Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Heat Treating Equipment Operators in Santa Clarita, California

There are many career and education opportunities for heat treating equipment operators in the Santa Clarita, California area. About 1,300 people are currently employed as heat treating equipment operators in California. By 2016, this is expected to grow by 8% to about 1,400 people employed. This is better than the national trend for heat treating equipment operators, which sees this job pool shrinking by about 10.6% over the next eight years. Heat treating equipment operators generally set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.

Heat treating equipment operators earn approximately $15 per hour or $31,620 per year on average in California. Nationally they average about $15 per hour or $32,030 annually. Incomes for heat treating equipment operators are better than in the overall category of Foundry and Metal Work in California, and not quite as good as the overall Foundry and Metal Work category nationally.

The Santa Clarita area is home to 210 schools of higher education, including nine within twenty-five miles of Santa Clarita where you can get a degree as a heat treating equipment operator. Heat treating equipment operators usually hold a high school diploma or GED, so it will take only a short time to learn to be a heat treating equipment operator if you already have a high school diploma.

CAREER DESCRIPTION: Heat Treating Equipment Operator

In general, heat treating equipment operators set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.

Every day, heat treating equipment operators are expected to be able to respond quickly in general. They need to focus attention on specific tasks without being distracted. It is also important that they maintain precise control of objects and devices through a range of movements.

It is important for heat treating equipment operators to remove components from furnaces after specified times, and air dry or cool components in water or other baths. They are often called upon to read production schedules and work orders to establish processing sequences and heat cycle requirements for objects to be heat-treated. They also decide on types and temperatures of baths and quenching media needed to attain specified part hardness and ductility, using heat-treating charts and knowledge of methods and metals. They are sometimes expected to record times that components are removed from furnaces to document that objects have attained specified temperatures for specified times. Somewhat less frequently, heat treating equipment operators are also expected to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations.

Heat treating equipment operators sometimes are asked to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations. They also have to be able to examine components to insure metal shades and colors conform to given requirements, utilizing knowledge of metal heat-treating And finally, they sometimes have to decide on flame temperatures and induction heating coils needed, on the basis of degree of hardness required and properties of stock to be treated.

Like many other jobs, heat treating equipment operators must be reliable and be thorough and dependable.

Similar jobs with educational opportunities in Santa Clarita include:

  • Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
  • Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
  • Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
  • Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
  • Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.

EDUCATIONAL OPPORTUNITIES: Heat Treating Equipment Operator Training

Los Angeles Valley College - Valley Glen, CA

Los Angeles Valley College, 5800 Fulton Avenue, Valley Glen, CA 91401-4096. Los Angeles Valley College is a large college located in Valley Glen, California. It is a public school with primarily 2-year programs and has 18,550 students. Los Angeles Valley College has less than one year, one to two year, and associate's degree programs in Machine Tool Technology/Machinist which graduated two, one, and zero students respectively in 2008.

NTMA Training Centers of Southern California - Santa Fe Springs, CA

NTMA Training Centers of Southern California, 13230 Firestone Blvd., Unit A, Santa Fe Springs, CA 90670. NTMA Training Centers of Southern California is a small school located in Santa Fe Springs, California. It is a private not-for-profit school with primarily less-than 2-year programs. It has 286 students and an admission rate of 98%. NTMA Training Centers of Southern California has a less than one year program in Machine Tool Technology/Machinist which graduated 754 students in 2008.

Los Angeles Trade Technical College - Los Angeles, CA

Los Angeles Trade Technical College, 400 W Washington Blvd, Los Angeles, CA 90015-4181. Los Angeles Trade Technical College is a large college located in Los Angeles, California. It is a public school with primarily 2-year programs and has 15,565 students. Los Angeles Trade Technical College has a one to two year and an associate's degree program in Machine Tool Technology/Machinist which graduated five and four students respectively in 2008.

Los Angeles Pierce College - Woodland Hills, CA

Los Angeles Pierce College, 6201 Winnetka Ave, Woodland Hills, CA 91371-0002. Los Angeles Pierce College is a large college located in Woodland Hills, California. It is a public school with primarily 2-year programs and has 21,832 students. Los Angeles Pierce College has a one to two year and an associate's degree program in Machine Tool Technology/Machinist which graduated one and three students respectively in 2008.

Long Beach City College - Long Beach, CA

Long Beach City College, 4901 E. Carson St., Long Beach, CA 90808-1706. Long Beach City College is a large college located in Long Beach, California. It is a public school with primarily 2-year programs and has 26,097 students. Long Beach City College has an associate's degree and a two to four year program in Machine Tool Technology/Machinist.

Cerritos College - Norwalk, CA

Cerritos College, 11110 Alondra Blvd, Norwalk, CA 90650-6298. Cerritos College is a large college located in Norwalk, California. It is a public school with primarily 2-year programs and has 22,228 students. Cerritos College has less than one year, one to two year, associate's degree, and two to four year programs in Machine Tool Technology/Machinist which graduated eleven, two, two, and zero students respectively in 2008.

Pasadena City College - Pasadena, CA

Pasadena City College, 1570 E Colorado Blvd., Pasadena, CA 91106-2003. Pasadena City College is a large college located in Pasadena, California. It is a public school with primarily 2-year programs and has 26,453 students. Pasadena City College has an associate's degree and a two to four year program in Machine Tool Technology/Machinist.

Glendale Community College - Glendale, CA

Glendale Community College, 1500 N Verdugo Rd, Glendale, CA 91208-2894. Glendale Community College is a large college located in Glendale, California. It is a public school with primarily 2-year programs and has 15,993 students. Glendale Community College has one to two year, associate's degree, and two to four year programs in Machine Tool Technology/Machinist which graduated four, zero, and zero students respectively in 2008.

El Camino Community College District - Torrance, CA

El Camino Community College District, 16007 Crenshaw Blvd, Torrance, CA 90506. El Camino Community College District is a large college located in Torrance, California. It is a public school with primarily 2-year programs and has 26,825 students. El Camino Community College District has less than one year, one to two year, associate's degree, and two to four year programs in Machine Tool Technology/Machinist which graduated two, eight, five, and zero students respectively in 2008.

LOCATION INFORMATION: Santa Clarita, California

Santa Clarita, California
Santa Clarita, California photo by Guillaume h

Santa Clarita is situated in Los Angeles County, California. It has a population of over 169,500, which has grown by 12.2% over the last ten years. The cost of living index in Santa Clarita, 137, is far greater than the national average. New single-family homes in Santa Clarita are valued at $396,800 on average, which is far greater than the state average. In 2008, one hundred ten new homes were built in Santa Clarita, down from one hundred ninety-eight the previous year.

The three most popular industries for women in Santa Clarita are educational services, health care, and finance and insurance. For men, it is construction, professional, scientific, and technical services, and public administration. The average travel time to work is about 33 minutes. More than 29.1% of Santa Clarita residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 8.8%, is lower than the state average.

The unemployment rate in Santa Clarita is 7.8%, which is less than California's average of 12.3%.

The percentage of Santa Clarita residents that are affiliated with a religious congregation, 58.1%, is more than both the national and state average. The most common religious groups are the Catholic Church, the Southern Baptist Convention and the LDS (Mormon) Church.

Santa Clarita is home to the Monogram Ranch and the Placeritos Ranch as well as William S Hart Park and Almendra Park. Shopping centers in the area include River Oaks Shopping Center, Granary Square Shopping Center and Lyons Station Shopping Center.