Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Architectural Drafters in Atlanta, Georgia

There is a wide variety of career and education opportunities for architectural drafters in the Atlanta, Georgia area. There are currently 2,230 jobs for architectural drafters in Georgia and this is projected to shrink by 1% to about 2,200 jobs by 2016. This is not quite as good as the national trend for architectural drafters, which sees this job pool growing by about 9.1% over the next eight years. In general, architectural drafters prepare detailed drawings of architectural designs and plans for buildings and structures according to specifications provided by architect.

Architectural drafters earn approximately $19 per hour or $40,950 annually on average in Georgia. Nationally they average about $21 per hour or $44,490 yearly. Earnings for architectural drafters are not quite as good as earnings in the general category of Drafting in Georgia and not quite as good as general Drafting category earnings nationally. Jobs in this field include: architectural designer, architecture drafter, and plumbing designer.

The Atlanta area is home to ninety-one schools of higher education, including twelve within twenty-five miles of Atlanta where you can get a degree as an architectural drafter. Architectural drafters usually hold an Associate's, or other 2-year degree, so you can expect to spend about two years training to become an architectural drafter if you already have a high school diploma.

CAREER DESCRIPTION: Architectural Drafter

In general, architectural drafters prepare detailed drawings of architectural designs and plans for buildings and structures according to specifications provided by architect.

Architectural drafters operate computer-aided drafting (CAD) equipment or conventional drafting stations to produce designs, working drawings, charts, forms and records. They also obtain and assemble data to finish architectural designs, visiting job sites to compile measurements as needed. Equally important, architectural drafters have to analyze building codes, by-laws, space and site requirements, and other technical documents and reports to establish their effect on architectural designs. They are often called upon to direct structural, electrical and mechanical designs and decide on a method of presentation to graphically represent building plans. Finally, architectural drafters draw rough and detailed scale plans for foundations, buildings and structures, on the basis of preliminary concepts, sketches, engineering calculations, specification sheets and other data.

Every day, architectural drafters are expected to be able to visualize how things come together and can be organized. They need to think through problems and come up with general rules. It is also important that they see details at a very fine level of focus.

It is important for architectural drafters to lay out and plan interior room arrangements for commercial buildings using computer-assisted drafting (CAD) equipment and software. They are often called upon to develop freehand drawings and lettering to accompany drawings. They also check dimensions of materials to be used and assign numbers to records of materials. They are sometimes expected to ready colored drawings of landscape and interior designs for presentation to client. Somewhat less frequently, architectural drafters are also expected to represent architect on construction site, ensuring builder adherence to layout specifications and advising on layout corrections, under architect's supervision.

They also have to be able to build landscape, architectural and display models And finally, they sometimes have to ready cost estimates, contracts, bidding documents and technical summaries for specific projects under an architect's supervision.

Like many other jobs, architectural drafters must be thorough and dependable and be reliable.

Similar jobs with educational opportunities in Atlanta include:

  • CAD/CAM Specialist. Prepare detailed working diagrams of machinery and mechanical devices, including dimensions, and other engineering information.
  • Civil Draftsman. Prepare drawings and topographical and relief maps used in civil engineering projects, such as highways, bridges, pipelines, flood control projects, and water and sewerage control systems.
  • Civil Engineering Technician. Apply theory and principles of civil engineering in planning, designing, and overseeing construction and maintenance of structures and facilities under the direction of engineering staff or physical scientists.
  • Equipment Engineering Technician. Apply electrical theory and related knowledge to test and modify developmental or operational electrical machinery and electrical control equipment and circuitry in industrial or commercial plants and laboratories. Usually work under direction of engineering staff.
  • Mechanical Engineer. Perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment. Oversee installation, operation, and repair of such equipment as centralized heat, gas, and steam systems.

EDUCATIONAL OPPORTUNITIES: Architectural Drafter Training

ITT Technical Institute-Atlanta - Atlanta, GA

ITT Technical Institute-Atlanta, 1745 Phoenix Blvd., Suite 100, Atlanta, GA 30349. ITT Technical Institute-Atlanta is a small school located in Atlanta, Georgia. It is a private for-profit school with primarily 4-year or above programs. It has 304 students and an admission rate of 39%. ITT Technical Institute-Atlanta has an associate's degree program in CAD/CADD Drafting and/or Design Technology/Technician.

