Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Structural and Ornamental Metalwork Metal Fabricators in Cambridge, Massachusetts

Many educational and employment opportunities exist for structural and ornamental metalwork metal fabricators in the Cambridge, Massachusetts area. About 1,590 people are currently employed as structural and ornamental metalwork metal fabricators in Massachusetts. By 2016, this is expected to shrink 8% to about 1,470 people employed. This is not quite as good as the national trend for structural and ornamental metalwork metal fabricators, which sees this job pool shrinking by about 0.4% over the next eight years. Structural and ornamental metalwork metal fabricators generally fabricate, lay out, and fit parts of structural metal products.

Structural and ornamental metalwork metal fabricators earn approximately $17 hourly or $37,000 per year on average in Massachusetts. Nationally they average about $15 per hour or $32,400 yearly. Structural and ornamental metalwork metal fabricators earn more than people working in the category of Assembling and Fabrication generally in Massachusetts and more than people in the Assembling and Fabrication category nationally.

There is one school within twenty-five miles of Cambridge where you can study to be a structural and ornamental metalwork metal fabricator, among 149 schools of higher education total in the Cambridge area. The most common level of education for structural and ornamental metalwork metal fabricators is a high school diploma or GED. It will take only a short time to learn to be a structural and ornamental metalwork metal fabricator if you already have a high school diploma.

CAREER DESCRIPTION: Structural and Ornamental Metalwork Metal Fabricator

Structural and Ornamental Metalwork Metal Fabricator video from the State of New Jersey Dept. of Labor and Workforce Development

In general, structural and ornamental metalwork metal fabricators fabricate, lay out, and fit parts of structural metal products.

Structural and ornamental metalwork metal fabricators position and weld components to fashion complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools. They also move components into position, manually or with hoists or cranes. Equally important, structural and ornamental metalwork metal fabricators have to lay out and examine metal stock or workpieces to be processed to insure that specifications are met. They are often called upon to verify conformance of workpieces to given requirements, using squares, rulers, and measuring tapes. They are expected to tack-weld fitted components together. Finally, structural and ornamental metalwork metal fabricators smooth workpiece edges and fix taps, tubes, and valves.

Every day, structural and ornamental metalwork metal fabricators are expected to be able to visualize how things come together and can be organized. They need to see details at a very fine level of focus. It is also important that they maintain precise control of objects and devices through a range of movements.

It is important for structural and ornamental metalwork metal fabricators to straighten warped or bent components, using sledges or bulldozers. They are often called upon to direct welders to build up low spots or short pieces with weld. They also align and fit components according to given requirements, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers. They are sometimes expected to layout and construct templates and fixtures, using hand tools. Somewhat less frequently, structural and ornamental metalwork metal fabricators are also expected to heat-treat components, using acetylene torches.

Structural and ornamental metalwork metal fabricators sometimes are asked to hammer and grind workpieces to cut and straighten metal. And finally, they sometimes have to verify conformance of workpieces to given requirements, using squares, rulers, and measuring tapes.

Like many other jobs, structural and ornamental metalwork metal fabricators must be thorough and dependable and be reliable.

Similar jobs with educational opportunities in Cambridge include:

  • Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
  • Electromechanical Equipment Assembler. Assemble or modify electromechanical equipment or devices, such as servomechanisms, gyros, and appliances.

EDUCATIONAL OPPORTUNITIES: Structural and Ornamental Metalwork Metal Fabricator Training

Nashua Community College - Nashua, NH

Nashua Community College, 505 Amherst St, Nashua, NH 03063-1026. Nashua Community College is a small college located in Nashua, New Hampshire. It is a public school with primarily 2-year programs and has 1,925 students. Nashua Community College has a less than one year program in Machine Shop Technology/Assistant which graduated three students in 2008.

LOCATION INFORMATION: Cambridge, Massachusetts

Cambridge, Massachusetts
Cambridge, Massachusetts photo by Scs

Cambridge is located in Middlesex County, Massachusetts. It has a population of over 105,596, which has grown by 4.2% in the past ten years. The cost of living index in Cambridge, 142, is far greater than the national average. New single-family homes in Cambridge are priced at $1,078,700 on average, which is far greater than the state average. In 2008, twelve new homes were constructed in Cambridge, down from twenty-five the previous year.

The top three industries for women in Cambridge are educational services, professional, scientific, and technical services, and health care. For men, it is educational services, professional, scientific, and technical services, and health care. The average travel time to work is about 24 minutes. More than 65.1% of Cambridge residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 38.5%, is higher than the state average.

The unemployment rate in Cambridge is 5.6%, which is less than Massachusetts's average of 8.4%.

The percentage of Cambridge residents that are affiliated with a religious congregation, 73.6%, is more than both the national and state average. Western Avenue Baptist Church, Massachusetts Institute of Technology Chapel and Cambridgeport Baptist Church are some of the churches located in Cambridge. The largest religious groups are the Catholic Church, the United Church of Christ and the Episcopal Church.

Cambridge is home to the Great Court and the Cutter Square as well as John A Ahern Field and Sheridan Square. Shopping malls in the area include Porter Square Shopping Center, The Atrium Shopping Center and Cambridgeside Galleria Shopping Center.