Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Structural and Ornamental Metalwork Metal Fabricators in Rancho Cucamonga, California

Rancho Cucamonga, California provides a wide variety of opportunities, both career and educational, for structural and ornamental metalwork metal fabricators. There are currently 8,000 working structural and ornamental metalwork metal fabricators in California; this should grow 8% to about 8,600 working structural and ornamental metalwork metal fabricators in the state by 2016. This is better than the nation as a whole, where employment opportunities for structural and ornamental metalwork metal fabricators are expected to shrink by about 0.4%. Structural and ornamental metalwork metal fabricators generally fabricate, lay out, and fit parts of structural metal products.

Income for structural and ornamental metalwork metal fabricators is about $17 per hour or $35,410 yearly on average in California. Nationally, their income is about $15 per hour or $32,400 annually. Structural and ornamental metalwork metal fabricators earn more than people working in the category of Assembling and Fabrication generally in California and more than people in the Assembling and Fabrication category nationally.

There is one school within twenty-five miles of Rancho Cucamonga where you can study to be a structural and ornamental metalwork metal fabricator, among twenty-seven schools of higher education total in the Rancho Cucamonga area. The most common level of education for structural and ornamental metalwork metal fabricators is a high school diploma or GED. You can expect to spend only a short time training to become a structural and ornamental metalwork metal fabricator if you already have a high school diploma.

CAREER DESCRIPTION: Structural and Ornamental Metalwork Metal Fabricator

Structural and Ornamental Metalwork Metal Fabricator video from the State of New Jersey Dept. of Labor and Workforce Development

In general, structural and ornamental metalwork metal fabricators fabricate, lay out, and fit parts of structural metal products.

Structural and ornamental metalwork metal fabricators position and weld components to fashion complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools. They also move components into position, manually or with hoists or cranes. Equally important, structural and ornamental metalwork metal fabricators have to lay out and examine metal stock or workpieces to be processed to insure that specifications are met. They are often called upon to verify conformance of workpieces to given requirements, using squares, rulers, and measuring tapes. They are expected to tack-weld fitted components together. Finally, structural and ornamental metalwork metal fabricators smooth workpiece edges and fix taps, tubes, and valves.

Every day, structural and ornamental metalwork metal fabricators are expected to be able to visualize how things come together and can be organized. They need to see details at a very fine level of focus. It is also important that they maintain precise control of objects and devices through a range of movements.

It is important for structural and ornamental metalwork metal fabricators to straighten warped or bent components, using sledges or bulldozers. They are often called upon to direct welders to build up low spots or short pieces with weld. They also align and fit components according to given requirements, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers. They are sometimes expected to layout and construct templates and fixtures, using hand tools. Somewhat less frequently, structural and ornamental metalwork metal fabricators are also expected to heat-treat components, using acetylene torches.

Structural and ornamental metalwork metal fabricators sometimes are asked to hammer and grind workpieces to cut and straighten metal. And finally, they sometimes have to verify conformance of workpieces to given requirements, using squares, rulers, and measuring tapes.

Like many other jobs, structural and ornamental metalwork metal fabricators must be thorough and dependable and be reliable.

Similar jobs with educational opportunities in Rancho Cucamonga include:

  • Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
  • Electrical and Electronic Equipment Assembler. Assemble or modify electrical or electronic equipment, such as computers, test equipment telemetering systems, electric motors, and batteries.
  • Electromechanical Equipment Assembler. Assemble or modify electromechanical equipment or devices, such as servomechanisms, gyros, and appliances.
  • Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

EDUCATIONAL OPPORTUNITIES: Structural and Ornamental Metalwork Metal Fabricator Training

CET-San Bernardino - San Bernardino, CA

CET-San Bernardino, 1430 Cooley Court, San Bernardino, CA 92408. CET-San Bernardino is a small school located in San Bernardino, California. It is a private not-for-profit school with primarily less-than 2-year programs and has 139 students. CET-San Bernardino has a one to two year program in Machine Shop Technology/Assistant which graduated fourteen students in 2008.

LOCATION INFORMATION: Rancho Cucamonga, California

Rancho Cucamonga, California
Rancho Cucamonga, California photo by Sfan00_IMG

Rancho Cucamonga is situated in San Bernardino County, California. It has a population of over 171,176, which has grown by 34.0% in the past ten years. The cost of living index in Rancho Cucamonga, 128, is far greater than the national average. New single-family homes in Rancho Cucamonga are valued at $207,800 on average, which is far less than the state average. In 2008, one hundred fifty-nine new homes were built in Rancho Cucamonga, down from five hundred eighty-three the previous year.

The top three industries for women in Rancho Cucamonga are educational services, health care, and finance and insurance. For men, it is construction, public administration, and educational services. The average commute to work is about 32 minutes. More than 23.3% of Rancho Cucamonga residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 7.3%, is lower than the state average.

The unemployment rate in Rancho Cucamonga is 9.2%, which is less than California's average of 12.3%.

The percentage of Rancho Cucamonga residents that are affiliated with a religious congregation, 42.0%, is less than both the national and state average. Alta Loma Christian Church, Grace Fellowship Church and The Lords House are all churches located in Rancho Cucamonga. The largest religious groups are the Catholic Church, the Southern Baptist Convention and the LDS (Mormon) Church.

Rancho Cucamonga is home to the Etiwanda Fire Station and the John Rains House as well as Victoria Groves Park and Hermosa Park. Shopping malls in the area include Alta Loma Plaza Shopping Center, Alta Loma Square Shopping Center and AltaLoma Country Village Shopping Center.