Career and Education Opportunities for Welders in Palm Bay, Florida
Welder career and educational opportunities abound in Palm Bay, Florida. There are currently 13,890 working welders in Florida; this should grow by 17% to 16,240 working welders in the state by 2016. This is better than the nation as a whole, where employment opportunities for welders are expected to shrink by about 1.6%. Welders generally use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders earn approximately $15 per hour or $33,230 per year on average in Florida. Nationally they average about $16 per hour or $33,560 yearly. Incomes for welders are better than in the overall category of Foundry and Metal Work in Florida, and better than the overall Foundry and Metal Work category nationally.
There are five schools of higher education in the Palm Bay area, including one within twenty-five miles of Palm Bay where you can get a degree to start your career as a welder. Welders usually hold less than a high school diploma, so you can expect to spend only a short time studying to be a welder if you already have a high school diploma.
CAREER DESCRIPTION: Welder
In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders bolt components to set required configurations and positions for welding. They also remove rough spots from workpieces, using portable grinders or scrapers. Equally important, welders have to chip or grind off excess weld or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. They are often called upon to weld components in flat or overhead positions. They are expected to operate safety equipment and use safe work habits. Finally, welders recognize and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Every day, welders are expected to be able to control objects and devices with precise control. They need to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for welders to ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. They are often called upon to examine workpieces for defects and measure workpieces with straightedges or templates to insure conformance with specifications. They also ready all material surfaces to be welded, ensuring that there is no loose or thick scale, slag or other foreign matter. They are sometimes expected to monitor the fitting and welding processes to avoid overheating of components or warping or expansion of material. Somewhat less frequently, welders are also expected to operate manual or semi-automatic welding apparatus to fuse metal segments.
Welders sometimes are asked to operate metal shaping and bending machines, such as brakes and shears. And finally, they sometimes have to decide on and install torches, torch tips and flux, in line with welding chart specifications or types and thicknesses of metals.
Like many other jobs, welders must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Palm Bay include:
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Machinist. Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, shop mathematics, and machining procedures.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Structural and Ornamental Metalwork Metal Fabricator. Fabricate, lay out, and fit parts of structural metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Welder Training
Brevard Community College - Cocoa, FL
Brevard Community College, 1519 Clearlake Rd, Cocoa, FL 32922. Brevard Community College is a large college located in Cocoa, Florida. It is a public school with primarily 2-year programs and has 15,607 students. Brevard Community College has a one to two year program in Welding Technology/Welder which graduated two students in 2008.
Radiographic Interpreter: The program, based upon requirements contained within AWS B5.
For more information, see the American Welding Society website.
Certified Robotic Arc Welding: The Certification Program for Robotic Arc Welding - Operators and Technicians (CRAW) allows many welding personnel employed in various welding sectors to measure themselves against standards for their occupation.
For more information, see the American Welding Society website.
LOCATION INFORMATION: Palm Bay, Florida
Palm Bay is located in Brevard County, Florida. It has a population of over 100,786, which has grown by 26.9% in the past ten years. The cost of living index in Palm Bay, 83, is well below the national average. New single-family homes in Palm Bay are priced at $195,600 on average, which is far less than the state average. In 2008, three hundred ninety-two new homes were built in Palm Bay, down from seven hundred thirty-nine the previous year.
The top three industries for women in Palm Bay are health care, educational services, and accommodation and food services. For men, it is construction, computer and electronic products, and accommodation and food services. The average commute to work is about 26 minutes. More than 16.7% of Palm Bay residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 4.9%, is lower than the state average.
The unemployment rate in Palm Bay is 11.9%, which is greater than Florida's average of 11.3%.
The percentage of Palm Bay residents that are affiliated with a religious congregation, 39.2%, is less than both the national and state average. The most common religious groups are the Catholic Church, the Southern Baptist Convention and the United Methodist Church.
Palm Bay is home to the Country Club Plaza and the Port Malabar Plaza. Shopping malls in the area include Palm Bay Shopping Center and Port Malabar Shopping Center. Visitors to Palm Bay can choose from Bay Breeze Restaurant and Bleachers Sports Bar & Grill for temporary stays in the area.