Career and Education Opportunities for Product Safety Engineers in Westminster, Colorado
If you want to be a product safety engineer, the Westminster, Colorado area offers many opportunities both for education and employment. Currently, 470 people work as product safety engineers in Colorado. This is expected to grow by 42% to about 670 people by 2016. This is better than the national trend for product safety engineers, which sees this job pool growing by about 10.3% over the next eight years. In general, product safety engineers develop and conduct tests to evaluate product safety levels and recommend measures to reduce or eliminate hazards.
Income for product safety engineers is about $32 per hour or $67,520 per year on average in Colorado. Nationally, their income is about $34 hourly or $72,490 yearly. Incomes for product safety engineers are not quite as good as in the overall category of Engineering in Colorado, and not quite as good as the overall Engineering category nationally. Product safety engineers work in a variety of jobs, including: product safety tester, product safety test engineer, and product safety consultant.
The Westminster area is home to sixty-four schools of higher education, including two within twenty-five miles of Westminster where you can get a degree as a product safety engineer. The most common level of education for product safety engineers is a Bachelor's degree. It will take about four years to learn to be a product safety engineer if you already have a high school diploma.
CAREER DESCRIPTION: Product Safety Engineer
In general, product safety engineers develop and conduct tests to evaluate product safety levels and recommend measures to reduce or eliminate hazards.
Product safety engineers evaluate potential health hazards or damage that could occur from product misuse. They also participate in preparation of product usage and precautionary label instructions. Equally important, product safety engineers have to recommend processes for detection and elimination of physical or other product hazards. They are often called upon to conduct research to review safety levels for products. They are expected to investigate causes of accidents or illnesses pertaining to product usage in order to evolve solutions to minimize or avoid recurrence. Finally, product safety engineers report accident investigation findings.
Every day, product safety engineers are expected to be able to evaluate problems as they arise. It is also important that they listen to and understand others in meetings.
And finally, they sometimes have to recommend processes for detection and elimination of physical or other product hazards.
Like many other jobs, product safety engineers must have exceptional integrity and be thorough and dependable.
Similar jobs with educational opportunities in Westminster include:
- Aerodynamics Engineer. Perform a variety of engineering work in designing, constructing, and testing aircraft, missiles, and spacecraft. May conduct basic and applied research to evaluate adaptability of materials and equipment to aircraft design and manufacture. May recommend improvements in testing equipment and techniques.
- Biomedical Engineer. Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
- Chemical Engineer. Design chemical plant equipment and devise processes for manufacturing chemicals and products, such as gasoline, synthetic rubber, and pulp, by applying principles and technology of chemistry, physics, and engineering.
- Civil Engineer. Perform engineering duties in planning, designing, and overseeing construction and maintenance of building structures, and facilities, such as roads, railroads, airports, bridges, harbors, channels, dams, irrigation projects, pipelines, power plants, water and sewage systems, and waste disposal units. Includes architectural, structural, and geo-technical engineers.
- Computer Engineer. Research, design, and test computer or computer-related equipment for commercial, industrial, or scientific use. May supervise the manufacturing and installation of computer or computer-related equipment and components.
- Electrical Engineer. Design, develop, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, or scientific use.
- Electronics Engineer. Research, design, and test electronic components and systems for commercial, industrial, or scientific use utilizing knowledge of electronic theory and materials properties. Design electronic circuits and components for use in fields such as telecommunications, aerospace guidance and propulsion control, acoustics, or instruments and controls.
- Fire Prevention Research Engineer. Research causes of fires, determine fire protection methods, and design or recommend materials or equipment such as structural components or fire-detection equipment to assist organizations in safeguarding life and property against fire, explosion, and related hazards.
- Health, Safety, and Environment Manager. Plan, implement, and coordinate safety programs, requiring application of engineering principles and technology, to prevent or correct unsafe environmental working conditions.
- Materials Engineer. Evaluate materials and develop machinery and processes to manufacture materials for use in products that must meet specialized design and performance specifications. Develop new uses for known materials. Includes those working with composite materials or specializing in one type of material, such as graphite, metal and metal alloys, ceramics and glass, plastics and polymers, and naturally occurring materials.
- Mechanical Engineer. Perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment. Oversee installation, operation, and repair of such equipment as centralized heat, gas, and steam systems.
