Career and Education Opportunities for Sheet Metal Workers in Orange, California
Sheet metal workers can find both educational opportunities and jobs in the Orange, California area. There are currently 18,700 working sheet metal workers in California; this should grow 10% to 20,500 working sheet metal workers in the state by 2016. This is better than the nation as a whole, where employment opportunities for sheet metal workers are expected to grow by about 6.5%. In general, sheet metal workers fabricate, assemble, and repair sheet metal products and equipment, such as ducts, control boxes, and furnace casings.
A person working as a sheet metal worker can expect to earn about $23 per hour or $48,530 annually on average in California and about $19 hourly or $40,290 annually on average in the U.S. as a whole. Incomes for sheet metal workers are not quite as good as in the overall category of Metal Working and Welding in California, and not quite as good as the overall Metal Working and Welding category nationally.
There are ninety-two schools of higher education in the Orange area, including one within twenty-five miles of Orange where you can get a degree to start your career as a sheet metal worker. Given that the most common education level for sheet metal workers is a high school diploma or GED, you can expect to spend only a short time studying to be a sheet metal worker if you already have a high school diploma.
CAREER DESCRIPTION: Sheet Metal Worker
In general, sheet metal workers fabricate, assemble, and repair sheet metal products and equipment, such as ducts, control boxes, and furnace casings. They also work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; inspecting, assembling, and smoothing seams and joints of burred surfaces.
Sheet metal workers drill and punch holes in metal for screws, bolts, and rivets. They also lay out and mark dimensions and reference lines on material, such as roofing panels, in line with drawings or templates, using calculators, scribes, dividers, squares, and rulers. Equally important, sheet metal workers have to fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items. They are often called upon to decide on project requirements and required methods and materials, in line with blueprints and written or verbal instructions. They are expected to set up assemblies, such as flashing, pipes, tubes, heating and air conditioning ducts and down spouts, in supportive frameworks. Finally, sheet metal workers fabricate or alter parts at construction sites, using shears, hammers, punches, and drills.
Every day, sheet metal workers are expected to be able to visualize how things come together and can be organized. They need to see details at a very fine level of focus. It is also important that they prioritize information for further consideration.
It is important for sheet metal workers to maneuver completed units into position for installation, and anchor the units. They are often called upon to shape metal material over anvils or other forms, using hand tools. They also finish parts, using hacksaws, and hand, rotary, or squaring shears. They are sometimes expected to transport prefabricated parts to construction sites for assembly and installation. Somewhat less frequently, sheet metal workers are also expected to lay out and mark dimensions and reference lines on material, such as roofing panels, in line with drawings or templates, using calculators, scribes, dividers, squares, and rulers.
Sheet metal workers sometimes are asked to convert blueprints into shop drawings to be followed in the construction and assembly of sheet metal products. They also have to be able to fasten roof panel edges and machine-made molding to structures, nailing or welding pieces into position And finally, they sometimes have to fabricate or alter parts at construction sites, using shears, hammers, punches, and drills.
Like many other jobs, sheet metal workers must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Orange include:
- Steel Worker. Raise, place, and unite iron or steel girders, columns, and other structural members to form completed structures or structural frameworks. May erect metal storage tanks and assemble prefabricated metal buildings.
EDUCATIONAL OPPORTUNITIES: Sheet Metal Worker Training
Long Beach City College - Long Beach, CA
Long Beach City College, 4901 E. Carson St., Long Beach, CA 90808-1706. Long Beach City College is a large college located in Long Beach, California. It is a public school with primarily 2-year programs and has 26,097 students. Long Beach City College has an associate's degree and a two to four year program in Sheet Metal Technology/Sheetworking.
Sheet Metal Contractor
Licensing agency: Department of Consumer Affairs
Address: Contractors State License Board, 9821 Business Park Drive, Sacramento, CA 95827
Phone: (916) 255-3900
Website: Department of Consumer Affairs Contractors State License Board
LOCATION INFORMATION: Orange, California
Orange is located in Orange County, California. It has a population of over 136,392, which has grown by 5.9% over the last ten years. The cost of living index in Orange, 134, is far greater than the national average. New single-family homes in Orange are priced at $136,300 on average, which is far less than the state average. In 2008, ninety-nine new homes were built in Orange, down from two hundred sixty-two the previous year.
The three most popular industries for women in Orange are health care, educational services, and professional, scientific, and technical services. For men, it is construction, professional, scientific, and technical services, and accommodation and food services. The average commute to work is about 25 minutes. More than 28.0% of Orange residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 9.5%, is higher than the state average.
The unemployment rate in Orange is 8.9%, which is less than California's average of 12.3%.
The percentage of Orange residents that are affiliated with a religious congregation, 44.8%, is less than the national average but more than the state average. The most common religious groups are the Catholic Church, the LDS (Mormon) Church and the Charismatic Churches Independent.
Orange is home to the El Modena Branch Orange Public Library and the Santiago Golf Course as well as Plaza Historic District and Santiago Oaks Regional Park. Shopping malls in the area include Village Plaza Shopping Center, Villa Park Town Center Shopping Center and Mall of Orange Shopping Center. Visitors to Orange can choose from Anaheim-Days Inn Orange, 7 Crowns Motel and American Inn & Suites for temporary stays in the area.