Career and Education Opportunities for Architectural Drafters in Orlando, Florida
Orlando, Florida provides a wide variety of opportunities, both career and educational, for architectural drafters. About 8,160 people are currently employed as architectural drafters in Florida. By 2016, this is expected to grow 20% to about 9,750 people employed. This is better than the nation as a whole, where employment opportunities for architectural drafters are expected to grow by about 9.1%. Architectural drafters generally prepare detailed drawings of architectural designs and plans for buildings and structures according to specifications provided by architect.
Architectural drafters earn about $20 per hour or $41,670 annually on average in Florida and about $21 hourly or $44,490 yearly on average nationally. Incomes for architectural drafters are not quite as good as in the overall category of Drafting in Florida, and not quite as good as the overall Drafting category nationally. People working as architectural drafters can fill a number of jobs, such as: project architect, heating and ventilating drafter, and architectural intern.
There are fifty schools of higher education in the Orlando area, including ten within twenty-five miles of Orlando where you can get a degree to start your career as an architectural drafter. The most common level of education for architectural drafters is an Associate's, or other 2-year degree. You can expect to spend about two years studying to be an architectural drafter if you already have a high school diploma.
CAREER DESCRIPTION: Architectural Drafter
In general, architectural drafters prepare detailed drawings of architectural designs and plans for buildings and structures according to specifications provided by architect.
Architectural drafters operate computer-aided drafting (CAD) equipment or conventional drafting stations to produce designs, working drawings, charts, forms and records. They also obtain and assemble data to finish architectural designs, visiting job sites to compile measurements as needed. Equally important, architectural drafters have to analyze building codes, by-laws, space and site requirements, and other technical documents and reports to establish their effect on architectural designs. They are often called upon to direct structural, electrical and mechanical designs and decide on a method of presentation to graphically represent building plans. Finally, architectural drafters draw rough and detailed scale plans for foundations, buildings and structures, on the basis of preliminary concepts, sketches, engineering calculations, specification sheets and other data.
Every day, architectural drafters are expected to be able to visualize how things come together and can be organized. They need to think through problems and come up with general rules. It is also important that they see details at a very fine level of focus.
It is important for architectural drafters to lay out and plan interior room arrangements for commercial buildings using computer-assisted drafting (CAD) equipment and software. They are often called upon to develop freehand drawings and lettering to accompany drawings. They also check dimensions of materials to be used and assign numbers to records of materials. They are sometimes expected to ready colored drawings of landscape and interior designs for presentation to client. Somewhat less frequently, architectural drafters are also expected to represent architect on construction site, ensuring builder adherence to layout specifications and advising on layout corrections, under architect's supervision.
They also have to be able to build landscape, architectural and display models And finally, they sometimes have to ready cost estimates, contracts, bidding documents and technical summaries for specific projects under an architect's supervision.
Like many other jobs, architectural drafters must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Orlando include:
- CAD/CAM Specialist. Prepare detailed working diagrams of machinery and mechanical devices, including dimensions, and other engineering information.
- Civil Draftsman. Prepare drawings and topographical and relief maps used in civil engineering projects, such as highways, bridges, pipelines, flood control projects, and water and sewerage control systems.
- Civil Engineering Technician. Apply theory and principles of civil engineering in planning, designing, and overseeing construction and maintenance of structures and facilities under the direction of engineering staff or physical scientists.
- Equipment Engineering Technician. Apply electrical theory and related knowledge to test and modify developmental or operational electrical machinery and electrical control equipment and circuitry in industrial or commercial plants and laboratories. Usually work under direction of engineering staff.
- Mechanical Engineer. Perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment. Oversee installation, operation, and repair of such equipment as centralized heat, gas, and steam systems.
EDUCATIONAL OPPORTUNITIES: Architectural Drafter Training
Florida Technical College - Orlando, FL
Florida Technical College, 12689 Challenger Parkway Suite 130, Orlando, FL 32826. Florida Technical College is a small college located in Orlando, Florida. It is a private for-profit school with primarily 2-year programs. It has 1,322 students and an admission rate of 100%. Florida Technical College has a less than one year and an associate's degree program in Drafting and Design Technology/Technician which graduated forty and thirty-four students respectively in 2008.
ITT Technical Institute-Lake Mary - Lake Mary, FL
ITT Technical Institute-Lake Mary, 1400 South International Parkway South, Lake Mary, FL 32746. ITT Technical Institute-Lake Mary is a small school located in Lake Mary, Florida. It is a private for-profit school with primarily 4-year or above programs. It has 607 students and an admission rate of 39%. ITT Technical Institute-Lake Mary has an associate's degree program in CAD/CADD Drafting and/or Design Technology/Technician which graduated twenty-eight students in 2008.
