Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Numerical Control Tool Programmers in Victorville, California

There are many career and education opportunities for numerical control tool programmers in the Victorville, California area. About 1,900 people are currently employed as numerical control tool programmers in California. By 2016, this is expected to grow by 11% to about 2,100 people employed. This is better than the national trend for numerical control tool programmers, which sees this job pool shrinking by about 15.4% over the next eight years. In general, numerical control tool programmers develop programs to control machining or processing of parts by automatic machine tools, equipment, or systems.

Numerical control tool programmers earn about $25 per hour or $52,290 annually on average in California and about $21 per hour or $44,310 yearly on average nationally. Incomes for numerical control tool programmers are better than in the overall category of Computer Controls in California, and better than the overall Computer Controls category nationally.

There are two schools within twenty-five miles of Victorville where you can study to be a numerical control tool programmer, among twenty-four schools of higher education total in the Victorville area. The most common level of education for numerical control tool programmers is an Associate's, or other 2-year degree. You can expect to spend about two years training to become a numerical control tool programmer if you already have a high school diploma.

CAREER DESCRIPTION: Numerical Control Tool Programmer

Numerical Control Tool Programmer video from the State of New Jersey Dept. of Labor and Workforce Development

In general, numerical control tool programmers develop programs to control machining or processing of parts by automatic machine tools, equipment, or systems.

Numerical control tool programmers analyze job orders, drawings, blueprints, specifications, printed circuit board pattern films, and layout data so as to calculate dimensions and feed rates. They also decide on the sequence of machine operations, and decide on the proper cutting tools needed to machine workpieces into the desired shapes. Equally important, numerical control tool programmers have to modify existing programs to enhance efficiency. They are often called upon to decide on reference points, machine cutting paths, or hole locations, and compute angular and linear dimensions, radii, and curvatures. They are expected to observe machines on trial runs or conduct computer simulations to insure that programs and machinery will function properly and produce items that meet specifications. Finally, numerical control tool programmers revise programs and/or tapes to remove errors, and retest programs to check that problems have been solved.

Every day, numerical control tool programmers are expected to be able to visualize how things come together and can be organized. They need to see details at a very fine level of focus. It is also important that they imediately see the relationships between collections of numbers, images, and patterns.

It is important for numerical control tool programmers to enter computer commands to store or retrieve components patterns or programs that transfer data to other media. They are often called upon to ready geometric layouts from graphic displays, using computer-assisted drafting software or drafting instruments and graph paper. They also compare encoded tapes or computer printouts with original part specifications and blueprints to confirm precision of instructions. They are sometimes expected to enter coordinates of hole locations into program memories by depressing pedals or buttons of programmers. Somewhat less frequently, numerical control tool programmers are also expected to write instruction sheets and cutter lists for a machine's controller so as to guide setup and encode numerical control tapes.

Numerical control tool programmers sometimes are asked to draw machine tool paths on pattern film, using colored markers and following guidelines for tool speed and efficiency. and revise programs and/or tapes to remove errors, and retest programs to check that problems have been solved. And finally, they sometimes have to observe machines on trial runs or conduct computer simulations to insure that programs and machinery will function properly and produce items that meet specifications.

Like many other jobs, numerical control tool programmers must be thorough and dependable and be able to absorb the factors involved and a problem and provide a well thought out solution.

EDUCATIONAL OPPORTUNITIES: Numerical Control Tool Programmer Training

Chaffey College - Rancho Cucamonga, CA

Chaffey College, 5885 Haven Ave, Rancho Cucamonga, CA 91737-3002. Chaffey College is a large college located in Rancho Cucamonga, California. It is a public school with primarily 2-year programs and has 20,486 students. Chaffey College has a less than one year and a two to four year program in Computer Programming/Programmer which graduated one and zero students respectively in 2008.

Westwood College-Inland Empire - Upland, CA

Westwood College-Inland Empire, 20 W 7th St, Upland, CA 91786-7148. Westwood College-Inland Empire is a small college located in Upland, California. It is a private for-profit school with primarily 4-year or above programs. It has 1,080 students and an admission rate of 42%. Westwood College-Inland Empire has an associate's degree program in Computer Programming/Programmer.

LOCATION INFORMATION: Victorville, California

Victorville, California
Victorville, California photo by Sfan00_IMG

Victorville is located in San Bernardino County, California. It has a population of over 110,318, which has grown by 72.3% over the last ten years. The cost of living index in Victorville, 117, is far greater than the national average. New single-family homes in Victorville are priced at $185,500 on average, which is far less than the state average. In 2008, one hundred ninety-six new homes were constructed in Victorville, down from 1,090 the previous year.

The top three industries for women in Victorville are health care, educational services, and accommodation and food services. For men, it is construction, public administration, and truck transportation. The average commute to work is about 35 minutes. More than 10.6% of Victorville residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 3.7%, is lower than the state average.

The unemployment rate in Victorville is 16.8%, which is greater than California's average of 12.3%.

The percentage of Victorville residents that are affiliated with a religious congregation, 42.0%, is less than both the national and state average. United Pentecostal Church, Holy Faith Baptist Mission and Victor Valley Baptist Church are among the churches located in Victorville. The most prominent religious groups are the Catholic Church, the Southern Baptist Convention and the LDS (Mormon) Church.

Victorville is home to the West Wind Golf Course and the Victorville Branch San Bernardino County Library as well as Eva Dell Park and Hesp Crest Desert Ecological Study Area. Shopping centers in the area include Hi Desert Plaza Shopping Center, Bear Valley Plaza Shopping Center and Victor Valley Town Center Shopping Center. Visitors to Victorville can choose from Best Western Green Tree Inn and Budget Inn of Victorville for temporary stays in the area.