- Petroleum Engineer. Devise methods to improve oil and gas well production and determine the need for new or modified tool designs. Oversee drilling and offer technical advice to achieve economical and satisfactory progress.
EDUCATIONAL OPPORTUNITIES: Product Safety Engineer Training
University of Colorado at Boulder - Boulder, CO
University of Colorado at Boulder, Regent Drive at Broadway, Boulder, CO 80309-0017. University of Colorado at Boulder is a large university located in Boulder, Colorado. It is a public school with primarily 4-year or above programs. It has 32,191 students and an admission rate of 78%. University of Colorado at Boulder has a bachelor's degree program in Environmental/Environmental Health Engineering which graduated eleven students in 2008.
Colorado School of Mines - Golden, CO
Colorado School of Mines, 1500 Illinois St, Golden, CO 80401. Colorado School of Mines is a small school located in Golden, Colorado. It is a public school with primarily 4-year or above programs. It has 4,488 students and an admission rate of 61%. Colorado School of Mines has a master's degree and a doctor's degree program in Environmental/Environmental Health Engineering which graduated twenty-one and one students respectively in 2008.
Risk Management for Public Entities: Understand the unique nature of the public sector.
For more information, see the American Institute for CPCU and Insurance Institute of America website.
Certified Energy Manager: Since its inception in 1981, the Certified Energy Manager (CEM®) credential has become widely accepted and used as a measure of professional accomplishment within the energy management field.
For more information, see the Association of Energy Engineers website.
Certified Water Technologist: The Certified Water Technologist (CWT) program represents the highest professional credential in the industrial and commercial water treatment field.
For more information, see the Association of Water Technologies website.
Certified Professional Ergonomist: The BCPE was established to provide a formal process for recognizing practitioners of human factors/ergonomics.
For more information, see the Board of Certification in Professional Ergonomics website.
Certified Environmental Health Technician: CEHT is for individuals who are interested in field intensive environmental health activities--such as testing, sampling, and inspections, and who are required to provide information on safe environmental health practices and to eliminate environmental health hazards.
For more information, see the National Environmental Health Association website.
Inspection and Testing of Water-Based Systems: This certification program was designed for engineering technicians in the automatic fire sprinkler industry who are engaged in the physical and mechanical aspects of inspection, testing, and maintenance of water-based systems including foam and foam-water systems.
For more information, see the National Institute for Certification in Engineering Technologies website.
Registered Radiation Protection Technologist: A Radiation Protection Technologist is a person engaged in providing radiation protection to the radiation worker, the general public, and the environment from the effects of ionizing radiation.
For more information, see the National Registry of Radiation Protection Technologists website.
Municipal Solid Waste Management Systems - Technical Associate: By earning this certification, you will demonstrate knowledge and proficiency that only the top in a field can show.
For more information, see the Solid Waste Association of North America website.
Bioreactor Landfill - Technical Associate: By earning this certification, you will demonstrate knowledge and proficiency in this new technology.
For more information, see the Solid Waste Association of North America website.
LOCATION INFORMATION: Westminster, Colorado
Westminster is located in Adams County, Colorado. It has a population of over 107,056, which has grown by 6.1% over the last ten years. The cost of living index in Westminster, 96, is near the national average. New single-family homes in Westminster are valued at $376,500 on average, which is far greater than the state average. In 2008, sixty-two new homes were built in Westminster, down from one hundred forty-six the previous year.
The three most popular industries for women in Westminster are health care, educational services, and professional, scientific, and technical services. For men, it is construction, professional, scientific, and technical services, and computer and electronic products. The average travel time to work is about 27 minutes. More than 31.3% of Westminster residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 9.3%, is lower than the state average.
The unemployment rate in Westminster is 6.2%, which is less than Colorado's average of 6.6%.
The percentage of Westminster residents that are affiliated with a religious congregation, 30.4%, is less than both the national and state average. The most prominent religious groups are the Catholic Church, the LDS (Mormon) Church and the Lutheran Church.
Westminster is home to the The Golf Courses at Hyland Hills and the The Plaza at Westminster. Visitors to Westminster can choose from Comfort Suites, LA Quinta - Inns- Westminster Mall and Doubletree Hotel Denver Boulder for temporary stays in the area.