Career and Education Opportunities for Welding Operators in Lexington-Fayette, Kentucky
Many educational and employment opportunities exist for welding operators in the Lexington-Fayette, Kentucky area. The national trend for welding operators sees this job pool shrinking by about 7.0% over the next eight years. In general, welding operators set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
Welding operators earn approximately $14 hourly or $29,800 annually on average in Kentucky. Nationally they average about $15 hourly or $31,610 annually. Incomes for welding operators are not quite as good as in the overall category of Foundry and Metal Work in Kentucky, and not quite as good as the overall Foundry and Metal Work category nationally.
There is one school within twenty-five miles of Lexington-Fayette where you can study to be a welding operator, among twenty-two schools of higher education total in the Lexington-Fayette area. Given that the most common education level for welding operators is a high school diploma or GED, you can expect to spend only a short time studying to be a welding operator if you already have a high school diploma.
CAREER DESCRIPTION: Welding Operator
In general, welding operators set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
Every day, welding operators are expected to be able to articulate ideas and problems. They need to see details at a very fine level of focus. It is also important that they move quickly in order to hold onto or control objects and devices.
It is important for welding operators to give directions to other staff regarding machine set-up and use. They are often called upon to prepare and tend welding machines that join or bond components to fabricate metal products or assemblies. They also load or feed workpieces into welding machines to join or bond components. They are sometimes expected to correct problems by adjusting controls or by stopping machines and opening holding devices. Somewhat less frequently, welding operators are also expected to read blueprints and production schedules to establish product or job instructions and specifications.
Welding operators sometimes are asked to observe meters and machine operations to insure that soldering or brazing processes meet specifications. They also have to be able to tend auxiliary equipment used in welding processes And finally, they sometimes have to prepare and tend welding machines that join or bond components to fabricate metal products or assemblies.
Like many other jobs, welding operators must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Lexington-Fayette include:
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
EDUCATIONAL OPPORTUNITIES: Welding Operator Training
Bluegrass Community and Technical College - Lexington, KY
Bluegrass Community and Technical College, 470 Cooper Drive, Lexington, KY 40506. Bluegrass Community and Technical College is a large college located in Lexington, Kentucky. It is a public school with primarily 2-year programs and has 12,200 students. Bluegrass Community and Technical College has less than one year, one to two year, and associate's degree programs in Welding Technology/Welder which graduated 143, three, and two students respectively in 2008.
LOCATION INFORMATION: Lexington-Fayette, Kentucky
Lexington-Fayette is located in Fayette County, Kentucky. It has a population of over 282,114, which has grown by 8.3% over the last ten years. The cost of living index in Lexington-Fayette, 84, is well below the national average. New single-family homes in Lexington-Fayette are valued at $167,600 on average, which is well above the state average. In 2008, seven hundred seventy-one new homes were built in Lexington-Fayette, down from 1,227 the previous year.
The three big industries for women in Lexington-Fayette are health care, educational services, and accommodation and food services. For men, it is educational services, construction, and accommodation and food services. The average travel time to work is about 19 minutes. More than 35.6% of Lexington-Fayette residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 14.5%, is higher than the state average.
The percentage of Lexington-Fayette residents that are affiliated with a religious congregation, 47.3%, is less than both the national and state average. Victory Baptist Church, Aldersgate Church and Trinity Hill United Methodist Church are all churches located in Lexington-Fayette. The largest religious groups are the Southern Baptist Convention, the Catholic Church and the United Methodist Church.
Lexington-Fayette is home to the Tates Creek Country Club and the Home of Henry Clay as well as Kentucky State Horse Park and Duncan Park. Shopping centers in the area include Fayette Mall, Turfland Mall and Lexington Mall.