Career and Education Opportunities for Mechanical Engineers in Tampa, Florida
Mechanical engineers can find both educational opportunities and jobs in the Tampa, Florida area. There are currently 6,190 working mechanical engineers in Florida; this should grow 20% to 7,430 working mechanical engineers in the state by 2016. This is better than the nation as a whole, where employment opportunities for mechanical engineers are expected to grow by about 6.0%. In general, mechanical engineers perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment.
Mechanical engineers earn approximately $33 hourly or $70,100 yearly on average in Florida. Nationally they average about $36 hourly or $74,920 yearly. Incomes for mechanical engineers are not quite as good as in the overall category of Engineering in Florida, and not quite as good as the overall Engineering category nationally. People working as mechanical engineers can fill a number of jobs, such as: brake engineer, mechanical development engineer, and design maintenance engineer.
There is one school within twenty-five miles of Tampa where you can study to be a mechanical engineer, among fifty-four schools of higher education total in the Tampa area. Given that the most common education level for mechanical engineers is a Bachelor's degree, it will take about four years to learn to be a mechanical engineer if you already have a high school diploma.
CAREER DESCRIPTION: Mechanical Engineer
In general, mechanical engineers perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment. They also oversee installation, operation, and repair of such equipment as centralized heat, gas, and steam systems.
Mechanical engineers read and interpret blueprints, technical drawings and computer-generated reports. They also design and test models of alternate designs and processing methods to gauge feasibility, operating condition effects, possible new applications and necessity of modification. Equally important, mechanical engineers have to conduct research that tests and analyzes the feasibility, layout, operation and effectiveness of equipment, components and systems. Finally, mechanical engineers specify system components or direct modification of products to insure conformance with engineering layout and performance specifications.
Every day, mechanical engineers are expected to be able to think through problems and come up with general rules. They need to listen to and understand others in meetings. It is also important that they read and understand documents and reports.
It is important for mechanical engineers to talk with engineers and other personnel to execute operating procedures, resolve system malfunctions, and furnish technical data. They are often called upon to recommend layout modifications to remove machine or system malfunctions. They also research and maintain mechanical products, equipment, systems and processes to fit requirements, applying knowledge of engineering principles. They are sometimes expected to assist drafters in developing the structural layout of products using drafting tools or computer-assisted layout (CAD) or drafting equipment and software. Somewhat less frequently, mechanical engineers are also expected to estimate costs and submit bids for engineering or extraction projects, and ready contract documents.
Mechanical engineers sometimes are asked to layout test control apparatus and equipment and develop processes for testing products. They also have to be able to research and analyze customer layout proposals and other data to review the feasibility and maintenance requirements of designs or applications and solicit new business and furnish technical customer service. And finally, they sometimes have to solicit new business and furnish technical customer service.
Like many other jobs, mechanical engineers must be thorough and dependable and be able to absorb the factors involved and a problem and provide a well thought out solution.
Similar jobs with educational opportunities in Tampa include:
- Architect. Plan and design structures, such as private residences, office buildings, and other structural property.
- Architectural Drafter. Prepare detailed drawings of architectural designs and plans for buildings and structures according to specifications provided by architect.
- Biomedical Engineer. Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
- Chemical Engineer. Design chemical plant equipment and devise processes for manufacturing chemicals and products, such as gasoline, synthetic rubber, and pulp, by applying principles and technology of chemistry, physics, and engineering.
- Civil Draftsman. Prepare drawings and topographical and relief maps used in civil engineering projects, such as highways, bridges, pipelines, flood control projects, and water and sewerage control systems.
- Civil Engineer. Perform engineering duties in planning, designing, and overseeing construction and maintenance of building structures, and facilities, such as roads, railroads, airports, bridges, harbors, channels, dams, irrigation projects, pipelines, power plants, water and sewage systems, and waste disposal units. Includes architectural, structural, and geo-technical engineers.
- Civil Engineering Technician. Apply theory and principles of civil engineering in planning, designing, and overseeing construction and maintenance of structures and facilities under the direction of engineering staff or physical scientists.
- Computer Engineer. Research, design, and test computer or computer-related equipment for commercial, industrial, or scientific use. May supervise the manufacturing and installation of computer or computer-related equipment and components.
- Electrical Engineer. Design, develop, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, or scientific use.
- Electronics Engineer. Research, design, and test electronic components and systems for commercial, industrial, or scientific use utilizing knowledge of electronic theory and materials properties. Design electronic circuits and components for use in fields such as telecommunications, aerospace guidance and propulsion control, acoustics, or instruments and controls.
