Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.

Career and Education Opportunities for Stone Cutters in Lexington-Fayette, Kentucky

For those living in the Lexington-Fayette, Kentucky area, there are many career and education opportunities for stone cutters. There are currently 980 working stone cutters in Kentucky; this should shrink by 3% to about 960 working stone cutters in the state by 2016. This is not quite as good as the nation as a whole, where employment opportunities for stone cutters are expected to grow by about 2.8%. In general, stone cutters cut or carve stone according to diagrams and patterns.

Stone cutters earn about $11 per hour or $23,130 annually on average in Kentucky and about $13 per hour or $27,870 annually on average nationally. Compared with people working in the overall category of Stone and Glass, people working as stone cutters in Kentucky earn less. They earn less than people working in the overall category of Stone and Glass nationally.

The Lexington-Fayette area is home to twenty-two schools of higher education, including one within twenty-five miles of Lexington-Fayette where you can get a degree as a stone cutter. Stone cutters usually hold a high school diploma or GED, so you can expect to spend only a short time studying to be a stone cutter if you already have a high school diploma.


Stone Cutter video from the State of New Jersey Dept. of Labor and Workforce Development

In general, stone cutters cut or carve stone according to diagrams and patterns.

Stone cutters verify depths and dimensions of cuts or carvings to insure adherence to given requirements or models, using measuring instruments. They also drill holes and cut or carve moldings and grooves in stone, in line with diagrams and patterns. Equally important, stone cutters have to carve rough designs freehand or by chipping along marks on stone, using mallets and chisels or pneumatic tools. They are often called upon to lay out designs or dimensions from sketches or blueprints on stone surfaces, by freehand or by transferring them from tracing paper, using scribes or chalk and measuring instruments. They are expected to cut and finish rough blocks of building or monumental stone, in line with diagrams or patterns. Finally, stone cutters smooth surfaces of carvings, using rubbing stones.

Every day, stone cutters are expected to be able to control objects and devices with precise control. It is also important that they see details at a very fine level of focus.

It is important for stone cutters to dress stone surfaces, using bushhammers. They are often called upon to guide nozzles over stone following stencil outlines, or chip along marks to generate designs or to work surfaces down to specified finishes. They also load sandblasting equipment with abrasives, attach nozzles to hoses, and turn valves to admit compressed air and activate jets. Somewhat less frequently, stone cutters are also expected to copy drawings on rough clay or plaster models.

and decide on chisels, pneumatic or surfacing tools, or sandblasting nozzles, and decide on sequence of use. And finally, they sometimes have to move fingers over surfaces of carvings to insure smoothness of finish.

Like many other jobs, stone cutters must be thorough and dependable and be reliable.


Bluegrass Community and Technical College - Lexington, KY

Bluegrass Community and Technical College, 470 Cooper Drive, Lexington, KY 40506. Bluegrass Community and Technical College is a large college located in Lexington, Kentucky. It is a public school with primarily 2-year programs and has 12,200 students. Bluegrass Community and Technical College has a less than one year and a one to two year program in Mason/Masonry which graduated thirty-eight and ten students respectively in 2008.

LOCATION INFORMATION: Lexington-Fayette, Kentucky

Lexington-Fayette, Kentucky
Lexington-Fayette, Kentucky photo by Jonesey

Lexington-Fayette is located in Fayette County, Kentucky. It has a population of over 282,114, which has grown by 8.3% over the last ten years. The cost of living index in Lexington-Fayette, 84, is well below the national average. New single-family homes in Lexington-Fayette are valued at $167,600 on average, which is well above the state average. In 2008, seven hundred seventy-one new homes were built in Lexington-Fayette, down from 1,227 the previous year.

The three big industries for women in Lexington-Fayette are health care, educational services, and accommodation and food services. For men, it is educational services, construction, and accommodation and food services. The average travel time to work is about 19 minutes. More than 35.6% of Lexington-Fayette residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 14.5%, is higher than the state average.

The percentage of Lexington-Fayette residents that are affiliated with a religious congregation, 47.3%, is less than both the national and state average. Victory Baptist Church, Aldersgate Church and Trinity Hill United Methodist Church are all churches located in Lexington-Fayette. The largest religious groups are the Southern Baptist Convention, the Catholic Church and the United Methodist Church.

Lexington-Fayette is home to the Tates Creek Country Club and the Home of Henry Clay as well as Kentucky State Horse Park and Duncan Park. Shopping centers in the area include Fayette Mall, Turfland Mall and Lexington Mall.