Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Equipment Engineering Technicians in Bridgeport, Connecticut

Equipment engineering technicians can find both educational opportunities and jobs in the Bridgeport, Connecticut area. The national trend for equipment engineering technicians sees this job pool shrinking by about 2.2% over the next eight years. Equipment engineering technicians generally apply electrical theory and related knowledge to test and modify developmental or operational electrical machinery and electrical control equipment and circuitry in industrial or commercial plants and laboratories.

Income for equipment engineering technicians is about $26 hourly or $54,140 yearly on average in Connecticut. Nationally, their income is about $25 per hour or $53,240 yearly. Earnings for equipment engineering technicians are not quite as good as earnings in the general category of Engineering Technologies in Connecticut and not quite as good as general Engineering Technologies category earnings nationally. Equipment engineering technicians work in a variety of jobs, including: engineering assistant, electrical engineer, and electronic engineering technician.

There are seventy-five schools of higher education in the Bridgeport area, including eight within twenty-five miles of Bridgeport where you can get a degree to start your career as an equipment engineering technician. The most common level of education for equipment engineering technicians is some college courses. You can expect to spend a short time training to become an equipment engineering technician if you already have a high school diploma.

CAREER DESCRIPTION: Equipment Engineering Technician

In general, equipment engineering technicians apply electrical theory and related knowledge to test and modify developmental or operational electrical machinery and electrical control equipment and circuitry in industrial or commercial plants and laboratories. They also usually work under direction of engineering staff.

Equipment engineering technicians collaborate with electrical engineers and other personnel to pinpoint and solve developmental problems. Finally, equipment engineering technicians furnish technical assistance and resolution when electrical or engineering problems are encountered before and after construction.

Every day, equipment engineering technicians are expected to be able to articulate ideas and problems. They need to listen to and understand others in meetings. It is also important that they write clearly and communicate well.

It is important for equipment engineering technicians to assemble and operate test apparatus to evaluate effectiveness of developmental parts or systems under simulated operating conditions, and record results. They are often called upon to assemble electrical and electronic systems and prototypes in line with engineering data and knowledge of electrical principles, using hand tools and measuring instruments. They also analyze and interpret test data to deal with design-related problems. They are sometimes expected to set up and maintain electrical control systems and solid state equipment. Somewhat less frequently, equipment engineering technicians are also expected to conduct inspections for quality control and assurance programs, reporting findings and recommendations.

Equipment engineering technicians sometimes are asked to ready project cost and work-time estimates. They also have to be able to ready contracts and initiate, review and direct modifications to contract specifications and plans throughout the construction process and evaluate engineering proposals, shop drawings and layout comments for sound electrical engineering practice and conformance with established safety and layout criteria, and recommend approval or disapproval. And finally, they sometimes have to furnish technical assistance and resolution when electrical or engineering problems are encountered before and after construction.

Like many other jobs, equipment engineering technicians must be thorough and dependable and be reliable.

Similar jobs with educational opportunities in Bridgeport include:

  • Architectural Drafter. Prepare detailed drawings of architectural designs and plans for buildings and structures according to specifications provided by architect.
  • CAD/CAM Specialist. Prepare detailed working diagrams of machinery and mechanical devices, including dimensions, and other engineering information.
  • Civil Engineering Technician. Apply theory and principles of civil engineering in planning, designing, and overseeing construction and maintenance of structures and facilities under the direction of engineering staff or physical scientists.
  • Electronics Engineering Technician. Lay out, build, and modify developmental and production electronic components, parts, and systems, such as computer equipment, missile control instrumentation, electron tubes, and machine tool numerical controls, applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. Usually work under direction of engineering staff.
  • Environmental Engineering Technician. Apply theory and principles of environmental engineering to modify, test, and operate equipment and devices used in the prevention, control, and remediation of environmental pollution, including waste treatment and site remediation. May assist in the development of environmental pollution remediation devices under direction of engineer.
  • Industrial Engineering Technician. Apply engineering theory and principles to problems of industrial layout or manufacturing production, usually under the direction of engineering staff. May study and record time, motion, and speed involved in performance of production, maintenance, and other worker operations for such purposes as establishing standard production rates or improving efficiency.
  • Mechanical Engineer. Perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment. Oversee installation, operation, and repair of such equipment as centralized heat, gas, and steam systems.
  • Mechanical Engineering Technician. Apply theory and principles of mechanical engineering to modify, develop, and test machinery and equipment under direction of engineering staff or physical scientists.

EDUCATIONAL OPPORTUNITIES: Equipment Engineering Technician Training

Naugatuck Valley Community College - Waterbury, CT

Naugatuck Valley Community College, 750 Chase Parkway, Waterbury, CT 06708-3089. Naugatuck Valley Community College is a medium sized college located in Waterbury, Connecticut. It is a public school with primarily 2-year programs and has 5,880 students. Naugatuck Valley Community College has 2 areas of study related to Equipment Engineering Technician. They are:

  • Electrical & Electronic Engineering Technologies/Technicians, Other Specialties, associate's degree which graduated 7 students in 2008.
  • Computer Engineering Technology/Technician, less than one year and associate's degree which graduated seven and fifteen students respectively in 2008.

