Career and Education Opportunities for Welders in Detroit, Michigan
Welders can find both educational opportunities and jobs in the Detroit, Michigan area. There are currently 12,260 jobs for welders in Michigan and this is projected to grow 6% to 12,990 jobs by 2016. This is better than the national trend for welders, which sees this job pool shrinking by about 1.6% over the next eight years. Welders generally use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
The income of a welder is about $16 per hour or $34,430 annually on average in Michigan. In the U.S. as a whole, their income is about $16 per hour or $33,560 per year on average. Earnings for welders are not quite as good as earnings in the general category of Foundry and Metal Work in Michigan and better than general Foundry and Metal Work category earnings nationally.
The Detroit area is home to seventy-three schools of higher education, including five within twenty-five miles of Detroit where you can get a degree as a welder. Welders usually hold less than a high school diploma, so you can expect to spend only a short time training to become a welder if you already have a high school diploma.
CAREER DESCRIPTION: Welder
In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders bolt components to set required configurations and positions for welding. They also remove rough spots from workpieces, using portable grinders or scrapers. Equally important, welders have to chip or grind off excess weld or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. They are often called upon to weld components in flat or overhead positions. They are expected to operate safety equipment and use safe work habits. Finally, welders recognize and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Every day, welders are expected to be able to control objects and devices with precise control. They need to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for welders to ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. They are often called upon to examine workpieces for defects and measure workpieces with straightedges or templates to insure conformance with specifications. They also ready all material surfaces to be welded, ensuring that there is no loose or thick scale, slag or other foreign matter. They are sometimes expected to monitor the fitting and welding processes to avoid overheating of components or warping or expansion of material. Somewhat less frequently, welders are also expected to operate manual or semi-automatic welding apparatus to fuse metal segments.
Welders sometimes are asked to operate metal shaping and bending machines, such as brakes and shears. And finally, they sometimes have to decide on and install torches, torch tips and flux, in line with welding chart specifications or types and thicknesses of metals.
Like many other jobs, welders must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Detroit include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Cabinet Maker. Cut, shape, and assemble wooden articles or set up and operate a variety of woodworking machines, such as power saws, jointers, and mortisers to surface, cut, or shape lumber or to fabricate parts for wood products.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Machinist. Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, shop mathematics, and machining procedures.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Tool and Die Maker. Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Welder Training
Schoolcraft College - Livonia, MI
Schoolcraft College, 18600 Haggerty Road, Livonia, MI 48152-2696. Schoolcraft College is a large college located in Livonia, Michigan. It is a public school with primarily 2-year programs and has 12,560 students. Schoolcraft College has a one to two year and an associate's degree program in Welding Technology/Welder which graduated five and three students respectively in 2008.
Monroe County Community College - Monroe, MI
Monroe County Community College, 1555 South Raisinville Road, Monroe, MI 48161-9746. Monroe County Community College is a small college located in Monroe, Michigan. It is a public school with primarily 2-year programs and has 4,514 students. Monroe County Community College has less than one year, one to two year, and associate's degree programs in Welding Technology/Welder which graduated seven, two, and two students respectively in 2008.
Wayne County Community College District - Detroit, MI
Wayne County Community College District, 801 W Fort St, Detroit, MI 48226. Wayne County Community College District is a large college located in Detroit, Michigan. It is a public school with primarily 2-year programs and has 21,540 students. Wayne County Community College District has a one to two year program in Welding Technology/Welder which graduated one student in 2008.
Washtenaw Community College - Ann Arbor, MI
Washtenaw Community College, 4800 E Huron River Dr, Ann Arbor, MI 48105-4800. Washtenaw Community College is a large college located in Ann Arbor, Michigan. It is a public school with primarily 2-year programs and has 12,906 students. Washtenaw Community College has a less than one year and an associate's degree program in Welding Technology/Welder which graduated eighteen and eleven students respectively in 2008.
Oakland Community College - Bloomfield Hills, MI
Oakland Community College, 2480 Opdyke Rd, Bloomfield Hills, MI 48304-2266. Oakland Community College is a large college located in Bloomfield Hills, Michigan. It is a public school with primarily 2-year programs and has 24,957 students. Oakland Community College has a less than one year program in Welding Technology/Welder which graduated three students in 2008.
Radiographic Interpreter: The program, based upon requirements contained within AWS B5.
For more information, see the American Welding Society website.
Certified Robotic Arc Welding: The Certification Program for Robotic Arc Welding - Operators and Technicians (CRAW) allows many welding personnel employed in various welding sectors to measure themselves against standards for their occupation.
For more information, see the American Welding Society website.
LOCATION INFORMATION: Detroit, Michigan
Detroit is located in Wayne County, Michigan. It has a population of over 912,062, which has shrunk by 4.1% in the past ten years. The cost of living index in Detroit, 86, is well below the national average. New single-family homes in Detroit are priced at $108,900 on average, which is well below the state average. In 2008, eighty-five new homes were built in Detroit, down from one hundred fifty-four the previous year.
The three big industries for women in Detroit are health care, educational services, and transportation equipment. For men, it is transportation equipment, construction, and administrative and support and waste management services. The average commute to work is about 28 minutes. More than 11.0% of Detroit residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 4.2%, is lower than the state average.
The unemployment rate in Detroit is 27.0%, which is greater than Michigan's average of 14.3%.
The percentage of Detroit residents that are affiliated with a religious congregation, 37.7%, is less than both the national and state average. The most common religious groups are the Catholic Church, the Muslim Estimate and the Lutheran Church.
Detroit is home to the Memorial Park Marina and the Detroit Golf Club as well as Chene Park and Mallett Playground. Visitors to Detroit can choose from Corktown Inn, Clark's Motel and Days Inn of Downtown Detroit for temporary stays in the area.