Career and Education Opportunities for Sheet Metal Workers in Denver, Colorado
Many educational and employment opportunities exist for sheet metal workers in the Denver, Colorado area. About 3,030 people are currently employed as sheet metal workers in Colorado. By 2016, this is expected to grow 35% to 4,080 people employed. This is better than the national trend for sheet metal workers, which sees this job pool growing by about 6.5% over the next eight years. Sheet metal workers generally fabricate, assemble, and repair sheet metal products and equipment, such as ducts, control boxes, and furnace casings.
Sheet metal workers earn approximately $18 hourly or $39,340 per year on average in Colorado. Nationally they average about $19 hourly or $40,290 annually. Earnings for sheet metal workers are not quite as good as earnings in the general category of Metal Working and Welding in Colorado and not quite as good as general Metal Working and Welding category earnings nationally.
There is one school within twenty-five miles of Denver where you can study to be a sheet metal worker, among sixty-four schools of higher education total in the Denver area. The most common level of education for sheet metal workers is a high school diploma or GED. It will take only a short time to learn to be a sheet metal worker if you already have a high school diploma.
CAREER DESCRIPTION: Sheet Metal Worker
In general, sheet metal workers fabricate, assemble, and repair sheet metal products and equipment, such as ducts, control boxes, and furnace casings. They also work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; inspecting, assembling, and smoothing seams and joints of burred surfaces.
Sheet metal workers drill and punch holes in metal for screws, bolts, and rivets. They also lay out and mark dimensions and reference lines on material, such as roofing panels, in line with drawings or templates, using calculators, scribes, dividers, squares, and rulers. Equally important, sheet metal workers have to fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items. They are often called upon to decide on project requirements and required methods and materials, in line with blueprints and written or verbal instructions. They are expected to set up assemblies, such as flashing, pipes, tubes, heating and air conditioning ducts and down spouts, in supportive frameworks. Finally, sheet metal workers fabricate or alter parts at construction sites, using shears, hammers, punches, and drills.
Every day, sheet metal workers are expected to be able to visualize how things come together and can be organized. They need to see details at a very fine level of focus. It is also important that they prioritize information for further consideration.
It is important for sheet metal workers to maneuver completed units into position for installation, and anchor the units. They are often called upon to shape metal material over anvils or other forms, using hand tools. They also finish parts, using hacksaws, and hand, rotary, or squaring shears. They are sometimes expected to transport prefabricated parts to construction sites for assembly and installation. Somewhat less frequently, sheet metal workers are also expected to lay out and mark dimensions and reference lines on material, such as roofing panels, in line with drawings or templates, using calculators, scribes, dividers, squares, and rulers.
Sheet metal workers sometimes are asked to convert blueprints into shop drawings to be followed in the construction and assembly of sheet metal products. They also have to be able to fasten roof panel edges and machine-made molding to structures, nailing or welding pieces into position And finally, they sometimes have to fabricate or alter parts at construction sites, using shears, hammers, punches, and drills.
Like many other jobs, sheet metal workers must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Denver include:
- Steel Worker. Raise, place, and unite iron or steel girders, columns, and other structural members to form completed structures or structural frameworks. May erect metal storage tanks and assemble prefabricated metal buildings.
EDUCATIONAL OPPORTUNITIES: Sheet Metal Worker Training
Emily Griffith Opportunity School - Denver, CO
Emily Griffith Opportunity School, 1250 Welton Street, Denver, CO 80204-2197. Emily Griffith Opportunity School is a small school located in Denver, Colorado. It is a public school with primarily less-than 2-year programs and has 2,148 students. Emily Griffith Opportunity School has a less than one year program in Sheet Metal Technology/Sheetworking which graduated 161 students in 2008.
LOCATION INFORMATION: Denver, Colorado
Denver is located in Denver County, Colorado. It has a population of over 598,707, which has grown by 7.9% over the last ten years. The cost of living index in Denver, 102, is near the national average. New single-family homes in Denver are priced at $223,800 on average, which is below the state average. In 2008, eight hundred thirty-seven new homes were constructed in Denver, down from 1,215 the previous year.
The top three industries for women in Denver are health care, educational services, and professional, scientific, and technical services. For men, it is construction, professional, scientific, and technical services, and accommodation and food services. The average travel time to work is about 25 minutes. More than 34.5% of Denver residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 12.4%, is higher than the state average.
The percentage of Denver residents that are affiliated with a religious congregation, 53.0%, is more than both the national and state average. The most prominent religious groups are the Catholic Church, the American Baptist Churches in the USA and the Episcopal Church.
Denver is home to the J F Kennedy Municipal Golf Course and the North Marston Filtration Plant as well as Cheesman Park and Bear Creek Park. Shopping malls in the area include Alameda Square Shopping Center, Boulevard Shopping Center and Brentwood Plaza Shopping Center. Visitors to Denver can choose from Embassy Suites Hotel Denver Downtown, Intown Suites Aurora and Denver Marriott City Center for temporary stays in the area.