Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Buffing Machine Operators in Atlanta, Georgia

Buffing machine operators can find both educational opportunities and jobs in the Atlanta, Georgia area. About 1,710 people are currently employed as buffing machine operators in Georgia. By 2016, this is expected to shrink by 7% to about 1,590 people employed. This is better than the nation as a whole, where employment opportunities for buffing machine operators are expected to shrink by about 15.9%. In general, buffing machine operators set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

Buffing machine operators earn about $13 hourly or $28,130 annually on average in Georgia and about $14 per hour or $29,460 yearly on average nationally. Incomes for buffing machine operators are not quite as good as in the overall category of Foundry and Metal Work in Georgia, and not quite as good as the overall Foundry and Metal Work category nationally.

There are ninety-one schools of higher education in the Atlanta area, including four within twenty-five miles of Atlanta where you can get a degree to start your career as a buffing machine operator. Given that the most common education level for buffing machine operators is a high school diploma or GED, you can expect to spend only a short time training to become a buffing machine operator if you already have a high school diploma.

CAREER DESCRIPTION: Buffing Machine Operator

In general, buffing machine operators set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

Buffing machine operators inspect or measure finished workpieces to establish conformance to given requirements, using measuring instruments such as gauges or micrometers. They also observe machine operations to uncover any problems; make needed adjustments to fix problems. Equally important, buffing machine operators have to activate machine start-up switches to grind or cut workpieces, according to given requirements. Finally, buffing machine operators prepare grinding tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic workpieces.

Every day, buffing machine operators are expected to be able to maintain precise control of objects and devices through a range of movements. It is also important that they respond quickly in general.

It is important for buffing machine operators to lift and position workpieces, manually or with hoists, and secure them in hoppers or on machine tables or chucks, using clamps. They are often called upon to measure workpieces and lay out work, using precision measuring devices. They also set and adjust machine controls in line with product specifications, utilizing knowledge of machine operation. They are sometimes expected to move machine controls to index workpieces, and to modify machines for pre-selected operational settings. Somewhat less frequently, buffing machine operators are also expected to adjust air cylinders and setting stops to set traverse lengths and feed arm strokes.

Buffing machine operators sometimes are asked to prepare grinding tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic workpieces. and maintain stocks of machine components and machining tools. And finally, they sometimes have to set and adjust machine controls in line with product specifications, utilizing knowledge of machine operation.

Like many other jobs, buffing machine operators must be thorough and dependable and be reliable.

Similar jobs with educational opportunities in Atlanta include:

  • Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
  • Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
  • Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
  • Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
  • Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
  • Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
  • Woodworking Machine Setter and Operator. Set up, operate, or tend woodworking machines, such as drill presses, lathes, and wood nailing machines.

EDUCATIONAL OPPORTUNITIES: Buffing Machine Operator Training

Griffin Technical College - Griffin, GA

Griffin Technical College, 501 Varsity Rd, Griffin, GA 30223-2042. Griffin Technical College is a small college located in Griffin, Georgia. It is a public school with primarily 2-year programs and has 4,162 students. Griffin Technical College has a less than one year and a one to two year program in Machine Shop Technology/Assistant which graduated five and four students respectively in 2008.

Lanier Technical College - Oakwood, GA

Lanier Technical College, 2990 Landrum Education Dr, Oakwood, GA 30566. Lanier Technical College is a small college located in Oakwood, Georgia. It is a public school with primarily 2-year programs and has 3,168 students. Lanier Technical College has less than one year, one to two year, and two to four year programs in Machine Shop Technology/Assistant which graduated five, three, and two students respectively in 2008.

Gwinnett Technical College - Lawrenceville, GA

Gwinnett Technical College, 5150 Sugarloaf Parkway, Lawrenceville, GA 30043-5702. Gwinnett Technical College is a medium sized college located in Lawrenceville, Georgia. It is a public school with primarily 2-year programs and has 5,299 students. Gwinnett Technical College has a less than one year and a one to two year program in Machine Shop Technology/Assistant which graduated twenty-five and six students respectively in 2008.

Dekalb Technical College - Clarkston, GA

Dekalb Technical College, 495 N Indian Creek Dr, Clarkston, GA 30021-2397. Dekalb Technical College is a small college located in Clarkston, Georgia. It is a public school with primarily 2-year programs and has 3,939 students. Dekalb Technical College has less than one year, one to two year, and associate's degree programs in Machine Shop Technology/Assistant which graduated three, one, and one students respectively in 2008.

CERTIFICATIONS

Precision Sheet Metal Operator: PSMO Certification is the metal fabricating industry's first comprehensive exam designed to assess a candidate's knowledge of fundamental precision sheet metal fabrication processes in shearing, sawing, press brake, turret punch press, laser cutting, and mechanical finishing.

For more information, see the Fabricators & Manufacturers Association, International website.

LOCATION INFORMATION: Atlanta, Georgia

Atlanta, Georgia
Atlanta, Georgia photo by Evilarry

Atlanta is located in Fulton County, Georgia. It has a population of over 537,958, which has grown by 29.2% over the last ten years. The cost of living index in Atlanta, 94, is below the national average. New single-family homes in Atlanta cost $173,200 on average, which is well above the state average. In 2008, five hundred two new homes were constructed in Atlanta, down from 1,247 the previous year.

The three most popular industries for women in Atlanta are educational services, professional, scientific, and technical services, and health care. For men, it is professional, scientific, and technical services, construction, and accommodation and food services. The average commute to work is about 28 minutes. More than 34.6% of Atlanta residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 13.8%, is higher than the state average.

The unemployment rate in Atlanta is 11.1%, which is greater than Georgia's average of 10.1%.

The percentage of Atlanta residents that are affiliated with a religious congregation, 58.7%, is more than both the national and state average. Aarons Tabernacle Church, Welcome Home Baptist Church and Adair Park Church are some of the churches located in Atlanta. The largest religious groups are the Southern Baptist Convention, the United Methodist Church and the Catholic Church.

Atlanta is home to the Martin Luther King Junior Community Center and the Diuid Hills Golf Club as well as Alexander Park and Wesley Avenue Park. Shopping malls in the area include Rio Mall Shopping Center, Collier Heights Plaza Shopping Center and Northside Parkway Shopping Center. Visitors to Atlanta can choose from Country Inn-Stes Atl Dwntwn S, Comfort Inn and Comfort Inn Buckhead North for temporary stays in the area.