Career and Education Opportunities for Layout Technicians in Miramar, Florida
For those living in the Miramar, Florida area, there are many career and education opportunities for layout technicians. There are currently 340 working layout technicians in Florida; this should shrink by 13% to 300 working layout technicians in the state by 2016. This is not quite as good as the nation as a whole, where employment opportunities for layout technicians are expected to shrink by about 11.6%. Layout technicians generally lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing.
The income of a layout technician is about $14 per hour or $30,530 annually on average in Florida. In the U.S. as a whole, their income is about $16 hourly or $34,920 per year on average. Incomes for layout technicians are better than in the overall category of Foundry and Metal Work in Florida, and better than the overall Foundry and Metal Work category nationally.
There is one school within twenty-five miles of Miramar where you can study to be a layout technician, among seventy schools of higher education total in the Miramar area. Layout technicians usually hold a high school diploma or GED, so you can expect to spend only a short time training to become a layout technician if you already have a high school diploma.
CAREER DESCRIPTION: Layout Technician
In general, layout technicians lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. They also includes shipfitters.
Layout technicians fit and align fabricated components to be welded or assembled. They also lift and position workpieces in relation to surface plates, manually or with hoists. Equally important, layout technicians have to lay out and fabricate metal structural components such as plates and frames. Finally, layout technicians mark curves and welding symbols onto workpieces, using scribes, soapstones, punches, and hand drills.
Every day, layout technicians are expected to be able to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for layout technicians to locate center lines and verify template positions, using measuring instruments such as gauge blocks and dial indicators. They are often called upon to compute layout dimensions, and decide on and mark reference points on metal stock or workpieces for further processing, such as welding and assembly. They also formulate and develop layouts from blueprints and templates, applying knowledge of trigonometry, layout, effects of heat, and properties of metals. They are sometimes expected to formulate locations and sequences of cutting and welding operations, using compasses and rules. Somewhat less frequently, layout technicians are also expected to add dimensional details to blueprints or drawings made by other staff.
Layout technicians sometimes are asked to add dimensional details to blueprints or drawings made by other staff. And finally, they sometimes have to formulate and develop layouts from blueprints and templates, applying knowledge of trigonometry, layout, effects of heat, and properties of metals.
Like many other jobs, layout technicians must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Miramar include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Layout Technician Training
Atlantic Technical Center - Coconut Creek, FL
Atlantic Technical Center, 4700 Coconut Creek Pky, Coconut Creek, FL 33063-3902. Atlantic Technical Center is a small school located in Coconut Creek, Florida. It is a public school with primarily 2-year programs and has 1,091 students. Atlantic Technical Center has a one to two year program in Machine Tool Technology/Machinist which graduated three students in 2008.
LOCATION INFORMATION: Miramar, Florida
Miramar is located in Broward County, Florida. It has a population of over 108,484, which has grown by 49.1% over the last ten years. The cost of living index in Miramar, 117, is far greater than the national average. New single-family homes in Miramar are priced at $239,500 on average, which is well below the state average. In 2008, one hundred ten new homes were constructed in Miramar, down from one hundred thirty-eight the previous year.
The top three industries for women in Miramar are health care, educational services, and finance and insurance. For men, it is construction, public administration, and administrative and support and waste management services. The average commute to work is about 32 minutes. More than 20.7% of Miramar residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 6.6%, is lower than the state average.
The unemployment rate in Miramar is 9.7%, which is less than Florida's average of 11.3%.
The percentage of Miramar residents that are affiliated with a religious congregation, 45.9%, is less than the national average but more than the state average. Pembroke Road Church, Saint Bartholomew Church and Saint Stephens Church are among the churches located in Miramar. The most prominent religious groups are the Catholic Church, the Southern Baptist Convention and the United Methodist Church.
Miramar is home to the Parkway Plaza and the Miramar Country Club as well as Southwest Broward Junior Athletic Association and Calhoun Recreation Complex. Shopping centers in the area include Palmetto By Pass Shopping Center and Miramar Shopping Center.