Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Buffing Machine Operators in Palmdale, California

Many educational and employment opportunities exist for buffing machine operators in the Palmdale, California area. The national trend for buffing machine operators sees this job pool shrinking by about 15.9% over the next eight years. Buffing machine operators generally set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

A person working as a buffing machine operator can expect to earn about $12 hourly or $25,410 per year on average in California and about $14 per hour or $29,460 yearly on average in the U.S. as a whole. Incomes for buffing machine operators are not quite as good as in the overall category of Foundry and Metal Work in California, and not quite as good as the overall Foundry and Metal Work category nationally.

There are 210 schools of higher education in the Palmdale area, including nine within twenty-five miles of Palmdale where you can get a degree to start your career as a buffing machine operator. Buffing machine operators usually hold a high school diploma or GED, so you can expect to spend only a short time studying to be a buffing machine operator if you already have a high school diploma.

CAREER DESCRIPTION: Buffing Machine Operator

In general, buffing machine operators set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

Buffing machine operators inspect or measure finished workpieces to establish conformance to given requirements, using measuring instruments such as gauges or micrometers. They also observe machine operations to uncover any problems; make needed adjustments to fix problems. Equally important, buffing machine operators have to activate machine start-up switches to grind or cut workpieces, according to given requirements. Finally, buffing machine operators prepare grinding tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic workpieces.

Every day, buffing machine operators are expected to be able to maintain precise control of objects and devices through a range of movements. It is also important that they respond quickly in general.

It is important for buffing machine operators to lift and position workpieces, manually or with hoists, and secure them in hoppers or on machine tables or chucks, using clamps. They are often called upon to measure workpieces and lay out work, using precision measuring devices. They also set and adjust machine controls in line with product specifications, utilizing knowledge of machine operation. They are sometimes expected to move machine controls to index workpieces, and to modify machines for pre-selected operational settings. Somewhat less frequently, buffing machine operators are also expected to adjust air cylinders and setting stops to set traverse lengths and feed arm strokes.

Buffing machine operators sometimes are asked to prepare grinding tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic workpieces. and maintain stocks of machine components and machining tools. And finally, they sometimes have to set and adjust machine controls in line with product specifications, utilizing knowledge of machine operation.

Like many other jobs, buffing machine operators must be thorough and dependable and be reliable.

Similar jobs with educational opportunities in Palmdale include:

  • Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
  • Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
  • Ophthalmic Laboratory Technician. Cut, grind, and polish eyeglasses, contact lenses, or other precision optical elements. Assemble and mount lenses into frames or process other optical elements.
  • Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
  • Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
  • Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
  • Woodworking Machine Setter and Operator. Set up, operate, or tend woodworking machines, such as drill presses, lathes, and wood nailing machines.

EDUCATIONAL OPPORTUNITIES: Buffing Machine Operator Training

Los Angeles Valley College - Valley Glen, CA

Los Angeles Valley College, 5800 Fulton Avenue, Valley Glen, CA 91401-4096. Los Angeles Valley College is a large college located in Valley Glen, California. It is a public school with primarily 2-year programs and has 18,550 students. Los Angeles Valley College has less than one year, one to two year, and associate's degree programs in Machine Tool Technology/Machinist which graduated two, one, and zero students respectively in 2008.

NTMA Training Centers of Southern California - Santa Fe Springs, CA

NTMA Training Centers of Southern California, 13230 Firestone Blvd., Unit A, Santa Fe Springs, CA 90670. NTMA Training Centers of Southern California is a small school located in Santa Fe Springs, California. It is a private not-for-profit school with primarily less-than 2-year programs. It has 286 students and an admission rate of 98%. NTMA Training Centers of Southern California has a less than one year program in Machine Tool Technology/Machinist which graduated 754 students in 2008.

Los Angeles Trade Technical College - Los Angeles, CA

Los Angeles Trade Technical College, 400 W Washington Blvd, Los Angeles, CA 90015-4181. Los Angeles Trade Technical College is a large college located in Los Angeles, California. It is a public school with primarily 2-year programs and has 15,565 students. Los Angeles Trade Technical College has a one to two year and an associate's degree program in Machine Tool Technology/Machinist which graduated five and four students respectively in 2008.