ITT Technical Institute-Duluth - Duluth, GA

ITT Technical Institute-Duluth, 10700 Abbotts Bridge Rd-Ste 190, Duluth, GA 30097. ITT Technical Institute-Duluth is a small school located in Duluth, Georgia. It is a private for-profit school with primarily 4-year or above programs. It has 573 students and an admission rate of 36%. ITT Technical Institute-Duluth has an associate's degree program in CAD/CADD Drafting and/or Design Technology/Technician which graduated sixteen students in 2008.

Chattahoochee Technical College - Marietta, GA

Chattahoochee Technical College, 980 S Cobb Drive Dr SE, Marietta, GA 30060-3300. Chattahoochee Technical College is a medium sized college located in Marietta, Georgia. It is a public school with primarily 2-year programs and has 5,616 students. Chattahoochee Technical College has 2 areas of study related to Architectural Drafter. They are:

  • Drafting and Design Technology/Technician, less than one year, one to two year, and associate's degree which graduated forty-seven, sixteen, and sixteen students respectively in 2008.
  • Architectural Drafting and Architectural CAD/CADD, less than one year which graduated 28 students in 2008.

Gwinnett Technical College - Lawrenceville, GA

Gwinnett Technical College, 5150 Sugarloaf Parkway, Lawrenceville, GA 30043-5702. Gwinnett Technical College is a medium sized college located in Lawrenceville, Georgia. It is a public school with primarily 2-year programs and has 5,299 students. Gwinnett Technical College has 2 areas of study related to Architectural Drafter. They are:

  • Drafting and Design Technology/Technician, less than one year, one to two year, and associate's degree which graduated twenty-six, two, and six students respectively in 2008.
  • CAD/CADD Drafting and/or Design Technology/Technician, less than one year which graduated 49 students in 2008.

Clayton State University - Morrow, GA

Clayton State University, 2000 Clayton State Boulevard, Morrow, GA 30260-0285. Clayton State University is a medium sized university located in Morrow, Georgia. It is a public school with primarily 4-year or above programs. It has 6,056 students and an admission rate of 46%. Clayton State University has 2 areas of study related to Architectural Drafter. They are:

  • Drafting and Design Technology/Technician, less than one year which graduated 2 students in 2008.
  • Architectural Drafting and Architectural CAD/CADD, associate's degree which graduated 4 students in 2008.

Griffin Technical College - Griffin, GA

Griffin Technical College, 501 Varsity Rd, Griffin, GA 30223-2042. Griffin Technical College is a small college located in Griffin, Georgia. It is a public school with primarily 2-year programs and has 4,162 students. Griffin Technical College has 2 areas of study related to Architectural Drafter. They are:

  • Drafting and Design Technology/Technician, associate's degree which graduated 5 students in 2008.
  • CAD/CADD Drafting and/or Design Technology/Technician, less than one year which graduated 2 students in 2008.

Lanier Technical College - Oakwood, GA

Lanier Technical College, 2990 Landrum Education Dr, Oakwood, GA 30566. Lanier Technical College is a small college located in Oakwood, Georgia. It is a public school with primarily 2-year programs and has 3,168 students. Lanier Technical College has 3 areas of study related to Architectural Drafter. They are:

  • Drafting and Design Technology/Technician, less than one year, one to two year, and associate's degree which graduated sixteen, ten, and three students respectively in 2008.
  • CAD/CADD Drafting and/or Design Technology/Technician, less than one year which graduated 6 students in 2008.
  • Architectural Drafting and Architectural CAD/CADD, less than one year which graduated 10 students in 2008.

Atlanta Metropolitan College - Atlanta, GA

Atlanta Metropolitan College, 1630 Metropolitan Parkway, SW, Atlanta, GA 30310-4498. Atlanta Metropolitan College is a small college located in Atlanta, Georgia. It is a public school with primarily 2-year programs. It has 2,162 students and an admission rate of 42%. Atlanta Metropolitan College has an associate's degree program in Drafting and Design Technology/Technician which graduated one student in 2008.

