Career and Education Opportunities for Welders in Orlando, Florida
There is a wide variety of career and education opportunities for welders in the Orlando, Florida area. There are currently 13,890 jobs for welders in Florida and this is projected to grow 17% to about 16,240 jobs by 2016. This is better than the nation as a whole, where employment opportunities for welders are expected to shrink by about 1.6%. Welders generally use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders earn approximately $15 hourly or $33,230 yearly on average in Florida. Nationally they average about $16 per hour or $33,560 annually. Earnings for welders are better than earnings in the general category of Foundry and Metal Work in Florida and better than general Foundry and Metal Work category earnings nationally.
There are five schools within twenty-five miles of Orlando where you can study to be a welder, among fifty schools of higher education total in the Orlando area. Given that the most common education level for welders is less than a high school diploma, you can expect to spend only a short time studying to be a welder if you already have a high school diploma.
CAREER DESCRIPTION: Welder
In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders bolt components to set required configurations and positions for welding. They also remove rough spots from workpieces, using portable grinders or scrapers. Equally important, welders have to chip or grind off excess weld or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. They are often called upon to weld components in flat or overhead positions. They are expected to operate safety equipment and use safe work habits. Finally, welders recognize and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Every day, welders are expected to be able to control objects and devices with precise control. They need to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for welders to ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. They are often called upon to examine workpieces for defects and measure workpieces with straightedges or templates to insure conformance with specifications. They also ready all material surfaces to be welded, ensuring that there is no loose or thick scale, slag or other foreign matter. They are sometimes expected to monitor the fitting and welding processes to avoid overheating of components or warping or expansion of material. Somewhat less frequently, welders are also expected to operate manual or semi-automatic welding apparatus to fuse metal segments.
Welders sometimes are asked to operate metal shaping and bending machines, such as brakes and shears. And finally, they sometimes have to decide on and install torches, torch tips and flux, in line with welding chart specifications or types and thicknesses of metals.
Like many other jobs, welders must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Orlando include:
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Machinist. Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, shop mathematics, and machining procedures.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Structural and Ornamental Metalwork Metal Fabricator. Fabricate, lay out, and fit parts of structural metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Welder Training
Ridge Career Center - Winter Haven, FL
Ridge Career Center, 7700 State Rd 544, Winter Haven, FL 33881-9518. Ridge Career Center is a small school located in Winter Haven, Florida. It is a public school with primarily 2-year programs and has 700 students. Ridge Career Center has a one to two year program in Welding Technology/Welder which graduated two students in 2008.
Lake Technical Center - Eustis, FL
Lake Technical Center, 2001 Kurt St, Eustis, FL 32726. Lake Technical Center is a small school located in Eustis, Florida. It is a public school with primarily less-than 2-year programs and has 564 students. Lake Technical Center has a one to two year program in Welding Technology/Welder which graduated seven students in 2008.
Westside Tech - Winter Garden, FL
Westside Tech, 955 E Story Rd, Winter Garden, FL 34787-3733. Westside Tech is a small school located in Winter Garden, Florida. It is a public school with primarily 2-year programs and has 883 students. Westside Tech has a one to two year program in Welding Technology/Welder which graduated twenty-one students in 2008.
Brevard Community College - Cocoa, FL
Brevard Community College, 1519 Clearlake Rd, Cocoa, FL 32922. Brevard Community College is a large college located in Cocoa, Florida. It is a public school with primarily 2-year programs and has 15,607 students. Brevard Community College has a one to two year program in Welding Technology/Welder which graduated two students in 2008.
Mid Florida Tech - Orlando, FL
Mid Florida Tech, 2900 West Oak Ridge Road, Orlando, FL 32809. Mid Florida Tech is a small school located in Orlando, Florida. It is a public school with primarily 2-year programs and has 2,969 students. Mid Florida Tech has a one to two year program in Welding Technology/Welder which graduated twenty-nine students in 2008.
Radiographic Interpreter: The program, based upon requirements contained within AWS B5.
For more information, see the American Welding Society website.
Certified Robotic Arc Welding: The Certification Program for Robotic Arc Welding - Operators and Technicians (CRAW) allows many welding personnel employed in various welding sectors to measure themselves against standards for their occupation.
For more information, see the American Welding Society website.
LOCATION INFORMATION: Orlando, Florida
Orlando is situated in Orange County, Florida. It has a population of over 230,519, which has grown by 24.0% over the last ten years. The cost of living index in Orlando, 91, is below the national average. New single-family homes in Orlando are valued at $217,400 on average, which is far less than the state average. In 2008, three hundred forty-eight new homes were built in Orlando, down from six hundred twenty-two the previous year.
The three big industries for women in Orlando are accommodation and food services, health care, and educational services. For men, it is accommodation and food services, construction, and arts, entertainment, and recreation. The average travel time to work is about 25 minutes. More than 28.2% of Orlando residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 8.3%, is higher than the state average.
The unemployment rate in Orlando is 11.1%, which is less than Florida's average of 11.3%.
The percentage of Orlando residents that are affiliated with a religious congregation, 40.2%, is less than both the national and state average. Church of Scientology of Orlando, Church of the Holy Spirit Episcopal and Metropolitan Community Church-Joy are some of the churches located in Orlando. The largest religious groups are the Catholic Church, the Southern Baptist Convention and the United Methodist Church.
Orlando is home to the Dubsdread Country Club and the Conway Center as well as Mayor Carl Langford Park and Sunshine Park. Shopping centers in the area include Lake Conway Woods Shopping Center, Colonial Plaza Mall and Coytown Shopping Center. Visitors to Orlando can choose from Blue Nile Hotel Liquidators, Clarion Hotel Universal and Buena Vista Suites for temporary stays in the area.