Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Structural and Ornamental Metalwork Metal Fabricators in Palm Bay, Florida

Palm Bay, Florida provides a wide variety of opportunities, both career and educational, for structural and ornamental metalwork metal fabricators. Currently, 3,440 people work as structural and ornamental metalwork metal fabricators in Florida. This is expected to grow 11% to about 3,800 people by 2016. This is better than the national trend for structural and ornamental metalwork metal fabricators, which sees this job pool shrinking by about 0.4% over the next eight years. Structural and ornamental metalwork metal fabricators generally fabricate, lay out, and fit parts of structural metal products.

The income of a structural and ornamental metalwork metal fabricator is about $14 hourly or $30,330 per year on average in Florida. In the U.S. as a whole, their income is about $15 hourly or $32,400 annually on average. Earnings for structural and ornamental metalwork metal fabricators are better than earnings in the general category of Assembling and Fabrication in Florida and better than general Assembling and Fabrication category earnings nationally.

There is one school within twenty-five miles of Palm Bay where you can study to be a structural and ornamental metalwork metal fabricator, among five schools of higher education total in the Palm Bay area. Structural and ornamental metalwork metal fabricators usually hold a high school diploma or GED, so you can expect to spend only a short time studying to be a structural and ornamental metalwork metal fabricator if you already have a high school diploma.

CAREER DESCRIPTION: Structural and Ornamental Metalwork Metal Fabricator

Structural and Ornamental Metalwork Metal Fabricator video from the State of New Jersey Dept. of Labor and Workforce Development

In general, structural and ornamental metalwork metal fabricators fabricate, lay out, and fit parts of structural metal products.

Structural and ornamental metalwork metal fabricators position and weld components to fashion complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools. They also move components into position, manually or with hoists or cranes. Equally important, structural and ornamental metalwork metal fabricators have to lay out and examine metal stock or workpieces to be processed to insure that specifications are met. They are often called upon to verify conformance of workpieces to given requirements, using squares, rulers, and measuring tapes. They are expected to tack-weld fitted components together. Finally, structural and ornamental metalwork metal fabricators smooth workpiece edges and fix taps, tubes, and valves.

Every day, structural and ornamental metalwork metal fabricators are expected to be able to visualize how things come together and can be organized. They need to see details at a very fine level of focus. It is also important that they maintain precise control of objects and devices through a range of movements.

It is important for structural and ornamental metalwork metal fabricators to straighten warped or bent components, using sledges or bulldozers. They are often called upon to direct welders to build up low spots or short pieces with weld. They also align and fit components according to given requirements, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers. They are sometimes expected to layout and construct templates and fixtures, using hand tools. Somewhat less frequently, structural and ornamental metalwork metal fabricators are also expected to heat-treat components, using acetylene torches.

Structural and ornamental metalwork metal fabricators sometimes are asked to hammer and grind workpieces to cut and straighten metal. And finally, they sometimes have to verify conformance of workpieces to given requirements, using squares, rulers, and measuring tapes.

Like many other jobs, structural and ornamental metalwork metal fabricators must be thorough and dependable and be reliable.

Similar jobs with educational opportunities in Palm Bay include:

  • Electromechanical Equipment Assembler. Assemble or modify electromechanical equipment or devices, such as servomechanisms, gyros, and appliances.
  • Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

EDUCATIONAL OPPORTUNITIES: Structural and Ornamental Metalwork Metal Fabricator Training

Brevard Community College - Cocoa, FL

Brevard Community College, 1519 Clearlake Rd, Cocoa, FL 32922. Brevard Community College is a large college located in Cocoa, Florida. It is a public school with primarily 2-year programs and has 15,607 students. Brevard Community College has a two to four year program in Machine Shop Technology/Assistant which graduated four students in 2008.

LOCATION INFORMATION: Palm Bay, Florida

Palm Bay, Florida
Palm Bay, Florida photo by Cwolfsheep

Palm Bay is located in Brevard County, Florida. It has a population of over 100,786, which has grown by 26.9% in the past ten years. The cost of living index in Palm Bay, 83, is well below the national average. New single-family homes in Palm Bay are priced at $195,600 on average, which is far less than the state average. In 2008, three hundred ninety-two new homes were built in Palm Bay, down from seven hundred thirty-nine the previous year.

The top three industries for women in Palm Bay are health care, educational services, and accommodation and food services. For men, it is construction, computer and electronic products, and accommodation and food services. The average commute to work is about 26 minutes. More than 16.7% of Palm Bay residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 4.9%, is lower than the state average.

The unemployment rate in Palm Bay is 11.9%, which is greater than Florida's average of 11.3%.

The percentage of Palm Bay residents that are affiliated with a religious congregation, 39.2%, is less than both the national and state average. The most common religious groups are the Catholic Church, the Southern Baptist Convention and the United Methodist Church.

Palm Bay is home to the Country Club Plaza and the Port Malabar Plaza. Shopping malls in the area include Palm Bay Shopping Center and Port Malabar Shopping Center. Visitors to Palm Bay can choose from Bay Breeze Restaurant and Bleachers Sports Bar & Grill for temporary stays in the area.