Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Structural and Ornamental Metalwork Metal Fabricators in Pembroke Pines, Florida

Many educational and employment opportunities exist for structural and ornamental metalwork metal fabricators in the Pembroke Pines, Florida area. About 3,440 people are currently employed as structural and ornamental metalwork metal fabricators in Florida. By 2016, this is expected to grow by 11% to about 3,800 people employed. This is better than the national trend for structural and ornamental metalwork metal fabricators, which sees this job pool shrinking by about 0.4% over the next eight years. Structural and ornamental metalwork metal fabricators generally fabricate, lay out, and fit parts of structural metal products.

Structural and ornamental metalwork metal fabricators earn approximately $14 per hour or $30,330 yearly on average in Florida. Nationally they average about $15 hourly or $32,400 per year. Structural and ornamental metalwork metal fabricators earn more than people working in the category of Assembling and Fabrication generally in Florida and more than people in the Assembling and Fabrication category nationally.

There is one school within twenty-five miles of Pembroke Pines where you can study to be a structural and ornamental metalwork metal fabricator, among ninety-seven schools of higher education total in the Pembroke Pines area. Structural and ornamental metalwork metal fabricators usually hold a high school diploma or GED, so it will take only a short time to learn to be a structural and ornamental metalwork metal fabricator if you already have a high school diploma.

CAREER DESCRIPTION: Structural and Ornamental Metalwork Metal Fabricator

Structural and Ornamental Metalwork Metal Fabricator video from the State of New Jersey Dept. of Labor and Workforce Development

In general, structural and ornamental metalwork metal fabricators fabricate, lay out, and fit parts of structural metal products.

Structural and ornamental metalwork metal fabricators position and weld components to fashion complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools. They also move components into position, manually or with hoists or cranes. Equally important, structural and ornamental metalwork metal fabricators have to lay out and examine metal stock or workpieces to be processed to insure that specifications are met. They are often called upon to verify conformance of workpieces to given requirements, using squares, rulers, and measuring tapes. They are expected to tack-weld fitted components together. Finally, structural and ornamental metalwork metal fabricators smooth workpiece edges and fix taps, tubes, and valves.

Every day, structural and ornamental metalwork metal fabricators are expected to be able to visualize how things come together and can be organized. They need to see details at a very fine level of focus. It is also important that they maintain precise control of objects and devices through a range of movements.

It is important for structural and ornamental metalwork metal fabricators to straighten warped or bent components, using sledges or bulldozers. They are often called upon to direct welders to build up low spots or short pieces with weld. They also align and fit components according to given requirements, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers. They are sometimes expected to layout and construct templates and fixtures, using hand tools. Somewhat less frequently, structural and ornamental metalwork metal fabricators are also expected to heat-treat components, using acetylene torches.

Structural and ornamental metalwork metal fabricators sometimes are asked to hammer and grind workpieces to cut and straighten metal. And finally, they sometimes have to verify conformance of workpieces to given requirements, using squares, rulers, and measuring tapes.

Like many other jobs, structural and ornamental metalwork metal fabricators must be thorough and dependable and be reliable.

Similar jobs with educational opportunities in Pembroke Pines include:

  • Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
  • Electrical and Electronic Equipment Assembler. Assemble or modify electrical or electronic equipment, such as computers, test equipment telemetering systems, electric motors, and batteries.
  • Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

EDUCATIONAL OPPORTUNITIES: Structural and Ornamental Metalwork Metal Fabricator Training

Palm Beach Community College - Lake Worth, FL

Palm Beach Community College, 4200 Congress Ave, Lake Worth, FL 33461-4796. Palm Beach Community College is a large college located in Lake Worth, Florida. It is a public school with primarily 2-year programs and has 25,122 students. Palm Beach Community College has a one to two year program in Machine Shop Technology/Assistant which graduated four students in 2008.

LOCATION INFORMATION: Pembroke Pines, Florida

Pembroke Pines, Florida
Pembroke Pines, Florida photo by Dawn Ashley

Pembroke Pines is situated in Broward County, Florida. It has a population of over 145,661, which has grown by 6.0% in the past ten years. The cost of living index in Pembroke Pines, 116, is far greater than the national average. New single-family homes in Pembroke Pines are valued at $117,100 on average, which is far less than the state average. In 2008, five new homes were built in Pembroke Pines, up from three the previous year.

The three most popular industries for women in Pembroke Pines are health care, educational services, and finance and insurance. For men, it is public administration, construction, and professional, scientific, and technical services. The average commute to work is about 32 minutes. More than 28.7% of Pembroke Pines residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 10.0%, is higher than the state average.

The unemployment rate in Pembroke Pines is 8.6%, which is less than Florida's average of 11.3%.

The percentage of Pembroke Pines residents that are affiliated with a religious congregation, 45.9%, is less than the national average but more than the state average. Pembroke Road Baptist Church, Boulevard Chapel and Taft Street Chapel are all churches located in Pembroke Pines. The most common religious groups are the Catholic Church, the Southern Baptist Convention and the United Methodist Church.

Pembroke Pines is home to the Hollywood Lakes Country Club and the Pines Bank Plaza as well as Kennedy Park and Snake Creek Park. Shopping malls in the area include Pembroke Pines Shopping Center, Pembroke Village Shopping Center and University Mall.