Career and Education Opportunities for Sheet Metal Workers in Santa Clarita, California
Sheet metal worker career and educational opportunities abound in Santa Clarita, California. There are currently 18,700 jobs for sheet metal workers in California and this is projected to grow by 10% to about 20,500 jobs by 2016. This is better than the national trend for sheet metal workers, which sees this job pool growing by about 6.5% over the next eight years. In general, sheet metal workers fabricate, assemble, and repair sheet metal products and equipment, such as ducts, control boxes, and furnace casings.
Sheet metal workers earn approximately $23 hourly or $48,530 per year on average in California. Nationally they average about $19 hourly or $40,290 annually. Earnings for sheet metal workers are not quite as good as earnings in the general category of Metal Working and Welding in California and not quite as good as general Metal Working and Welding category earnings nationally.
There are 210 schools of higher education in the Santa Clarita area, including one within twenty-five miles of Santa Clarita where you can get a degree to start your career as a sheet metal worker. The most common level of education for sheet metal workers is a high school diploma or GED. You can expect to spend only a short time training to become a sheet metal worker if you already have a high school diploma.
CAREER DESCRIPTION: Sheet Metal Worker
In general, sheet metal workers fabricate, assemble, and repair sheet metal products and equipment, such as ducts, control boxes, and furnace casings. They also work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; inspecting, assembling, and smoothing seams and joints of burred surfaces.
Sheet metal workers drill and punch holes in metal for screws, bolts, and rivets. They also lay out and mark dimensions and reference lines on material, such as roofing panels, in line with drawings or templates, using calculators, scribes, dividers, squares, and rulers. Equally important, sheet metal workers have to fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items. They are often called upon to decide on project requirements and required methods and materials, in line with blueprints and written or verbal instructions. They are expected to set up assemblies, such as flashing, pipes, tubes, heating and air conditioning ducts and down spouts, in supportive frameworks. Finally, sheet metal workers fabricate or alter parts at construction sites, using shears, hammers, punches, and drills.
Every day, sheet metal workers are expected to be able to visualize how things come together and can be organized. They need to see details at a very fine level of focus. It is also important that they prioritize information for further consideration.
It is important for sheet metal workers to maneuver completed units into position for installation, and anchor the units. They are often called upon to shape metal material over anvils or other forms, using hand tools. They also finish parts, using hacksaws, and hand, rotary, or squaring shears. They are sometimes expected to transport prefabricated parts to construction sites for assembly and installation. Somewhat less frequently, sheet metal workers are also expected to lay out and mark dimensions and reference lines on material, such as roofing panels, in line with drawings or templates, using calculators, scribes, dividers, squares, and rulers.
Sheet metal workers sometimes are asked to convert blueprints into shop drawings to be followed in the construction and assembly of sheet metal products. They also have to be able to fasten roof panel edges and machine-made molding to structures, nailing or welding pieces into position And finally, they sometimes have to fabricate or alter parts at construction sites, using shears, hammers, punches, and drills.
Like many other jobs, sheet metal workers must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Santa Clarita include:
- Steel Worker. Raise, place, and unite iron or steel girders, columns, and other structural members to form completed structures or structural frameworks. May erect metal storage tanks and assemble prefabricated metal buildings.
EDUCATIONAL OPPORTUNITIES: Sheet Metal Worker Training
Long Beach City College - Long Beach, CA
Long Beach City College, 4901 E. Carson St., Long Beach, CA 90808-1706. Long Beach City College is a large college located in Long Beach, California. It is a public school with primarily 2-year programs and has 26,097 students. Long Beach City College has an associate's degree and a two to four year program in Sheet Metal Technology/Sheetworking.
Sheet Metal Contractor
Licensing agency: Department of Consumer Affairs
Address: Contractors State License Board, 9821 Business Park Drive, Sacramento, CA 95827
Phone: (916) 255-3900
Website: Department of Consumer Affairs Contractors State License Board
LOCATION INFORMATION: Santa Clarita, California
Santa Clarita is situated in Los Angeles County, California. It has a population of over 169,500, which has grown by 12.2% over the last ten years. The cost of living index in Santa Clarita, 137, is far greater than the national average. New single-family homes in Santa Clarita are valued at $396,800 on average, which is far greater than the state average. In 2008, one hundred ten new homes were built in Santa Clarita, down from one hundred ninety-eight the previous year.
The three most popular industries for women in Santa Clarita are educational services, health care, and finance and insurance. For men, it is construction, professional, scientific, and technical services, and public administration. The average travel time to work is about 33 minutes. More than 29.1% of Santa Clarita residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 8.8%, is lower than the state average.
The unemployment rate in Santa Clarita is 7.8%, which is less than California's average of 12.3%.
The percentage of Santa Clarita residents that are affiliated with a religious congregation, 58.1%, is more than both the national and state average. The most common religious groups are the Catholic Church, the Southern Baptist Convention and the LDS (Mormon) Church.
Santa Clarita is home to the Monogram Ranch and the Placeritos Ranch as well as William S Hart Park and Almendra Park. Shopping centers in the area include River Oaks Shopping Center, Granary Square Shopping Center and Lyons Station Shopping Center.