Career and Education Opportunities for Layout Technicians in Ontario, California
Layout technicians can find both educational opportunities and jobs in the Ontario, California area. The national trend for layout technicians sees this job pool shrinking by about 11.6% over the next eight years. In general, layout technicians lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing.
The income of a layout technician is about $13 hourly or $27,990 annually on average in California. In the U.S. as a whole, their income is about $16 hourly or $34,920 per year on average. Incomes for layout technicians are not quite as good as in the overall category of Foundry and Metal Work in California, and better than the overall Foundry and Metal Work category nationally.
There is one school within twenty-five miles of Ontario where you can study to be a layout technician, among twenty-two schools of higher education total in the Ontario area. The most common level of education for layout technicians is a high school diploma or GED. You can expect to spend only a short time training to become a layout technician if you already have a high school diploma.
CAREER DESCRIPTION: Layout Technician
In general, layout technicians lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. They also includes shipfitters.
Layout technicians fit and align fabricated components to be welded or assembled. They also lift and position workpieces in relation to surface plates, manually or with hoists. Equally important, layout technicians have to lay out and fabricate metal structural components such as plates and frames. Finally, layout technicians mark curves and welding symbols onto workpieces, using scribes, soapstones, punches, and hand drills.
Every day, layout technicians are expected to be able to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for layout technicians to locate center lines and verify template positions, using measuring instruments such as gauge blocks and dial indicators. They are often called upon to compute layout dimensions, and decide on and mark reference points on metal stock or workpieces for further processing, such as welding and assembly. They also formulate and develop layouts from blueprints and templates, applying knowledge of trigonometry, layout, effects of heat, and properties of metals. They are sometimes expected to formulate locations and sequences of cutting and welding operations, using compasses and rules. Somewhat less frequently, layout technicians are also expected to add dimensional details to blueprints or drawings made by other staff.
Layout technicians sometimes are asked to add dimensional details to blueprints or drawings made by other staff. And finally, they sometimes have to formulate and develop layouts from blueprints and templates, applying knowledge of trigonometry, layout, effects of heat, and properties of metals.
Like many other jobs, layout technicians must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Ontario include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Layout Technician Training
CET-San Bernardino - San Bernardino, CA
CET-San Bernardino, 1430 Cooley Court, San Bernardino, CA 92408. CET-San Bernardino is a small school located in San Bernardino, California. It is a private not-for-profit school with primarily less-than 2-year programs and has 139 students. CET-San Bernardino has 2 areas of study related to Layout Technician. They are:
- Machine Tool Technology/Machinist, less than one year which graduated 2 students in 2008.
- Machine Shop Technology/Assistant, one to two year which graduated 14 students in 2008.
LOCATION INFORMATION: Ontario, California
Ontario is situated in San Bernardino County, California. It has a population of over 171,691, which has grown by 8.7% over the last ten years. The cost of living index in Ontario, 127, is far greater than the national average. New single-family homes in Ontario are priced at $164,100 on average, which is far less than the state average. In 2008, eight new homes were constructed in Ontario, down from three hundred seven the previous year.
The three most popular industries for women in Ontario are health care, educational services, and accommodation and food services. For men, it is construction, administrative and support and waste management services, and accommodation and food services. The average commute to work is about 31 minutes. More than 10.5% of Ontario residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 2.7%, is lower than the state average.
The unemployment rate in Ontario is 14.9%, which is greater than California's average of 12.3%.
The percentage of Ontario residents that are affiliated with a religious congregation, 42.0%, is less than both the national and state average. Kingdom Hall of Jehovahs Witnesses, Country Church of Ontario and Grace Missionary Baptist Church are all churches located in Ontario. The most prominent religious groups are the Catholic Church, the Southern Baptist Convention and the LDS (Mormon) Church.
Ontario is home to the Ontario Motor Speedway and the West End Multi-Service Center as well as Del Rancho Park and Unity Park. Shopping malls in the area include Galvin Park Shopping Center, Vineyard Freeway Shopping Center and Ontario Vineyard Marketplace Shopping Center. Visitors to Ontario can choose from Best Western Ontario, Best Western Ontario Airport and Amerisuites Ontario Mills for temporary stays in the area.