Central Connecticut State University - New Britain, CT

Central Connecticut State University, 1615 Stanley St, New Britain, CT 06050. Central Connecticut State University is a large university located in New Britain, Connecticut. It is a public school with primarily 4-year or above programs. It has 12,233 students and an admission rate of 60%. Central Connecticut State University has a bachelor's degree program in Computer Engineering Technology/Technician.

Porter and Chester Institute of Branford - Branford, CT

Porter and Chester Institute of Branford, 221 W Main St, Branford, CT 06405. Porter and Chester Institute of Branford is a small school located in Branford, Connecticut. It is a private for-profit school with primarily less-than 2-year programs and has 289 students. Porter and Chester Institute of Branford has a one to two year program in Computer Technology/Computer Systems Technology.

SUNY Westchester Community College - Valhalla, NY

SUNY Westchester Community College, 75 Grasslands Road, Valhalla, NY 10595. SUNY Westchester Community College is a large college located in Valhalla, New York. It is a public school with primarily 2-year programs and has 11,090 students. SUNY Westchester Community College has an associate's degree program in Electrical, Electronic & Communications Engineering Technology/Technician which graduated eighteen students in 2008.

Norwalk Community College - Norwalk, CT

Norwalk Community College, 188 Richards Avenue, Norwalk, CT 06854. Norwalk Community College is a medium sized college located in Norwalk, Connecticut. It is a public school with primarily 2-year programs and has 6,266 students. Norwalk Community College has 2 areas of study related to Equipment Engineering Technician. They are:

  • Electrical & Electronic Engineering Technologies/Technicians, Other Specialties, associate's degree.
  • Computer Technology/Computer Systems Technology, associate's degree which graduated 1 student in 2008.

University of New Haven - West Haven, CT

University of New Haven, 300 Boston Post Road, West Haven, CT 06516. University of New Haven is a medium sized university located in West Haven, Connecticut. It is a private not-for-profit school with primarily 4-year or above programs. It has 5,739 students and an admission rate of 68%. University of New Haven has a postbaccalaureate certificate program in Telecommunications Technology/Technician.

Gateway Community College - New Haven, CT

Gateway Community College, 60 Sargent Dr, New Haven, CT 06511. Gateway Community College is a medium sized college located in New Haven, Connecticut. It is a public school with primarily 2-year programs and has 5,140 students. Gateway Community College has 2 areas of study related to Equipment Engineering Technician. They are:

  • Electrical & Electronic Engineering Technologies/Technicians, Other Specialties, associate's degree which graduated 2 students in 2008.
  • Computer Engineering Technology/Technician, less than one year and associate's degree which graduated four and six students respectively in 2008.

Porter and Chester Institute - Stratford, CT

Porter and Chester Institute, 670 Lordship Blvd, Stratford, CT 06615-7158. Porter and Chester Institute is a small school located in Stratford, Connecticut. It is a private for-profit school with primarily less-than 2-year programs and has 2,058 students. Porter and Chester Institute has a one to two year program in Computer Technology/Computer Systems Technology which graduated thirty-eight students in 2008.

CERTIFICATIONS

Calibration Technician: The Certified Calibration Technician tests, calibrates, maintains and repairs electrical, mechanical, electromechanical, analytical and electronic measuring, recording and indicating instruments and equipment for conformance to established standards.

For more information, see the American Society for Quality website.

Geometric Dimensioning & Tolerancing Professional - Technologist: ASME GDTP Certification provides the means to recognize proficiency in the understanding and application of the geometric dimensioning and tolerancing (GD&T) principles expressed in the ASME Y14.

For more information, see the American Society of Mechanical Engineers International website.

Certified Lighting Efficiency Professional: AEE's Certified Lighting Efficiency Professional (CLEP) program is designed to provide recognition for professionals who have distinguished themselves as leaders in the field of lighting efficiency.

For more information, see the Association of Energy Engineers website.

Consumer Electronics Service Technician: Consumer Electronics Service Technicians are expected to have knowledge and abilities to operate, install and service home.

For more information, see the ETA International website.

Certified Industrial Electronics Technician: A technician with two or more years of combined work and electronics training may apply for the Journeyman exam.

For more information, see the ETA International website.

Student Electronics Technician (High School Level): Training electronics workers as entry level, apprenticed, installer personnel should include the following 19 Categories: Electrical Theory, Electronic Components, Soldering-Desoldering and Tools, Block Diagrams, Schematics-Wiring Diagrams, Cabling, Power Supplies, Test Equipment & Measurements, Safety Precautions, Mathematics and Formulas, Electronic Circuits: Series and Parallel, Amplifiers, Interfacing of Electronics Products, Digital Concepts and Circuitry, Computer Electronics, Computer Applications, Audio & Video Systems, Optical Electronics, Telecommunications Basics, and Technician Work Procedures.

