Career and Education Opportunities for Welders in Tallahassee, Florida
There is a wide variety of career and education opportunities for welders in the Tallahassee, Florida area. There are currently 13,890 jobs for welders in Florida and this is projected to grow by 17% to 16,240 jobs by 2016. This is better than the national trend for welders, which sees this job pool shrinking by about 1.6% over the next eight years. Welders generally use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders earn approximately $15 hourly or $33,230 annually on average in Florida. Nationally they average about $16 per hour or $33,560 per year. Compared with people working in the overall category of Foundry and Metal Work, people working as welders in Florida earn more. They earn more than people working in the overall category of Foundry and Metal Work nationally.
There are two schools within twenty-five miles of Tallahassee where you can study to be a welder, among nine schools of higher education total in the Tallahassee area. Welders usually hold less than a high school diploma, so you can expect to spend only a short time training to become a welder if you already have a high school diploma.
CAREER DESCRIPTION: Welder
In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders bolt components to set required configurations and positions for welding. They also remove rough spots from workpieces, using portable grinders or scrapers. Equally important, welders have to chip or grind off excess weld or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. They are often called upon to weld components in flat or overhead positions. They are expected to operate safety equipment and use safe work habits. Finally, welders recognize and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Every day, welders are expected to be able to control objects and devices with precise control. They need to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for welders to ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. They are often called upon to examine workpieces for defects and measure workpieces with straightedges or templates to insure conformance with specifications. They also ready all material surfaces to be welded, ensuring that there is no loose or thick scale, slag or other foreign matter. They are sometimes expected to monitor the fitting and welding processes to avoid overheating of components or warping or expansion of material. Somewhat less frequently, welders are also expected to operate manual or semi-automatic welding apparatus to fuse metal segments.
Welders sometimes are asked to operate metal shaping and bending machines, such as brakes and shears. And finally, they sometimes have to decide on and install torches, torch tips and flux, in line with welding chart specifications or types and thicknesses of metals.
Like many other jobs, welders must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Tallahassee include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Machinist. Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, shop mathematics, and machining procedures.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Structural and Ornamental Metalwork Metal Fabricator. Fabricate, lay out, and fit parts of structural metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Welder Training
Lively Technical Center - Tallahassee, FL
Lively Technical Center, 500 N Appleyard Dr, Tallahassee, FL 32304-2895. Lively Technical Center is a small school located in Tallahassee, Florida. It is a public school with primarily 2-year programs and has 548 students. Lively Technical Center has a one to two year program in Welding Technology/Welder which graduated two students in 2008.
Southwest Georgia Technical College - Thomasville, GA
Southwest Georgia Technical College, 15689 US Hwy 19 N, Thomasville, GA 31792. Southwest Georgia Technical College is a small college located in Thomasville, Georgia. It is a public school with primarily 2-year programs and has 1,512 students. Southwest Georgia Technical College has a less than one year and a one to two year program in Welding Technology/Welder which graduated eighty-six and one students respectively in 2008.
Radiographic Interpreter: The program, based upon requirements contained within AWS B5.
For more information, see the American Welding Society website.
Certified Robotic Arc Welding: The Certification Program for Robotic Arc Welding - Operators and Technicians (CRAW) allows many welding personnel employed in various welding sectors to measure themselves against standards for their occupation.
For more information, see the American Welding Society website.
LOCATION INFORMATION: Tallahassee, Florida
Tallahassee is located in Leon County, Florida. It has a population of over 171,922, which has grown by 14.1% over the last ten years. The cost of living index in Tallahassee, 89, is well below the national average. New single-family homes in Tallahassee are priced at $166,600 on average, which is far less than the state average. In 2008, three hundred new homes were built in Tallahassee, down from six hundred thirty-eight the previous year.
The three big industries for women in Tallahassee are educational services, public administration, and health care. For men, it is public administration, educational services, and accommodation and food services. The average commute to work is about 19 minutes. More than 45.0% of Tallahassee residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 19.8%, is higher than the state average.
The unemployment rate in Tallahassee is 7.1%, which is less than Florida's average of 11.3%.
The percentage of Tallahassee residents that are affiliated with a religious congregation, 37.6%, is less than both the national and state average. Abundant Life Foursquare Church, Advent Episcopal Church and Aftermath Church are among the churches located in Tallahassee. The most common religious groups are the Southern Baptist Convention, the Catholic Church and the United Methodist Church.
Tallahassee is home to the Miracle Plaza and the Tallahassee Community College Library as well as Old Fort Park and Alfred B Maclay Gardens State Park. Shopping malls in the area include Northwood Mall, Parkway Shopping Center and Tallahassee Mall. Visitors to Tallahassee can choose from Cactus Motel, Best Western Pride Inn Suites and Budget Inn for temporary stays in the area.