Career and Education Opportunities for Sheet Metal Workers in Palmdale, California
For those living in the Palmdale, California area, there are many career and education opportunities for sheet metal workers. Currently, 18,700 people work as sheet metal workers in California. This is expected to grow by 10% to about 20,500 people by 2016. This is better than the national trend for sheet metal workers, which sees this job pool growing by about 6.5% over the next eight years. In general, sheet metal workers fabricate, assemble, and repair sheet metal products and equipment, such as ducts, control boxes, and furnace casings.
Sheet metal workers earn about $23 per hour or $48,530 per year on average in California and about $19 per hour or $40,290 per year on average nationally. Earnings for sheet metal workers are not quite as good as earnings in the general category of Metal Working and Welding in California and not quite as good as general Metal Working and Welding category earnings nationally.
The Palmdale area is home to 210 schools of higher education, including one within twenty-five miles of Palmdale where you can get a degree as a sheet metal worker. Sheet metal workers usually hold a high school diploma or GED, so you can expect to spend only a short time studying to be a sheet metal worker if you already have a high school diploma.
CAREER DESCRIPTION: Sheet Metal Worker
In general, sheet metal workers fabricate, assemble, and repair sheet metal products and equipment, such as ducts, control boxes, and furnace casings. They also work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; inspecting, assembling, and smoothing seams and joints of burred surfaces.
Sheet metal workers drill and punch holes in metal for screws, bolts, and rivets. They also lay out and mark dimensions and reference lines on material, such as roofing panels, in line with drawings or templates, using calculators, scribes, dividers, squares, and rulers. Equally important, sheet metal workers have to fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items. They are often called upon to decide on project requirements and required methods and materials, in line with blueprints and written or verbal instructions. They are expected to set up assemblies, such as flashing, pipes, tubes, heating and air conditioning ducts and down spouts, in supportive frameworks. Finally, sheet metal workers fabricate or alter parts at construction sites, using shears, hammers, punches, and drills.
Every day, sheet metal workers are expected to be able to visualize how things come together and can be organized. They need to see details at a very fine level of focus. It is also important that they prioritize information for further consideration.
It is important for sheet metal workers to maneuver completed units into position for installation, and anchor the units. They are often called upon to shape metal material over anvils or other forms, using hand tools. They also finish parts, using hacksaws, and hand, rotary, or squaring shears. They are sometimes expected to transport prefabricated parts to construction sites for assembly and installation. Somewhat less frequently, sheet metal workers are also expected to lay out and mark dimensions and reference lines on material, such as roofing panels, in line with drawings or templates, using calculators, scribes, dividers, squares, and rulers.
Sheet metal workers sometimes are asked to convert blueprints into shop drawings to be followed in the construction and assembly of sheet metal products. They also have to be able to fasten roof panel edges and machine-made molding to structures, nailing or welding pieces into position And finally, they sometimes have to fabricate or alter parts at construction sites, using shears, hammers, punches, and drills.
Like many other jobs, sheet metal workers must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Palmdale include:
- Steel Worker. Raise, place, and unite iron or steel girders, columns, and other structural members to form completed structures or structural frameworks. May erect metal storage tanks and assemble prefabricated metal buildings.
EDUCATIONAL OPPORTUNITIES: Sheet Metal Worker Training
Long Beach City College - Long Beach, CA
Long Beach City College, 4901 E. Carson St., Long Beach, CA 90808-1706. Long Beach City College is a large college located in Long Beach, California. It is a public school with primarily 2-year programs and has 26,097 students. Long Beach City College has an associate's degree and a two to four year program in Sheet Metal Technology/Sheetworking.
Sheet Metal Contractor
Licensing agency: Department of Consumer Affairs
Address: Contractors State License Board, 9821 Business Park Drive, Sacramento, CA 95827
Phone: (916) 255-3900
Website: Department of Consumer Affairs Contractors State License Board
LOCATION INFORMATION: Palmdale, California
Palmdale is located in Los Angeles County, California. It has a population of over 143,197, which has grown by 22.7% in the past ten years. The cost of living index in Palmdale, 132, is far greater than the national average. New single-family homes in Palmdale are priced at $218,600 on average, which is far less than the state average. In 2008, three hundred seventy-four new homes were built in Palmdale, down from eight hundred thirty-nine the previous year.
The three big industries for women in Palmdale are health care, educational services, and accommodation and food services. For men, it is construction, transportation equipment, and accommodation and food services. The average travel time to work is about 43 minutes. More than 13.3% of Palmdale residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 3.8%, is lower than the state average.
The unemployment rate in Palmdale is 15.6%, which is greater than California's average of 12.3%.
The percentage of Palmdale residents that are affiliated with a religious congregation, 58.1%, is more than both the national and state average. The most common religious groups are the Catholic Church, the Southern Baptist Convention and the LDS (Mormon) Church.
Palmdale is home to the Ritter Ranch and the Palmdale City Library as well as McAdam Park and Tejon Park.