Career and Education Opportunities for Layout Technicians in Coral Springs, Florida
Many educational and employment opportunities exist for layout technicians in the Coral Springs, Florida area. There are currently 340 working layout technicians in Florida; this should shrink by 13% to about 300 working layout technicians in the state by 2016. This is not quite as good as the nation as a whole, where employment opportunities for layout technicians are expected to shrink by about 11.6%. Layout technicians generally lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing.
Layout technicians earn approximately $14 hourly or $30,530 yearly on average in Florida. Nationally they average about $16 per hour or $34,920 per year. Earnings for layout technicians are better than earnings in the general category of Foundry and Metal Work in Florida and better than general Foundry and Metal Work category earnings nationally.
The Coral Springs area is home to fifty schools of higher education, including one within twenty-five miles of Coral Springs where you can get a degree as a layout technician. The most common level of education for layout technicians is a high school diploma or GED. It will take only a short time to learn to be a layout technician if you already have a high school diploma.
CAREER DESCRIPTION: Layout Technician
In general, layout technicians lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. They also includes shipfitters.
Layout technicians fit and align fabricated components to be welded or assembled. They also lift and position workpieces in relation to surface plates, manually or with hoists. Equally important, layout technicians have to lay out and fabricate metal structural components such as plates and frames. Finally, layout technicians mark curves and welding symbols onto workpieces, using scribes, soapstones, punches, and hand drills.
Every day, layout technicians are expected to be able to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for layout technicians to locate center lines and verify template positions, using measuring instruments such as gauge blocks and dial indicators. They are often called upon to compute layout dimensions, and decide on and mark reference points on metal stock or workpieces for further processing, such as welding and assembly. They also formulate and develop layouts from blueprints and templates, applying knowledge of trigonometry, layout, effects of heat, and properties of metals. They are sometimes expected to formulate locations and sequences of cutting and welding operations, using compasses and rules. Somewhat less frequently, layout technicians are also expected to add dimensional details to blueprints or drawings made by other staff.
Layout technicians sometimes are asked to add dimensional details to blueprints or drawings made by other staff. And finally, they sometimes have to formulate and develop layouts from blueprints and templates, applying knowledge of trigonometry, layout, effects of heat, and properties of metals.
Like many other jobs, layout technicians must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Coral Springs include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Layout Technician Training
Atlantic Technical Center - Coconut Creek, FL
Atlantic Technical Center, 4700 Coconut Creek Pky, Coconut Creek, FL 33063-3902. Atlantic Technical Center is a small school located in Coconut Creek, Florida. It is a public school with primarily 2-year programs and has 1,091 students. Atlantic Technical Center has a one to two year program in Machine Tool Technology/Machinist which graduated three students in 2008.
LOCATION INFORMATION: Coral Springs, Florida
Coral Springs is located in Broward County, Florida. It has a population of over 125,783, which has grown by 7.0% over the last ten years. The cost of living index in Coral Springs, 115, is well above the national average. New single-family homes in Coral Springs are valued at $140,000 on average, which is far less than the state average. In 2008, two new homes were constructed in Coral Springs, down from thirteen the previous year.
The three most popular industries for women in Coral Springs are health care, educational services, and finance and insurance. For men, it is construction, professional, scientific, and technical services, and finance and insurance. The average travel time to work is about 28 minutes. More than 33.9% of Coral Springs residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 11.6%, is higher than the state average.
The unemployment rate in Coral Springs is 8.8%, which is less than Florida's average of 11.3%.
The percentage of Coral Springs residents that are affiliated with a religious congregation, 45.9%, is less than the national average but more than the state average. Coral Baptist Church Mission, Coral Springs Community Church and Royal Palm Christian Church are among the churches located in Coral Springs. The most prominent religious groups are the Catholic Church, the Southern Baptist Convention and the United Methodist Church.
Coral Springs is home to the The Plaza at Coral Springs and the Ramblewood Plaza. Shopping centers in the area include Coral Springs Mall, Coral Square Mall and Village Green Shopping Center.