneapolis area. The most common level of education for tool and die makers is a post-secondary certificate. You can expect to spend a short time training to become a tool and die maker if you already have a high school diploma.
CAREER DESCRIPTION: Tool and Die Maker
In general, tool and die makers analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
Tool and die makers lift and secure machined components on surface plates or worktables, using hoists, vises, v-blocks, or angle plates. They also fit and assemble components to make or modify dies, jigs and tools, using machine tools and hand tools. Equally important, tool and die makers have to file and adjust different components to properly fit them together. They are often called upon to study blueprints or specifications to develop sequences of operations for fabricating tools or assemblies. They are expected to verify dimensions and clearances of finished components for conformance to given requirements, using measuring instruments such as calipers and dial indicators. Finally, tool and die makers decide on metals to be used from a range of metals and alloys, on the basis of properties such as hardness and heat tolerance.
Every day, tool and die makers are expected to be able to organize information in a variety of ways. They need to maintain precise control of objects and devices through a range of movements. It is also important that they listen to and understand others in meetings.
It is important for tool and die makers to inspect finished dies for smoothness and defects. They are often called upon to prepare and operate conventional or computer numerically controlled machine tools such as lathes and grinders to cut or otherwise shape components to prescribed dimensions and finishes. They also conduct test runs with completed tools or dies to insure that components meet specifications, making adjustments as needed. They are sometimes expected to set pyrometer controls of heat-treating furnaces and feed or place components, tools, or assemblies into furnaces to harden. Somewhat less frequently, tool and die makers are also expected to verify dimensions and clearances of finished components for conformance to given requirements, using measuring instruments such as calipers and dial indicators.
and decide on metals to be used from a range of metals and alloys, on the basis of properties such as hardness and heat tolerance. And finally, they sometimes have to measure and scribe metal or plastic stock to lay out machining, using instruments such as protractors and rulers.
Like many other jobs, tool and die makers must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Minneapolis include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Printing Press Machine Operator. Set up or operate various types of printing machines, such as offset, letterset, or gravure presses or screen printers to produce print on paper or other materials.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Structural and Ornamental Metalwork Metal Fabricator. Fabricate, lay out, and fit parts of structural metal products.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Tool and Die Maker Training
Saint Paul College - A Community and Technical College - Saint Paul, MN
Saint Paul College - A Community and Technical College, 235 Marshall Ave, Saint Paul, MN 55102-9808. Saint Paul College - A Community and Technical College is a medium sized college located in Saint Paul, Minnesota. It is a public school with primarily 2-year programs and has 5,388 students. Saint Paul College - A Community and Technical College has a one to two year program in Tool and Die Technology/Technician which graduated thirty-eight students in 2008.
Anoka Technical College - Anoka, MN
Anoka Technical College, 1355 W Hwy 10, Anoka, MN 55303. Anoka Technical College is a small college located in Anoka, Minnesota. It is a public school with primarily 2-year programs and has 2,072 students. Anoka Technical College has a one to two year program in Tool and Die Technology/Technician which graduated three students in 2008.
Hennepin Technical College - Brooklyn Park, MN
Hennepin Technical College, 9000 Brooklyn Blvd, Brooklyn Park, MN 55445. Hennepin Technical College is a medium sized college located in Brooklyn Park, Minnesota. It is a public school with primarily 2-year programs and has 5,617 students. Hennepin Technical College has a one to two year and an associate's degree program in Tool and Die Technology/Technician which graduated one and one students respectively in 2008.
LOCATION INFORMATION: Minneapolis, Minnesota
Minneapolis is situated in Hennepin County, Minnesota. It has a population of over 382,605. The cost of living index in Minneapolis, 101, is near the national average. New single-family homes in Minneapolis are priced at $451,300 on average, which is far greater than the state average. In 2008, forty-five new homes were constructed in Minneapolis, down from one hundred fifteen the previous year.
The top three industries for women in Minneapolis are health care, educational services, and accommodation and food services. For men, it is educational services, professional, scientific, and technical services, and accommodation and food services. The average commute to work is about 22 minutes. More than 37.4% of Minneapolis residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 13.1%, is higher than the state average.
The unemployment rate in Minneapolis is 7.0%, which is the same as Minnesota's average of 7.0%.
The percentage of Minneapolis residents that are affiliated with a religious congregation, 57.7%, is more than the national average but less than the state average. The largest religious groups are the Catholic Church, the Evangelical Lutheran Church in America and the United Methodist Church.
Minneapolis is home to the Saint Josephs Orphanage and the Hiawatha Municipal Golf Course as well as Beards Plaisance and Mississippi Park. Visitors to Minneapolis can choose from COE Mansion Carriage House, Radisson Hotel Metrodome and Best Western Kelly Inn for temporary stays in the area.