Career and Education Opportunities for Layout Technicians in Atlanta, Georgia
Many educational and employment opportunities exist for layout technicians in the Atlanta, Georgia area. Currently, 170 people work as layout technicians in Georgia. This is expected to shrink by 18% to about 140 people by 2016. This is not quite as good as the nation as a whole, where employment opportunities for layout technicians are expected to shrink by about 11.6%. In general, layout technicians lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing.
Income for layout technicians is about $16 hourly or $34,590 per year on average in Georgia. Nationally, their income is about $16 per hour or $34,920 annually. Incomes for layout technicians are better than in the overall category of Foundry and Metal Work in Georgia, and better than the overall Foundry and Metal Work category nationally.
The Atlanta area is home to ninety-one schools of higher education, including four within twenty-five miles of Atlanta where you can get a degree as a layout technician. The most common level of education for layout technicians is a high school diploma or GED. It will take only a short time to learn to be a layout technician if you already have a high school diploma.
CAREER DESCRIPTION: Layout Technician
In general, layout technicians lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. They also includes shipfitters.
Layout technicians fit and align fabricated components to be welded or assembled. They also lift and position workpieces in relation to surface plates, manually or with hoists. Equally important, layout technicians have to lay out and fabricate metal structural components such as plates and frames. Finally, layout technicians mark curves and welding symbols onto workpieces, using scribes, soapstones, punches, and hand drills.
Every day, layout technicians are expected to be able to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for layout technicians to locate center lines and verify template positions, using measuring instruments such as gauge blocks and dial indicators. They are often called upon to compute layout dimensions, and decide on and mark reference points on metal stock or workpieces for further processing, such as welding and assembly. They also formulate and develop layouts from blueprints and templates, applying knowledge of trigonometry, layout, effects of heat, and properties of metals. They are sometimes expected to formulate locations and sequences of cutting and welding operations, using compasses and rules. Somewhat less frequently, layout technicians are also expected to add dimensional details to blueprints or drawings made by other staff.
Layout technicians sometimes are asked to add dimensional details to blueprints or drawings made by other staff. And finally, they sometimes have to formulate and develop layouts from blueprints and templates, applying knowledge of trigonometry, layout, effects of heat, and properties of metals.
Like many other jobs, layout technicians must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Atlanta include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Layout Technician Training
Griffin Technical College - Griffin, GA
Griffin Technical College, 501 Varsity Rd, Griffin, GA 30223-2042. Griffin Technical College is a small college located in Griffin, Georgia. It is a public school with primarily 2-year programs and has 4,162 students. Griffin Technical College has a less than one year and a one to two year program in Machine Shop Technology/Assistant which graduated five and four students respectively in 2008.
Lanier Technical College - Oakwood, GA
Lanier Technical College, 2990 Landrum Education Dr, Oakwood, GA 30566. Lanier Technical College is a small college located in Oakwood, Georgia. It is a public school with primarily 2-year programs and has 3,168 students. Lanier Technical College has less than one year, one to two year, and two to four year programs in Machine Shop Technology/Assistant which graduated five, three, and two students respectively in 2008.
Gwinnett Technical College - Lawrenceville, GA
Gwinnett Technical College, 5150 Sugarloaf Parkway, Lawrenceville, GA 30043-5702. Gwinnett Technical College is a medium sized college located in Lawrenceville, Georgia. It is a public school with primarily 2-year programs and has 5,299 students. Gwinnett Technical College has a less than one year and a one to two year program in Machine Shop Technology/Assistant which graduated twenty-five and six students respectively in 2008.
Dekalb Technical College - Clarkston, GA
Dekalb Technical College, 495 N Indian Creek Dr, Clarkston, GA 30021-2397. Dekalb Technical College is a small college located in Clarkston, Georgia. It is a public school with primarily 2-year programs and has 3,939 students. Dekalb Technical College has less than one year, one to two year, and associate's degree programs in Machine Shop Technology/Assistant which graduated three, one, and one students respectively in 2008.
LOCATION INFORMATION: Atlanta, Georgia
Atlanta is located in Fulton County, Georgia. It has a population of over 537,958, which has grown by 29.2% over the last ten years. The cost of living index in Atlanta, 94, is below the national average. New single-family homes in Atlanta cost $173,200 on average, which is well above the state average. In 2008, five hundred two new homes were constructed in Atlanta, down from 1,247 the previous year.
The three most popular industries for women in Atlanta are educational services, professional, scientific, and technical services, and health care. For men, it is professional, scientific, and technical services, construction, and accommodation and food services. The average commute to work is about 28 minutes. More than 34.6% of Atlanta residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 13.8%, is higher than the state average.
The unemployment rate in Atlanta is 11.1%, which is greater than Georgia's average of 10.1%.
The percentage of Atlanta residents that are affiliated with a religious congregation, 58.7%, is more than both the national and state average. Aarons Tabernacle Church, Welcome Home Baptist Church and Adair Park Church are some of the churches located in Atlanta. The largest religious groups are the Southern Baptist Convention, the United Methodist Church and the Catholic Church.
Atlanta is home to the Martin Luther King Junior Community Center and the Diuid Hills Golf Club as well as Alexander Park and Wesley Avenue Park. Shopping malls in the area include Rio Mall Shopping Center, Collier Heights Plaza Shopping Center and Northside Parkway Shopping Center. Visitors to Atlanta can choose from Country Inn-Stes Atl Dwntwn S, Comfort Inn and Comfort Inn Buckhead North for temporary stays in the area.