For more information, see the ETA International website.

RF Line Sweeping: RF Line Sweeping, or FDR, Frequency Domain Reflectometry, certification by the Electronics Technicians Association, Internationa, has two assessments: The 16 category knowledge written multiple-choice examination, and the practical hands-on physical abilities and skills demonstration documented during a formal training course.

For more information, see the ETA International website.

Associate Certified Electronics Technician: Knowledge areas include: Electrical Theory, Electronic Components, Soldering-Desoldering & Tools, Block Diagrams - Schematics - Wiring Diagrams, Cabling, Power Supplies, test Equipment & Measurements, Safety Precautions, Mathematics & Formulas, Radio Communication Technology, Electronic Circuits: Series & Parallel, Amplifiers, Interfacing of Electronics Products, Digital Concepts & Circuitry, Computer Electronics, Computer Applications, Audio & Video Systems, Optical Electronics, Telecommunications Basics, Technician Work Procedures.

For more information, see the ETA International website.

Certified Apprentice Lighting Technician: NALMCO offers a home study certification program, the Certified Apprentice Lighting Technician (CALT), which is indispensable for both entry-level and midlevel lighting management personnel.

For more information, see the International Association of Lighting Management Companies website.

Certified Senior Lighting Technician: NALMCO offers a home study certification program, the Certified Senior Lighting Technician (CSLT) which is indispensable for both entry-level and midlevel lighting management personnel.

For more information, see the International Association of Lighting Management Companies website.

Electron Microscopy Technologist: The Microscopy Society of America (MSA), the world's largest professional association of microscopists, provides the only certification of technologists in biological transmission electron microscopy available in the Americas.

For more information, see the Microscopy Society of America website.

Corrosion Technician: This certification is geared towards personnel with little experience but who possess some basic knowledge of corrosion and corrosion control, who are capable of performing routine, but well-defined work under the close direction of Specialist or Senior Technologist personnel.

For more information, see the NACE International website.

EMC (Electromagnetic Compatibility) Technician: iNARTE's EMC certification is applicable to professional engineers and technicians practicing in EMC fields to include bonding, grounding, shielding, EMI prediction, EMI analysis, conducted and radiated interference, lightning protection and more.

For more information, see the National Association of Radio and Telecommunications Engineers, Inc. website.

ESD (Electrostatic Discharge) Technician: ESD Control certification is appropriate for engineers and technicians whose training and experience have primarily focused on problems, engineering design and corrective measures associated with minimizing or eliminating electrostatic discharge.

For more information, see the National Association of Radio and Telecommunications Engineers, Inc. website.

Junior Telecommunications Technician: Telecommunications certification is applicable to professionals involved in the science and practice of communications by electromagnetic means.

For more information, see the National Association of Radio and Telecommunications Engineers, Inc. website.

System Operator Certification: The System Operator Certification Program awards certification credentials to those individuals who demonstrate that they have attained sufficient knowledge relating to NERC reliability standards and the basic principles of bulk power system operations by passing one of four specialty examinations.

For more information, see the North American Electric Reliability Corporation website.

Broadband Distribution Specialist: Certifies proficiency in the subject matter related to the RF distribution of signals.

For more information, see the Society of Cable Telecommunications Engineers website.

Certified Manufacturing Technologist: This certification primarily benefits new manufacturing engineers and experienced manufacturers without other credentials.

For more information, see the Society of Manufacturing Engineers website.

LOCATION INFORMATION: Bridgeport, Connecticut

Bridgeport, Connecticut
Bridgeport, Connecticut photo by Xtremeyanksfan22

Bridgeport is located in Fairfield County, Connecticut. It has a population of over 136,405, which has shrunk by 2.2% in the past ten years. The cost of living index in Bridgeport, 151, is far greater than the national average. New single-family homes in Bridgeport are valued at $110,900 on average, which is far less than the state average. In 2008, twenty-six new homes were built in Bridgeport, down from forty-one the previous year.

The three big industries for women in Bridgeport are health care, educational services, and finance and insurance. For men, it is construction, administrative and support and waste management services, and accommodation and food services. The average commute to work is about 25 minutes. More than 12.2% of Bridgeport residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 4.6%, is lower than the state average.

The unemployment rate in Bridgeport is 12.1%, which is greater than Connecticut's average of 8.3%.

The percentage of Bridgeport residents that are affiliated with a religious congregation, 70.1%, is more than both the national and state average. Calvary Episcopal Church, Golden Hill United Methodist Church and Good Shepherd Christian Church are among the churches located in Bridgeport. The most common religious groups are the Catholic Church, the Episcopal Church and the United Church of Christ.

Bridgeport is home to the North Branch Bridgeport Public Library and the Challenger Learning Center as well as Went Field and Johnson Oak Park. Shopping centers in the area include Lafayette Shopping Plaza Shopping Center, Baldwin Plaza Shopping Center and Bayview Shopping Center.