Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Plumbers in Bridgeport, Connecticut

For those living in the Bridgeport, Connecticut area, there are many career and education opportunities for plumbers. Currently, 6,040 people work as plumbers in Connecticut. This is expected to grow by 10% to 6,660 people by 2016. This is not quite as good as the nation as a whole, where employment opportunities for plumbers are expected to grow by about 15.3%. In general, plumbers assemble, install, and repair pipes, fittings, and fixtures of heating, water, and drainage systems, according to specifications and plumbing codes.

Plumbers earn approximately $27 per hour or $57,220 annually on average in Connecticut. Nationally they average about $21 hourly or $45,640 annually. Plumbers earn more than people working in the category of Plumbing generally in Connecticut and more than people in the Plumbing category nationally.

There are seventy-five schools of higher education in the Bridgeport area, including one within twenty-five miles of Bridgeport where you can get a degree to start your career as a plumber. The most common level of education for plumbers is a high school diploma or GED. It will take only a short time to learn to be a plumber if you already have a high school diploma.

CAREER DESCRIPTION: Plumber

Plumber video from the State of New Jersey Dept. of Labor and Workforce Development

In general, plumbers assemble, install, and repair pipes, fittings, and fixtures of heating, water, and drainage systems, according to specifications and plumbing codes.

Plumbers assemble pipe sections, tubing and fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, or soldering, brazing and welding equipment. They also set up pipe assemblies, fittings, valves, appliances such as dishwashers and water heaters, and fixtures such as sinks and toilets, using hand and power tools. Equally important, plumbers have to trim openings in structures to deal with pipes and pipe fittings, using hand and power tools. They are often called upon to fill pipes or plumbing fixtures with water or air and observe pressure gauges to uncover and locate leaks. They are expected to measure and bend pipe to required angles, using hand and power tools or machines such as pipe cutters, pipe-threading machines, and pipe-bending machines. Finally, plumbers study building plans and inspect structures to gauge material and equipment needs, to determine the sequence of pipe installations, and to develop installation around obstructions such as electrical wiring.

Every day, plumbers are expected to be able to twist and stretch their arms and legs to get work done. They need to control and manipulate objects at a fine level of detail. It is also important that they control objects and devices with precise control.

It is important for plumbers to keep records of assignments and produce detailed work reports. They are often called upon to clear away debris in a renovation. They also perform complex calculations and planning for special or very large jobs. They are sometimes expected to ready written work cost estimates and negotiate contracts. Somewhat less frequently, plumbers are also expected to trim openings in structures to deal with pipes and pipe fittings, using hand and power tools.

Plumbers sometimes are asked to locate and mark the position of pipe installations and fixtures in structures, using measuring instruments such as rulers and levels. They also have to be able to direct staff working on pipe cutting and preassembly and placement of plumbing systems and components and set up underground storm, sanitary and water piping systems and extend piping to connect fixtures and plumbing to these systems. And finally, they sometimes have to set up oxygen and medical gas in hospitals.

Like many other jobs, plumbers must be reliable and be thorough and dependable.

EDUCATIONAL OPPORTUNITIES: Plumber Training

Industrial Management Training Institute - Waterbury, CT

Industrial Management Training Institute, 233 Mill St, Waterbury, CT 06706. Industrial Management Training Institute is a small school located in Waterbury, Connecticut. It is a private for-profit school with primarily less-than 2-year programs and has 130 students. Industrial Management Training Institute has a less than one year program in Pipefitting/Pipefitter and Sprinkler Fitter which graduated eighteen students in 2008.

CERTIFICATIONS

Standard Journeyman Plumber: The International Code Council's National Contractor Trades Examination Program is an independent testing program designed to provide licensing agencies with information regarding.

For more information, see the International Code Council website.

Standard Residential Plumber: The International Code Council's National Contractor Trades Examination Program is an.

For more information, see the International Code Council website.

