Career and Education Opportunities for Stone Cutters in Denver, Colorado
For those living in the Denver, Colorado area, there are many career and education opportunities for stone cutters. There are currently 760 working stone cutters in Colorado; this should grow by 25% to about 950 working stone cutters in the state by 2016. This is better than the national trend for stone cutters, which sees this job pool growing by about 2.8% over the next eight years. Stone cutters generally cut or carve stone according to diagrams and patterns.
Stone cutters earn about $15 hourly or $32,420 per year on average in Colorado and about $13 hourly or $27,870 per year on average nationally. Earnings for stone cutters are not quite as good as earnings in the general category of Stone and Glass in Colorado and not quite as good as general Stone and Glass category earnings nationally.
There are sixty-four schools of higher education in the Denver area, including one within twenty-five miles of Denver where you can get a degree to start your career as a stone cutter. Stone cutters usually hold a high school diploma or GED, so you can expect to spend only a short time studying to be a stone cutter if you already have a high school diploma.
CAREER DESCRIPTION: Stone Cutter
In general, stone cutters cut or carve stone according to diagrams and patterns.
Stone cutters verify depths and dimensions of cuts or carvings to insure adherence to given requirements or models, using measuring instruments. They also drill holes and cut or carve moldings and grooves in stone, in line with diagrams and patterns. Equally important, stone cutters have to carve rough designs freehand or by chipping along marks on stone, using mallets and chisels or pneumatic tools. They are often called upon to lay out designs or dimensions from sketches or blueprints on stone surfaces, by freehand or by transferring them from tracing paper, using scribes or chalk and measuring instruments. They are expected to cut and finish rough blocks of building or monumental stone, in line with diagrams or patterns. Finally, stone cutters smooth surfaces of carvings, using rubbing stones.
Every day, stone cutters are expected to be able to control objects and devices with precise control. It is also important that they see details at a very fine level of focus.
It is important for stone cutters to dress stone surfaces, using bushhammers. They are often called upon to guide nozzles over stone following stencil outlines, or chip along marks to generate designs or to work surfaces down to specified finishes. They also load sandblasting equipment with abrasives, attach nozzles to hoses, and turn valves to admit compressed air and activate jets. Somewhat less frequently, stone cutters are also expected to copy drawings on rough clay or plaster models.
and decide on chisels, pneumatic or surfacing tools, or sandblasting nozzles, and decide on sequence of use. And finally, they sometimes have to move fingers over surfaces of carvings to insure smoothness of finish.
Like many other jobs, stone cutters must be thorough and dependable and be reliable.
EDUCATIONAL OPPORTUNITIES: Stone Cutter Training
Emily Griffith Opportunity School - Denver, CO
Emily Griffith Opportunity School, 1250 Welton Street, Denver, CO 80204-2197. Emily Griffith Opportunity School is a small school located in Denver, Colorado. It is a public school with primarily less-than 2-year programs and has 2,148 students. Emily Griffith Opportunity School has a less than one year program in Mason/Masonry.
LOCATION INFORMATION: Denver, Colorado
Denver is located in Denver County, Colorado. It has a population of over 598,707, which has grown by 7.9% over the last ten years. The cost of living index in Denver, 102, is near the national average. New single-family homes in Denver are priced at $223,800 on average, which is below the state average. In 2008, eight hundred thirty-seven new homes were constructed in Denver, down from 1,215 the previous year.
The top three industries for women in Denver are health care, educational services, and professional, scientific, and technical services. For men, it is construction, professional, scientific, and technical services, and accommodation and food services. The average travel time to work is about 25 minutes. More than 34.5% of Denver residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 12.4%, is higher than the state average.
The percentage of Denver residents that are affiliated with a religious congregation, 53.0%, is more than both the national and state average. The most prominent religious groups are the Catholic Church, the American Baptist Churches in the USA and the Episcopal Church.
Denver is home to the J F Kennedy Municipal Golf Course and the North Marston Filtration Plant as well as Cheesman Park and Bear Creek Park. Shopping malls in the area include Alameda Square Shopping Center, Boulevard Shopping Center and Brentwood Plaza Shopping Center. Visitors to Denver can choose from Embassy Suites Hotel Denver Downtown, Intown Suites Aurora and Denver Marriott City Center for temporary stays in the area.