Valencia Community College - Orlando, FL
Valencia Community College, 190 South Orange Avenue, Orlando, FL 32801. Valencia Community College is a large college located in Orlando, Florida. It is a public school with primarily 2-year programs and has 35,652 students. Valencia Community College has a less than one year and an associate's degree program in Drafting and Design Technology/Technician which graduated seventy-four and fourteen students respectively in 2008.
Westside Tech - Winter Garden, FL
Westside Tech, 955 E Story Rd, Winter Garden, FL 34787-3733. Westside Tech is a small school located in Winter Garden, Florida. It is a public school with primarily 2-year programs and has 883 students. Westside Tech has a two to four year program in Architectural Drafting and Architectural CAD/CADD which graduated six students in 2008.
Lake Technical Center - Eustis, FL
Lake Technical Center, 2001 Kurt St, Eustis, FL 32726. Lake Technical Center is a small school located in Eustis, Florida. It is a public school with primarily less-than 2-year programs and has 564 students. Lake Technical Center has a one to two year program in Architectural Drafting and Architectural CAD/CADD which graduated four students in 2008.
Brevard Community College - Cocoa, FL
Brevard Community College, 1519 Clearlake Rd, Cocoa, FL 32922. Brevard Community College is a large college located in Cocoa, Florida. It is a public school with primarily 2-year programs and has 15,607 students. Brevard Community College has a less than one year and an associate's degree program in Drafting and Design Technology/Technician which graduated twenty-five and thirteen students respectively in 2008.
Technical Education Center-Osceola - Kissimmee, FL
Technical Education Center-Osceola, 501 Simpson Rd, Kissimmee, FL 34744. Technical Education Center-Osceola is a small school located in Kissimmee, Florida. It is a public school with primarily 2-year programs and has 618 students. Technical Education Center-Osceola has a one to two year program in Architectural Drafting and Architectural CAD/CADD which graduated four students in 2008.
Mid Florida Tech - Orlando, FL
Mid Florida Tech, 2900 West Oak Ridge Road, Orlando, FL 32809. Mid Florida Tech is a small school located in Orlando, Florida. It is a public school with primarily 2-year programs and has 2,969 students. Mid Florida Tech has a two to four year program in Architectural Drafting and Architectural CAD/CADD which graduated eight students in 2008.
Seminole Community College - Sanford, FL
Seminole Community College, 100 Weldon Blvd, Sanford, FL 32773-6199. Seminole Community College is a large college located in Sanford, Florida. It is a public school with primarily 2-year programs and has 14,227 students. Seminole Community College has a less than one year and an associate's degree program in Drafting and Design Technology/Technician which graduated twenty-three and one students respectively in 2008.
Ridge Career Center - Winter Haven, FL
Ridge Career Center, 7700 State Rd 544, Winter Haven, FL 33881-9518. Ridge Career Center is a small school located in Winter Haven, Florida. It is a public school with primarily 2-year programs and has 700 students. Ridge Career Center has a two to four year program in Architectural Drafting and Architectural CAD/CADD which graduated one student in 2008.
Planning and Scheduling Professional: The PSP certification is to recognize specialists who meet a demanding set of planning and scheduling criteria by a rigorous examination, experience, education and ethical qualificaion.
For more information, see the AACE International (Association for the Advancement of Cost Engineering through total cost management) website.
Certified Transfer Station Technical Associate: This certification was developed to address the increased interest in transfer stations and provide transfer station managers and others the opportunity to learn more about transfer station design and operation.
For more information, see the Solid Waste Association of North America website.
LOCATION INFORMATION: Orlando, Florida
Orlando is situated in Orange County, Florida. It has a population of over 230,519, which has grown by 24.0% over the last ten years. The cost of living index in Orlando, 91, is below the national average. New single-family homes in Orlando are valued at $217,400 on average, which is far less than the state average. In 2008, three hundred forty-eight new homes were built in Orlando, down from six hundred twenty-two the previous year.
The three big industries for women in Orlando are accommodation and food services, health care, and educational services. For men, it is accommodation and food services, construction, and arts, entertainment, and recreation. The average travel time to work is about 25 minutes. More than 28.2% of Orlando residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 8.3%, is higher than the state average.
The unemployment rate in Orlando is 11.1%, which is less than Florida's average of 11.3%.
The percentage of Orlando residents that are affiliated with a religious congregation, 40.2%, is less than both the national and state average. Church of Scientology of Orlando, Church of the Holy Spirit Episcopal and Metropolitan Community Church-Joy are some of the churches located in Orlando. The largest religious groups are the Catholic Church, the Southern Baptist Convention and the United Methodist Church.
Orlando is home to the Dubsdread Country Club and the Conway Center as well as Mayor Carl Langford Park and Sunshine Park. Shopping centers in the area include Lake Conway Woods Shopping Center, Colonial Plaza Mall and Coytown Shopping Center. Visitors to Orlando can choose from Blue Nile Hotel Liquidators, Clarion Hotel Universal and Buena Vista Suites for temporary stays in the area.