Los Angeles Pierce College - Woodland Hills, CA

Los Angeles Pierce College, 6201 Winnetka Ave, Woodland Hills, CA 91371-0002. Los Angeles Pierce College is a large college located in Woodland Hills, California. It is a public school with primarily 2-year programs and has 21,832 students. Los Angeles Pierce College has a one to two year and an associate's degree program in Machine Tool Technology/Machinist which graduated one and three students respectively in 2008.

Long Beach City College - Long Beach, CA

Long Beach City College, 4901 E. Carson St., Long Beach, CA 90808-1706. Long Beach City College is a large college located in Long Beach, California. It is a public school with primarily 2-year programs and has 26,097 students. Long Beach City College has an associate's degree and a two to four year program in Machine Tool Technology/Machinist.

Cerritos College - Norwalk, CA

Cerritos College, 11110 Alondra Blvd, Norwalk, CA 90650-6298. Cerritos College is a large college located in Norwalk, California. It is a public school with primarily 2-year programs and has 22,228 students. Cerritos College has less than one year, one to two year, associate's degree, and two to four year programs in Machine Tool Technology/Machinist which graduated eleven, two, two, and zero students respectively in 2008.

Pasadena City College - Pasadena, CA

Pasadena City College, 1570 E Colorado Blvd., Pasadena, CA 91106-2003. Pasadena City College is a large college located in Pasadena, California. It is a public school with primarily 2-year programs and has 26,453 students. Pasadena City College has an associate's degree and a two to four year program in Machine Tool Technology/Machinist.

Glendale Community College - Glendale, CA

Glendale Community College, 1500 N Verdugo Rd, Glendale, CA 91208-2894. Glendale Community College is a large college located in Glendale, California. It is a public school with primarily 2-year programs and has 15,993 students. Glendale Community College has one to two year, associate's degree, and two to four year programs in Machine Tool Technology/Machinist which graduated four, zero, and zero students respectively in 2008.

El Camino Community College District - Torrance, CA

El Camino Community College District, 16007 Crenshaw Blvd, Torrance, CA 90506. El Camino Community College District is a large college located in Torrance, California. It is a public school with primarily 2-year programs and has 26,825 students. El Camino Community College District has less than one year, one to two year, associate's degree, and two to four year programs in Machine Tool Technology/Machinist which graduated two, eight, five, and zero students respectively in 2008.

CERTIFICATIONS

Precision Sheet Metal Operator: PSMO Certification is the metal fabricating industry's first comprehensive exam designed to assess a candidate's knowledge of fundamental precision sheet metal fabrication processes in shearing, sawing, press brake, turret punch press, laser cutting, and mechanical finishing.

For more information, see the Fabricators & Manufacturers Association, International website.

LOCATION INFORMATION: Palmdale, California

Palmdale, California
Palmdale, California photo by Jamesb01

Palmdale is located in Los Angeles County, California. It has a population of over 143,197, which has grown by 22.7% in the past ten years. The cost of living index in Palmdale, 132, is far greater than the national average. New single-family homes in Palmdale are priced at $218,600 on average, which is far less than the state average. In 2008, three hundred seventy-four new homes were built in Palmdale, down from eight hundred thirty-nine the previous year.

The three big industries for women in Palmdale are health care, educational services, and accommodation and food services. For men, it is construction, transportation equipment, and accommodation and food services. The average travel time to work is about 43 minutes. More than 13.3% of Palmdale residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 3.8%, is lower than the state average.

The unemployment rate in Palmdale is 15.6%, which is greater than California's average of 12.3%.

The percentage of Palmdale residents that are affiliated with a religious congregation, 58.1%, is more than both the national and state average. The most common religious groups are the Catholic Church, the Southern Baptist Convention and the LDS (Mormon) Church.

Palmdale is home to the Ritter Ranch and the Palmdale City Library as well as McAdam Park and Tejon Park.