Career and Education Opportunities for Heat Treating Equipment Operators in Atlanta, Georgia
Heat treating equipment operators can find many career and educational opportunities in the Atlanta, Georgia area. The national trend for heat treating equipment operators sees this job pool shrinking by about 10.6% over the next eight years. In general, heat treating equipment operators set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
A person working as a heat treating equipment operator can expect to earn about $15 per hour or $31,810 annually on average in Georgia and about $15 hourly or $32,030 annually on average in the U.S. as a whole. Earnings for heat treating equipment operators are better than earnings in the general category of Foundry and Metal Work in Georgia and not quite as good as general Foundry and Metal Work category earnings nationally.
The Atlanta area is home to ninety-one schools of higher education, including four within twenty-five miles of Atlanta where you can get a degree as a heat treating equipment operator. Given that the most common education level for heat treating equipment operators is a high school diploma or GED, it will take only a short time to learn to be a heat treating equipment operator if you already have a high school diploma.
CAREER DESCRIPTION: Heat Treating Equipment Operator
In general, heat treating equipment operators set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
Every day, heat treating equipment operators are expected to be able to respond quickly in general. They need to focus attention on specific tasks without being distracted. It is also important that they maintain precise control of objects and devices through a range of movements.
It is important for heat treating equipment operators to remove components from furnaces after specified times, and air dry or cool components in water or other baths. They are often called upon to read production schedules and work orders to establish processing sequences and heat cycle requirements for objects to be heat-treated. They also decide on types and temperatures of baths and quenching media needed to attain specified part hardness and ductility, using heat-treating charts and knowledge of methods and metals. They are sometimes expected to record times that components are removed from furnaces to document that objects have attained specified temperatures for specified times. Somewhat less frequently, heat treating equipment operators are also expected to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations.
Heat treating equipment operators sometimes are asked to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations. They also have to be able to examine components to insure metal shades and colors conform to given requirements, utilizing knowledge of metal heat-treating And finally, they sometimes have to decide on flame temperatures and induction heating coils needed, on the basis of degree of hardness required and properties of stock to be treated.
Like many other jobs, heat treating equipment operators must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Atlanta include:
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Heat Treating Equipment Operator Training
Griffin Technical College - Griffin, GA
Griffin Technical College, 501 Varsity Rd, Griffin, GA 30223-2042. Griffin Technical College is a small college located in Griffin, Georgia. It is a public school with primarily 2-year programs and has 4,162 students. Griffin Technical College has a less than one year and a one to two year program in Machine Shop Technology/Assistant which graduated five and four students respectively in 2008.
Lanier Technical College - Oakwood, GA
Lanier Technical College, 2990 Landrum Education Dr, Oakwood, GA 30566. Lanier Technical College is a small college located in Oakwood, Georgia. It is a public school with primarily 2-year programs and has 3,168 students. Lanier Technical College has less than one year, one to two year, and two to four year programs in Machine Shop Technology/Assistant which graduated five, three, and two students respectively in 2008.
Gwinnett Technical College - Lawrenceville, GA
Gwinnett Technical College, 5150 Sugarloaf Parkway, Lawrenceville, GA 30043-5702. Gwinnett Technical College is a medium sized college located in Lawrenceville, Georgia. It is a public school with primarily 2-year programs and has 5,299 students. Gwinnett Technical College has a less than one year and a one to two year program in Machine Shop Technology/Assistant which graduated twenty-five and six students respectively in 2008.
Dekalb Technical College - Clarkston, GA
Dekalb Technical College, 495 N Indian Creek Dr, Clarkston, GA 30021-2397. Dekalb Technical College is a small college located in Clarkston, Georgia. It is a public school with primarily 2-year programs and has 3,939 students. Dekalb Technical College has less than one year, one to two year, and associate's degree programs in Machine Shop Technology/Assistant which graduated three, one, and one students respectively in 2008.
LOCATION INFORMATION: Atlanta, Georgia
Atlanta is located in Fulton County, Georgia. It has a population of over 537,958, which has grown by 29.2% over the last ten years. The cost of living index in Atlanta, 94, is below the national average. New single-family homes in Atlanta cost $173,200 on average, which is well above the state average. In 2008, five hundred two new homes were constructed in Atlanta, down from 1,247 the previous year.
The three most popular industries for women in Atlanta are educational services, professional, scientific, and technical services, and health care. For men, it is professional, scientific, and technical services, construction, and accommodation and food services. The average commute to work is about 28 minutes. More than 34.6% of Atlanta residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 13.8%, is higher than the state average.
The unemployment rate in Atlanta is 11.1%, which is greater than Georgia's average of 10.1%.
The percentage of Atlanta residents that are affiliated with a religious congregation, 58.7%, is more than both the national and state average. Aarons Tabernacle Church, Welcome Home Baptist Church and Adair Park Church are some of the churches located in Atlanta. The largest religious groups are the Southern Baptist Convention, the United Methodist Church and the Catholic Church.
Atlanta is home to the Martin Luther King Junior Community Center and the Diuid Hills Golf Club as well as Alexander Park and Wesley Avenue Park. Shopping malls in the area include Rio Mall Shopping Center, Collier Heights Plaza Shopping Center and Northside Parkway Shopping Center. Visitors to Atlanta can choose from Country Inn-Stes Atl Dwntwn S, Comfort Inn and Comfort Inn Buckhead North for temporary stays in the area.