Career and Education Opportunities for Numerical Control Tool Programmers in Grand Rapids, Michigan
There are many career and education opportunities for numerical control tool programmers in the Grand Rapids, Michigan area. Currently, 1,420 people work as numerical control tool programmers in Michigan. This is expected to shrink 3% to about 1,380 people by 2016. This is better than the national trend for numerical control tool programmers, which sees this job pool shrinking by about 15.4% over the next eight years. In general, numerical control tool programmers develop programs to control machining or processing of parts by automatic machine tools, equipment, or systems.
Numerical control tool programmers earn approximately $21 hourly or $45,200 per year on average in Michigan. Nationally they average about $21 per hour or $44,310 yearly. Incomes for numerical control tool programmers are better than in the overall category of Computer Controls in Michigan, and better than the overall Computer Controls category nationally.
There are three schools within twenty-five miles of Grand Rapids where you can study to be a numerical control tool programmer, among nineteen schools of higher education total in the Grand Rapids area. Numerical control tool programmers usually hold an Associate's, or other 2-year degree, so you can expect to spend about two years training to become a numerical control tool programmer if you already have a high school diploma.
CAREER DESCRIPTION: Numerical Control Tool Programmer
In general, numerical control tool programmers develop programs to control machining or processing of parts by automatic machine tools, equipment, or systems.
Numerical control tool programmers analyze job orders, drawings, blueprints, specifications, printed circuit board pattern films, and layout data so as to calculate dimensions and feed rates. They also decide on the sequence of machine operations, and decide on the proper cutting tools needed to machine workpieces into the desired shapes. Equally important, numerical control tool programmers have to modify existing programs to enhance efficiency. They are often called upon to decide on reference points, machine cutting paths, or hole locations, and compute angular and linear dimensions, radii, and curvatures. They are expected to observe machines on trial runs or conduct computer simulations to insure that programs and machinery will function properly and produce items that meet specifications. Finally, numerical control tool programmers revise programs and/or tapes to remove errors, and retest programs to check that problems have been solved.
Every day, numerical control tool programmers are expected to be able to visualize how things come together and can be organized. They need to see details at a very fine level of focus. It is also important that they imediately see the relationships between collections of numbers, images, and patterns.
It is important for numerical control tool programmers to enter computer commands to store or retrieve components patterns or programs that transfer data to other media. They are often called upon to ready geometric layouts from graphic displays, using computer-assisted drafting software or drafting instruments and graph paper. They also compare encoded tapes or computer printouts with original part specifications and blueprints to confirm precision of instructions. They are sometimes expected to enter coordinates of hole locations into program memories by depressing pedals or buttons of programmers. Somewhat less frequently, numerical control tool programmers are also expected to write instruction sheets and cutter lists for a machine's controller so as to guide setup and encode numerical control tapes.
Numerical control tool programmers sometimes are asked to draw machine tool paths on pattern film, using colored markers and following guidelines for tool speed and efficiency. and revise programs and/or tapes to remove errors, and retest programs to check that problems have been solved. And finally, they sometimes have to observe machines on trial runs or conduct computer simulations to insure that programs and machinery will function properly and produce items that meet specifications.
Like many other jobs, numerical control tool programmers must be thorough and dependable and be able to absorb the factors involved and a problem and provide a well thought out solution.
EDUCATIONAL OPPORTUNITIES: Numerical Control Tool Programmer Training
Baker College of Muskegon - Muskegon, MI
Baker College of Muskegon, 1903 Marquette Ave, Muskegon, MI 49442. Baker College of Muskegon is a medium sized college located in Muskegon, Michigan. It is a private not-for-profit school with primarily 4-year or above programs and has 5,214 students. Baker College of Muskegon has 2 areas of study related to Numerical Control Tool Programmer. They are:
- Computer Programming/Programmer, associate's degree and bachelor's degree which graduated two and three students respectively in 2008.
- Data Processing and Data Processing Technology/Technician, associate's degree which graduated 1 student in 2008.
Grand Rapids Community College - Grand Rapids, MI
Grand Rapids Community College, 143 Bostwick Ave NE, Grand Rapids, MI 49503-3295. Grand Rapids Community College is a large college located in Grand Rapids, Michigan. It is a public school with primarily 2-year programs and has 15,403 students. Grand Rapids Community College has a one to two year and an associate's degree program in Computer Programming/Programmer which graduated one and fifteen students respectively in 2008.
Davenport University - Grand Rapids, MI
Davenport University, 6191 Kraft Avenue S.E., Grand Rapids, MI 49512-9396. Davenport University is a large university located in Grand Rapids, Michigan. It is a private not-for-profit school with primarily 4-year or above programs. It has 10,773 students and an admission rate of 91%. Davenport University has an associate's degree and a bachelor's degree program in Computer Programming/Programmer which graduated zero and seven students respectively in 2008.
LOCATION INFORMATION: Grand Rapids, Michigan
Grand Rapids is located in Kent County, Michigan. It has a population of over 193,396, which has shrunk by 2.2% over the last ten years. The cost of living index in Grand Rapids, 81, is well below the national average. New single-family homes in Grand Rapids cost $98,700 on average, which is far less than the state average. In 2008, forty-three new homes were built in Grand Rapids, down from ninety-two the previous year.
The three most popular industries for women in Grand Rapids are health care, educational services, and accommodation and food services. For men, it is construction, transportation equipment, and educational services. The average travel time to work is about 19 minutes. More than 23.8% of Grand Rapids residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 8.0%, is lower than the state average.
The unemployment rate in Grand Rapids is 15.4%, which is greater than Michigan's average of 14.3%.
The percentage of Grand Rapids residents that are affiliated with a religious congregation, 52.9%, is more than both the national and state average. Church of Jesus Christ, Immanuel Church and Trinity Church are among the churches located in Grand Rapids. The most prominent religious groups are the Catholic Church, the Christian Reformed Church in North America and the Reformed Church in America.
Grand Rapids is home to the Kent Country Club and the Walker Juvenile Court as well as Comstock Riverside Park and Richmond Park. Visitors to Grand Rapids can choose from Hampton Inn Grand Rapids, Hampton Inn Grand Rapids/North- Mi and Hampton Inn Fax for temporary stays in the area.