- Electronics Engineering Technician. Lay out, build, and modify developmental and production electronic components, parts, and systems, such as computer equipment, missile control instrumentation, electron tubes, and machine tool numerical controls, applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. Usually work under direction of engineering staff.
- Equipment Engineering Technician. Apply electrical theory and related knowledge to test and modify developmental or operational electrical machinery and electrical control equipment and circuitry in industrial or commercial plants and laboratories. Usually work under direction of engineering staff.
- Fire Prevention Research Engineer. Research causes of fires, determine fire protection methods, and design or recommend materials or equipment such as structural components or fire-detection equipment to assist organizations in safeguarding life and property against fire, explosion, and related hazards.
- Health, Safety, and Environment Manager. Plan, implement, and coordinate safety programs, requiring application of engineering principles and technology, to prevent or correct unsafe environmental working conditions.
- Industrial Engineer. Design, develop, and evaluate integrated systems for managing industrial production processes including human work factors, quality control, inventory control, logistics and material flow, cost analysis, and production coordination.
- Manufacturing Engineer. Apply knowledge of materials and engineering theory and methods to design, integrate, and improve manufacturing systems or related processes. May work with commercial or industrial designers to refine product designs to increase producibility and decrease costs.
- Product Safety Engineer. Develop and conduct tests to evaluate product safety levels and recommend measures to reduce or eliminate hazards.
EDUCATIONAL OPPORTUNITIES: Mechanical Engineer Training
University of South Florida - Tampa, FL
University of South Florida, 4202 East Fowler Ave, Tampa, FL 33620-9951. University of South Florida is a large university located in Tampa, Florida. It is a public school with primarily 4-year or above programs. It has 46,174 students and an admission rate of 46%. University of South Florida has bachelor's degree, master's degree, and doctor's degree programs in Mechanical Engineering which graduated 100, eighteen, and four students respectively in 2008.
Planning and Scheduling Professional: The PSP certification is to recognize specialists who meet a demanding set of planning and scheduling criteria by a rigorous examination, experience, education and ethical qualificaion.
For more information, see the AACE International (Association for the Advancement of Cost Engineering through total cost management) website.
Geometric Dimensioning & Tolerancing Professional - Technologist: ASME GDTP Certification provides the means to recognize proficiency in the understanding and application of the geometric dimensioning and tolerancing (GD&T) principles expressed in the ASME Y14.
For more information, see the American Society of Mechanical Engineers International website.
Certified in Plumbing Design: The Certified in Plumbing Design (CPD) program is an international certification program for engineers and designers of plumbing systems.
For more information, see the American Society of Plumbing Engineers website.
Certified Associate in Materials Handling: MHMS is proud to offer a professional certification program for its members.
For more information, see the Materials Handling and Management Society website.
PV Installer Certification: The target candidate for NABCEP certification is the person responsible for the system installation (e.
For more information, see the North American Board of Certified Energy Practitioners website.
LOCATION INFORMATION: Tampa, Florida
Tampa is located in Hillsborough County, Florida. It has a population of over 340,882, which has grown by 12.3% over the last ten years. The cost of living index in Tampa, 95, is near the national average. New single-family homes in Tampa are valued at $188,700 on average, which is far less than the state average. In 2008, six hundred thirty-five new homes were constructed in Tampa, down from 1,008 the previous year.
The three big industries for women in Tampa are health care, educational services, and finance and insurance. For men, it is construction, professional, scientific, and technical services, and accommodation and food services. The average travel time to work is about 23 minutes. More than 25.4% of Tampa residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 9.2%, is higher than the state average.
The unemployment rate in Tampa is 11.8%, which is greater than Florida's average of 11.3%.
The percentage of Tampa residents that are affiliated with a religious congregation, 41.8%, is less than the national average but more than the state average. Abundant Life Assembly of God Church, Florida Tampa Mission and Most Holy Redeemer Church are among the churches located in Tampa. The largest religious groups are the Catholic Church, the Southern Baptist Convention and the United Methodist Church.
Tampa is home to the Parkers Railroad Station and the Drew Station Railroad Station as well as Ybor City Museum State Park and American Legion Playground. Shopping centers in the area include Northgate Shopping Center, Old Hyde Park Village Shopping Center and Benttree Plaza Shopping Center. Visitors to Tampa can choose from Backstage Restaurant & Lounge, Baymont Tampa Busch Gardens and Budget Inn for temporary stays in the area.