Atlanta Technical College - Atlanta, GA

Atlanta Technical College, 1560 Metropolitan Pky SW, Atlanta, GA 30310-4446. Atlanta Technical College is a small college located in Atlanta, Georgia. It is a public school with primarily 2-year programs and has 3,293 students. Atlanta Technical College has 3 areas of study related to Architectural Drafter. They are:

  • Drafting and Design Technology/Technician, one to two year which graduated 2 students in 2008.
  • CAD/CADD Drafting and/or Design Technology/Technician, less than one year which graduated 3 students in 2008.
  • Architectural Drafting and Architectural CAD/CADD, less than one year which graduated 4 students in 2008.

ITT Technical Institute-Kennesaw - Kennesaw, GA

ITT Technical Institute-Kennesaw, 1000 Cobb Place Blvd NW - Bldg 300 - Ste 300, Kennesaw, GA 30144. ITT Technical Institute-Kennesaw is a small school located in Kennesaw, Georgia. It is a private for-profit school with primarily 4-year or above programs. It has 432 students and an admission rate of 36%. ITT Technical Institute-Kennesaw has an associate's degree program in CAD/CADD Drafting and/or Design Technology/Technician which graduated eleven students in 2008.

Gainesville State College - Oakwood, GA

Gainesville State College, 3820 Mundy Mill Rd, Oakwood, GA 30566. Gainesville State College is a medium sized college located in Oakwood, Georgia. It is a public school with primarily 4-year or above programs. It has 8,060 students and an admission rate of 98%. Gainesville State College has an associate's degree program in Drafting and Design Technology/Technician which graduated two students in 2008.

Dekalb Technical College - Clarkston, GA

Dekalb Technical College, 495 N Indian Creek Dr, Clarkston, GA 30021-2397. Dekalb Technical College is a small college located in Clarkston, Georgia. It is a public school with primarily 2-year programs and has 3,939 students. Dekalb Technical College has 2 areas of study related to Architectural Drafter. They are:

  • Drafting and Design Technology/Technician, less than one year, one to two year, and associate's degree which graduated thirteen, three, and five students respectively in 2008.
  • Architectural Drafting and Architectural CAD/CADD, less than one year which graduated 2 students in 2008.

CERTIFICATIONS

Planning and Scheduling Professional: The PSP certification is to recognize specialists who meet a demanding set of planning and scheduling criteria by a rigorous examination, experience, education and ethical qualificaion.

For more information, see the AACE International (Association for the Advancement of Cost Engineering through total cost management) website.

Certified Transfer Station Technical Associate: This certification was developed to address the increased interest in transfer stations and provide transfer station managers and others the opportunity to learn more about transfer station design and operation.

For more information, see the Solid Waste Association of North America website.

LOCATION INFORMATION: Atlanta, Georgia

Atlanta, Georgia
Atlanta, Georgia photo by Evilarry

Atlanta is located in Fulton County, Georgia. It has a population of over 537,958, which has grown by 29.2% over the last ten years. The cost of living index in Atlanta, 94, is below the national average. New single-family homes in Atlanta cost $173,200 on average, which is well above the state average. In 2008, five hundred two new homes were constructed in Atlanta, down from 1,247 the previous year.

The three most popular industries for women in Atlanta are educational services, professional, scientific, and technical services, and health care. For men, it is professional, scientific, and technical services, construction, and accommodation and food services. The average commute to work is about 28 minutes. More than 34.6% of Atlanta residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 13.8%, is higher than the state average.

The unemployment rate in Atlanta is 11.1%, which is greater than Georgia's average of 10.1%.

The percentage of Atlanta residents that are affiliated with a religious congregation, 58.7%, is more than both the national and state average. Aarons Tabernacle Church, Welcome Home Baptist Church and Adair Park Church are some of the churches located in Atlanta. The largest religious groups are the Southern Baptist Convention, the United Methodist Church and the Catholic Church.

Atlanta is home to the Martin Luther King Junior Community Center and the Diuid Hills Golf Club as well as Alexander Park and Wesley Avenue Park. Shopping malls in the area include Rio Mall Shopping Center, Collier Heights Plaza Shopping Center and Northside Parkway Shopping Center. Visitors to Atlanta can choose from Country Inn-Stes Atl Dwntwn S, Comfort Inn and Comfort Inn Buckhead North for temporary stays in the area.