Career and Education Opportunities for Welders in Atlanta, Georgia
Many educational and employment opportunities exist for welders in the Atlanta, Georgia area. About 11,800 people are currently employed as welders in Georgia. By 2016, this is expected to grow 18% to 13,880 people employed. This is better than the nation as a whole, where employment opportunities for welders are expected to shrink by about 1.6%. Welders generally use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders earn approximately $14 hourly or $31,110 per year on average in Georgia. Nationally they average about $16 hourly or $33,560 yearly. Compared with people working in the overall category of Foundry and Metal Work, people working as welders in Georgia earn more. They earn more than people working in the overall category of Foundry and Metal Work nationally.
The Atlanta area is home to ninety-one schools of higher education, including five within twenty-five miles of Atlanta where you can get a degree as a welder. The most common level of education for welders is less than a high school diploma. You can expect to spend only a short time training to become a welder if you already have a high school diploma.
CAREER DESCRIPTION: Welder
In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders bolt components to set required configurations and positions for welding. They also remove rough spots from workpieces, using portable grinders or scrapers. Equally important, welders have to chip or grind off excess weld or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. They are often called upon to weld components in flat or overhead positions. They are expected to operate safety equipment and use safe work habits. Finally, welders recognize and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Every day, welders are expected to be able to control objects and devices with precise control. They need to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for welders to ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. They are often called upon to examine workpieces for defects and measure workpieces with straightedges or templates to insure conformance with specifications. They also ready all material surfaces to be welded, ensuring that there is no loose or thick scale, slag or other foreign matter. They are sometimes expected to monitor the fitting and welding processes to avoid overheating of components or warping or expansion of material. Somewhat less frequently, welders are also expected to operate manual or semi-automatic welding apparatus to fuse metal segments.
Welders sometimes are asked to operate metal shaping and bending machines, such as brakes and shears. And finally, they sometimes have to decide on and install torches, torch tips and flux, in line with welding chart specifications or types and thicknesses of metals.
Like many other jobs, welders must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Atlanta include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Cabinet Maker. Cut, shape, and assemble wooden articles or set up and operate a variety of woodworking machines, such as power saws, jointers, and mortisers to surface, cut, or shape lumber or to fabricate parts for wood products.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Machinist. Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, shop mathematics, and machining procedures.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Structural and Ornamental Metalwork Metal Fabricator. Fabricate, lay out, and fit parts of structural metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Welder Training
Atlanta Technical College - Atlanta, GA
Atlanta Technical College, 1560 Metropolitan Pky SW, Atlanta, GA 30310-4446. Atlanta Technical College is a small college located in Atlanta, Georgia. It is a public school with primarily 2-year programs and has 3,293 students. Atlanta Technical College has a less than one year and a one to two year program in Welding Technology/Welder which graduated eleven and two students respectively in 2008.
Griffin Technical College - Griffin, GA
Griffin Technical College, 501 Varsity Rd, Griffin, GA 30223-2042. Griffin Technical College is a small college located in Griffin, Georgia. It is a public school with primarily 2-year programs and has 4,162 students. Griffin Technical College has a less than one year and a one to two year program in Welding Technology/Welder which graduated forty and three students respectively in 2008.
Lanier Technical College - Oakwood, GA
Lanier Technical College, 2990 Landrum Education Dr, Oakwood, GA 30566. Lanier Technical College is a small college located in Oakwood, Georgia. It is a public school with primarily 2-year programs and has 3,168 students. Lanier Technical College has a less than one year and a one to two year program in Welding Technology/Welder which graduated thirty and three students respectively in 2008.
Gwinnett Technical College - Lawrenceville, GA
Gwinnett Technical College, 5150 Sugarloaf Parkway, Lawrenceville, GA 30043-5702. Gwinnett Technical College is a medium sized college located in Lawrenceville, Georgia. It is a public school with primarily 2-year programs and has 5,299 students. Gwinnett Technical College has a less than one year and a one to two year program in Welding Technology/Welder which graduated fifty-two and four students respectively in 2008.
Dekalb Technical College - Clarkston, GA
Dekalb Technical College, 495 N Indian Creek Dr, Clarkston, GA 30021-2397. Dekalb Technical College is a small college located in Clarkston, Georgia. It is a public school with primarily 2-year programs and has 3,939 students. Dekalb Technical College has a less than one year and a one to two year program in Welding Technology/Welder which graduated thirty and one students respectively in 2008.
Radiographic Interpreter: The program, based upon requirements contained within AWS B5.
For more information, see the American Welding Society website.
Certified Robotic Arc Welding: The Certification Program for Robotic Arc Welding - Operators and Technicians (CRAW) allows many welding personnel employed in various welding sectors to measure themselves against standards for their occupation.
For more information, see the American Welding Society website.
LOCATION INFORMATION: Atlanta, Georgia
Atlanta is located in Fulton County, Georgia. It has a population of over 537,958, which has grown by 29.2% over the last ten years. The cost of living index in Atlanta, 94, is below the national average. New single-family homes in Atlanta cost $173,200 on average, which is well above the state average. In 2008, five hundred two new homes were constructed in Atlanta, down from 1,247 the previous year.
The three most popular industries for women in Atlanta are educational services, professional, scientific, and technical services, and health care. For men, it is professional, scientific, and technical services, construction, and accommodation and food services. The average commute to work is about 28 minutes. More than 34.6% of Atlanta residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 13.8%, is higher than the state average.
The unemployment rate in Atlanta is 11.1%, which is greater than Georgia's average of 10.1%.
The percentage of Atlanta residents that are affiliated with a religious congregation, 58.7%, is more than both the national and state average. Aarons Tabernacle Church, Welcome Home Baptist Church and Adair Park Church are some of the churches located in Atlanta. The largest religious groups are the Southern Baptist Convention, the United Methodist Church and the Catholic Church.
Atlanta is home to the Martin Luther King Junior Community Center and the Diuid Hills Golf Club as well as Alexander Park and Wesley Avenue Park. Shopping malls in the area include Rio Mall Shopping Center, Collier Heights Plaza Shopping Center and Northside Parkway Shopping Center. Visitors to Atlanta can choose from Country Inn-Stes Atl Dwntwn S, Comfort Inn and Comfort Inn Buckhead North for temporary stays in the area.