Journeyman Plumber: This certification is designed to test the knowledge that a journey level plumber has of the Uniform Plumbing Code published by the International Association of Plumbing and Mechanical Officials (IAPMO).

For more information, see the National Inspection, Testing and Certification Corporation website.

Journeyman Pipefitter-Steamfitter: The NITC journey level pipefitting/steamfitting certification is based on a written examination that consists of 100 multiple choice questions.

For more information, see the National Inspection, Testing and Certification Corporation website.

Medical Gas Installer 6010: This examination is covered under NITC's scope of accreditation by the American Standards Institute (ANSI).

For more information, see the National Inspection, Testing and Certification Corporation website.

Medical Gas Specialist 6005: Candidates shall have successfully completed twenty-four (24) hours of training covering all facets of piped medical gas and medical-surgical vacuum systems.

For more information, see the National Inspection, Testing and Certification Corporation website.

Medical Gas Maintenance Personnel 6040: Candidates must have completed thirty-two (32) hours of training in the maintenance of medical gas/vacuum systems, and have a minimum of one (1) year experience in the maintenance of medical gas/vacuum systems.

For more information, see the National Inspection, Testing and Certification Corporation website.

Bulk Medical Gas Systems Installer 6015: Certification to this standard shall be through a method approved by the firm's Quality Control Unit (QCU).

For more information, see the National Inspection, Testing and Certification Corporation website.

IAPMO Mechanical Inspector: IAPMO's National Personnel Certification Program for Inspectors, Plans Examiners and Code Administrators is a nationally recognized, comprehensive testing and certification program that assesses the knowledge of construction codes as an indicator of competence and professionalism.

For more information, see the National Inspection, Testing and Certification Corporation website.

Automatic Sprinkler System Layout: This certification program is for engineering technicians engaged in the layout and detailing of automatic sprinkler systems which must meet existing and proposed code and statutory requirements.

For more information, see the National Institute for Certification in Engineering Technologies website.

LICENSES

Plumbing and Piping Contractor

Licensing agency: Department of Consumer Protection
Address: Occupational & Professional Licensing, 165 Capitol Avenue, Hartford, CT 06106-1630

Phone: (860) 713-6135
Website: Department of Consumer Protection Occupational & Professional Licensing

Plumbing and Piping Journeyperson

Licensing agency: Department of Consumer Protection
Address: Occupational & Professional Licensing, 165 Capitol Avenue, Hartford, CT 06106-1630

Phone: (860) 713-6135
Website: Department of Consumer Protection Occupational & Professional Licensing

LOCATION INFORMATION: Bridgeport, Connecticut

Bridgeport, Connecticut
Bridgeport, Connecticut photo by Xtremeyanksfan22

Bridgeport is located in Fairfield County, Connecticut. It has a population of over 136,405, which has shrunk by 2.2% in the past ten years. The cost of living index in Bridgeport, 151, is far greater than the national average. New single-family homes in Bridgeport are valued at $110,900 on average, which is far less than the state average. In 2008, twenty-six new homes were built in Bridgeport, down from forty-one the previous year.

The three big industries for women in Bridgeport are health care, educational services, and finance and insurance. For men, it is construction, administrative and support and waste management services, and accommodation and food services. The average commute to work is about 25 minutes. More than 12.2% of Bridgeport residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 4.6%, is lower than the state average.

The unemployment rate in Bridgeport is 12.1%, which is greater than Connecticut's average of 8.3%.

The percentage of Bridgeport residents that are affiliated with a religious congregation, 70.1%, is more than both the national and state average. Calvary Episcopal Church, Golden Hill United Methodist Church and Good Shepherd Christian Church are among the churches located in Bridgeport. The most common religious groups are the Catholic Church, the Episcopal Church and the United Church of Christ.

Bridgeport is home to the North Branch Bridgeport Public Library and the Challenger Learning Center as well as Went Field and Johnson Oak Park. Shopping centers in the area include Lafayette Shopping Plaza Shopping Center, Baldwin Plaza Shopping Center and Bayview Shopping Center.