Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Numerical Control Tool Programmers in Pembroke Pines, Florida

Numerical control tool programmers can find both educational opportunities and jobs in the Pembroke Pines, Florida area. There are currently 270 working numerical control tool programmers in Florida; this should grow 11% to 300 working numerical control tool programmers in the state by 2016. This is better than the national trend for numerical control tool programmers, which sees this job pool shrinking by about 15.4% over the next eight years. Numerical control tool programmers generally develop programs to control machining or processing of parts by automatic machine tools, equipment, or systems.

Numerical control tool programmers earn about $18 hourly or $38,040 per year on average in Florida and about $21 per hour or $44,310 per year on average nationally. Compared with people working in the overall category of Computer Controls, people working as numerical control tool programmers in Florida earn more. They earn more than people working in the overall category of Computer Controls nationally.

The Pembroke Pines area is home to ninety-seven schools of higher education, including six within twenty-five miles of Pembroke Pines where you can get a degree as a numerical control tool programmer. Numerical control tool programmers usually hold an Associate's, or other 2-year degree, so you can expect to spend about two years studying to be a numerical control tool programmer if you already have a high school diploma.

CAREER DESCRIPTION: Numerical Control Tool Programmer

Numerical Control Tool Programmer video from the State of New Jersey Dept. of Labor and Workforce Development

In general, numerical control tool programmers develop programs to control machining or processing of parts by automatic machine tools, equipment, or systems.

Numerical control tool programmers analyze job orders, drawings, blueprints, specifications, printed circuit board pattern films, and layout data so as to calculate dimensions and feed rates. They also decide on the sequence of machine operations, and decide on the proper cutting tools needed to machine workpieces into the desired shapes. Equally important, numerical control tool programmers have to modify existing programs to enhance efficiency. They are often called upon to decide on reference points, machine cutting paths, or hole locations, and compute angular and linear dimensions, radii, and curvatures. They are expected to observe machines on trial runs or conduct computer simulations to insure that programs and machinery will function properly and produce items that meet specifications. Finally, numerical control tool programmers revise programs and/or tapes to remove errors, and retest programs to check that problems have been solved.

Every day, numerical control tool programmers are expected to be able to visualize how things come together and can be organized. They need to see details at a very fine level of focus. It is also important that they imediately see the relationships between collections of numbers, images, and patterns.

It is important for numerical control tool programmers to enter computer commands to store or retrieve components patterns or programs that transfer data to other media. They are often called upon to ready geometric layouts from graphic displays, using computer-assisted drafting software or drafting instruments and graph paper. They also compare encoded tapes or computer printouts with original part specifications and blueprints to confirm precision of instructions. They are sometimes expected to enter coordinates of hole locations into program memories by depressing pedals or buttons of programmers. Somewhat less frequently, numerical control tool programmers are also expected to write instruction sheets and cutter lists for a machine's controller so as to guide setup and encode numerical control tapes.

Numerical control tool programmers sometimes are asked to draw machine tool paths on pattern film, using colored markers and following guidelines for tool speed and efficiency. and revise programs and/or tapes to remove errors, and retest programs to check that problems have been solved. And finally, they sometimes have to observe machines on trial runs or conduct computer simulations to insure that programs and machinery will function properly and produce items that meet specifications.

Like many other jobs, numerical control tool programmers must be thorough and dependable and be able to absorb the factors involved and a problem and provide a well thought out solution.

EDUCATIONAL OPPORTUNITIES: Numerical Control Tool Programmer Training

Keiser University-Ft. Lauderdale - Fort Lauderdale, FL

Keiser University-Ft. Lauderdale, 1500 NW 49th St., Fort Lauderdale, FL 33309. Keiser University-Ft. Lauderdale is a large university located in Fort Lauderdale, Florida. It is a private for-profit school with primarily 4-year or above programs. It has 11,305 students and an admission rate of 41%. Keiser University-Ft. Lauderdale has an associate's degree program in Computer Programming/Programmer which graduated four students in 2008.

Florida National College - Hialeah, FL

Florida National College, 4425 West 20 Avenue, Hialeah, FL 33012. Florida National College is a small college located in Hialeah, Florida. It is a private for-profit school with primarily 4-year or above programs and has 2,398 students. Florida National College has an associate's degree program in Computer Programming/Programmer which graduated seven students in 2008.

McFatter Technical Center - Davie, FL

McFatter Technical Center, 6500 Nova Drive, Davie, FL 33317. McFatter Technical Center is a small school located in Davie, Florida. It is a public school with primarily 2-year programs and has 1,039 students. McFatter Technical Center has a less than one year program in Computer Programming/Programmer which graduated six students in 2008.

The Art Institute of Fort Lauderdale Inc - Fort Lauderdale, FL

The Art Institute of Fort Lauderdale Inc, 1799 SE 17th St, Fort Lauderdale, FL 33316-3000. The Art Institute of Fort Lauderdale Inc is a small school located in Fort Lauderdale, Florida. It is a private for-profit school with primarily 4-year or above programs. It has 3,071 students and an admission rate of 52%. The Art Institute of Fort Lauderdale Inc has an associate's degree and a bachelor's degree program in Computer Programming/Programmer which graduated twenty-six and forty-nine students respectively in 2008.

AI Miami International University of Art and Design - Miami, FL

AI Miami International University of Art and Design, 1501 Biscayne Boulevard, Miami, FL 33132-1418. AI Miami International University of Art and Design is a small university located in Miami, Florida. It is a private for-profit school with primarily 4-year or above programs. It has 3,120 students and an admission rate of 41%. AI Miami International University of Art and Design has a bachelor's degree program in Computer Programming/Programmer which graduated twenty-seven students in 2008.

Miami Lakes Educational Center - Miami Lakes, FL

Miami Lakes Educational Center, 5780 NW 158th St, Miami Lakes, FL 33014. Miami Lakes Educational Center is a small school located in Miami Lakes, Florida. It is a public school with primarily 2-year programs and has 1,376 students. Miami Lakes Educational Center has a less than one year program in Computer Programming/Programmer.

LOCATION INFORMATION: Pembroke Pines, Florida

Pembroke Pines, Florida
Pembroke Pines, Florida photo by Dawn Ashley

Pembroke Pines is situated in Broward County, Florida. It has a population of over 145,661, which has grown by 6.0% in the past ten years. The cost of living index in Pembroke Pines, 116, is far greater than the national average. New single-family homes in Pembroke Pines are valued at $117,100 on average, which is far less than the state average. In 2008, five new homes were built in Pembroke Pines, up from three the previous year.

The three most popular industries for women in Pembroke Pines are health care, educational services, and finance and insurance. For men, it is public administration, construction, and professional, scientific, and technical services. The average commute to work is about 32 minutes. More than 28.7% of Pembroke Pines residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 10.0%, is higher than the state average.

The unemployment rate in Pembroke Pines is 8.6%, which is less than Florida's average of 11.3%.

The percentage of Pembroke Pines residents that are affiliated with a religious congregation, 45.9%, is less than the national average but more than the state average. Pembroke Road Baptist Church, Boulevard Chapel and Taft Street Chapel are all churches located in Pembroke Pines. The most common religious groups are the Catholic Church, the Southern Baptist Convention and the United Methodist Church.

Pembroke Pines is home to the Hollywood Lakes Country Club and the Pines Bank Plaza as well as Kennedy Park and Snake Creek Park. Shopping malls in the area include Pembroke Pines Shopping Center, Pembroke Village Shopping Center and University Mall.