Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Sheet Metal Workers in Pembroke Pines, Florida

Sheet metal workers can find many career and educational opportunities in the Pembroke Pines, Florida area. About 8,710 people are currently employed as sheet metal workers in Florida. By 2016, this is expected to grow by 19% to about 10,340 people employed. This is better than the nation as a whole, where employment opportunities for sheet metal workers are expected to grow by about 6.5%. In general, sheet metal workers fabricate, assemble, and repair sheet metal products and equipment, such as ducts, control boxes, and furnace casings.

The income of a sheet metal worker is about $16 hourly or $35,170 yearly on average in Florida. In the U.S. as a whole, their income is about $19 hourly or $40,290 per year on average. Incomes for sheet metal workers are not quite as good as in the overall category of Metal Working and Welding in Florida, and not quite as good as the overall Metal Working and Welding category nationally.

There are ninety-seven schools of higher education in the Pembroke Pines area, including two within twenty-five miles of Pembroke Pines where you can get a degree to start your career as a sheet metal worker. The most common level of education for sheet metal workers is a high school diploma or GED. You can expect to spend only a short time training to become a sheet metal worker if you already have a high school diploma.

CAREER DESCRIPTION: Sheet Metal Worker

Sheet Metal Worker video from the State of New Jersey Dept. of Labor and Workforce Development

In general, sheet metal workers fabricate, assemble, and repair sheet metal products and equipment, such as ducts, control boxes, and furnace casings. They also work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; inspecting, assembling, and smoothing seams and joints of burred surfaces.

Sheet metal workers drill and punch holes in metal for screws, bolts, and rivets. They also lay out and mark dimensions and reference lines on material, such as roofing panels, in line with drawings or templates, using calculators, scribes, dividers, squares, and rulers. Equally important, sheet metal workers have to fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items. They are often called upon to decide on project requirements and required methods and materials, in line with blueprints and written or verbal instructions. They are expected to set up assemblies, such as flashing, pipes, tubes, heating and air conditioning ducts and down spouts, in supportive frameworks. Finally, sheet metal workers fabricate or alter parts at construction sites, using shears, hammers, punches, and drills.

Every day, sheet metal workers are expected to be able to visualize how things come together and can be organized. They need to see details at a very fine level of focus. It is also important that they prioritize information for further consideration.

It is important for sheet metal workers to maneuver completed units into position for installation, and anchor the units. They are often called upon to shape metal material over anvils or other forms, using hand tools. They also finish parts, using hacksaws, and hand, rotary, or squaring shears. They are sometimes expected to transport prefabricated parts to construction sites for assembly and installation. Somewhat less frequently, sheet metal workers are also expected to lay out and mark dimensions and reference lines on material, such as roofing panels, in line with drawings or templates, using calculators, scribes, dividers, squares, and rulers.

Sheet metal workers sometimes are asked to convert blueprints into shop drawings to be followed in the construction and assembly of sheet metal products. They also have to be able to fasten roof panel edges and machine-made molding to structures, nailing or welding pieces into position And finally, they sometimes have to fabricate or alter parts at construction sites, using shears, hammers, punches, and drills.

Like many other jobs, sheet metal workers must be reliable and be thorough and dependable.

Similar jobs with educational opportunities in Pembroke Pines include:

  • Steel Worker. Raise, place, and unite iron or steel girders, columns, and other structural members to form completed structures or structural frameworks. May erect metal storage tanks and assemble prefabricated metal buildings.

EDUCATIONAL OPPORTUNITIES: Sheet Metal Worker Training

Miami Dade College - Miami, FL

Miami Dade College, 300 NE 2nd Ave., Miami, FL 33132-2297. Miami Dade College is a large college located in Miami, Florida. It is a public school with primarily 4-year or above programs and has 57,106 students. Miami Dade College has a two to four year program in Sheet Metal Technology/Sheetworking.

Palm Beach Community College - Lake Worth, FL

Palm Beach Community College, 4200 Congress Ave, Lake Worth, FL 33461-4796. Palm Beach Community College is a large college located in Lake Worth, Florida. It is a public school with primarily 2-year programs and has 25,122 students. Palm Beach Community College has a two to four year program in Sheet Metal Technology/Sheetworking.

LICENSES

Certified Sheet Metal Contractor

Licensing agency: Fl. Dept. of Business and Professional Regulation
Address: 1940 N Monroe Street, Ste 300, Tallahassee, FL 32399

Phone: None
Website: Fl. Dept. of Business and Professional Regulation

Registered Sheet Metal Contractor

Licensing agency: Fl. Dept. of Business and Professional Regulation
Address: 1940 N Monroe Street, Ste 300, Tallahassee, FL 32399

Phone: None
Website: Fl. Dept. of Business and Professional Regulation

LOCATION INFORMATION: Pembroke Pines, Florida

Pembroke Pines, Florida
Pembroke Pines, Florida photo by Dawn Ashley

Pembroke Pines is situated in Broward County, Florida. It has a population of over 145,661, which has grown by 6.0% in the past ten years. The cost of living index in Pembroke Pines, 116, is far greater than the national average. New single-family homes in Pembroke Pines are valued at $117,100 on average, which is far less than the state average. In 2008, five new homes were built in Pembroke Pines, up from three the previous year.

The three most popular industries for women in Pembroke Pines are health care, educational services, and finance and insurance. For men, it is public administration, construction, and professional, scientific, and technical services. The average commute to work is about 32 minutes. More than 28.7% of Pembroke Pines residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 10.0%, is higher than the state average.

The unemployment rate in Pembroke Pines is 8.6%, which is less than Florida's average of 11.3%.

The percentage of Pembroke Pines residents that are affiliated with a religious congregation, 45.9%, is less than the national average but more than the state average. Pembroke Road Baptist Church, Boulevard Chapel and Taft Street Chapel are all churches located in Pembroke Pines. The most common religious groups are the Catholic Church, the Southern Baptist Convention and the United Methodist Church.

Pembroke Pines is home to the Hollywood Lakes Country Club and the Pines Bank Plaza as well as Kennedy Park and Snake Creek Park. Shopping malls in the area include Pembroke Pines Shopping Center, Pembroke Village Shopping Center and University Mall.