Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Structural and Ornamental Metalwork Metal Fabricators in Ontario, California

If you want to be a structural and ornamental metalwork metal fabricator, the Ontario, California area offers many opportunities both for education and employment. There are currently 8,000 working structural and ornamental metalwork metal fabricators in California; this should grow by 8% to about 8,600 working structural and ornamental metalwork metal fabricators in the state by 2016. This is better than the national trend for structural and ornamental metalwork metal fabricators, which sees this job pool shrinking by about 0.4% over the next eight years. Structural and ornamental metalwork metal fabricators generally fabricate, lay out, and fit parts of structural metal products.

A person working as a structural and ornamental metalwork metal fabricator can expect to earn about $17 per hour or $35,410 yearly on average in California and about $15 hourly or $32,400 annually on average in the U.S. as a whole. Structural and ornamental metalwork metal fabricators earn more than people working in the category of Assembling and Fabrication generally in California and more than people in the Assembling and Fabrication category nationally.

The Ontario area is home to twenty-two schools of higher education, including one within twenty-five miles of Ontario where you can get a degree as a structural and ornamental metalwork metal fabricator. Structural and ornamental metalwork metal fabricators usually hold a high school diploma or GED, so it will take only a short time to learn to be a structural and ornamental metalwork metal fabricator if you already have a high school diploma.

CAREER DESCRIPTION: Structural and Ornamental Metalwork Metal Fabricator

Structural and Ornamental Metalwork Metal Fabricator video from the State of New Jersey Dept. of Labor and Workforce Development

In general, structural and ornamental metalwork metal fabricators fabricate, lay out, and fit parts of structural metal products.

Structural and ornamental metalwork metal fabricators position and weld components to fashion complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools. They also move components into position, manually or with hoists or cranes. Equally important, structural and ornamental metalwork metal fabricators have to lay out and examine metal stock or workpieces to be processed to insure that specifications are met. They are often called upon to verify conformance of workpieces to given requirements, using squares, rulers, and measuring tapes. They are expected to tack-weld fitted components together. Finally, structural and ornamental metalwork metal fabricators smooth workpiece edges and fix taps, tubes, and valves.

Every day, structural and ornamental metalwork metal fabricators are expected to be able to visualize how things come together and can be organized. They need to see details at a very fine level of focus. It is also important that they maintain precise control of objects and devices through a range of movements.

It is important for structural and ornamental metalwork metal fabricators to straighten warped or bent components, using sledges or bulldozers. They are often called upon to direct welders to build up low spots or short pieces with weld. They also align and fit components according to given requirements, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers. They are sometimes expected to layout and construct templates and fixtures, using hand tools. Somewhat less frequently, structural and ornamental metalwork metal fabricators are also expected to heat-treat components, using acetylene torches.

Structural and ornamental metalwork metal fabricators sometimes are asked to hammer and grind workpieces to cut and straighten metal. And finally, they sometimes have to verify conformance of workpieces to given requirements, using squares, rulers, and measuring tapes.

Like many other jobs, structural and ornamental metalwork metal fabricators must be thorough and dependable and be reliable.

Similar jobs with educational opportunities in Ontario include:

  • Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
  • Electrical and Electronic Equipment Assembler. Assemble or modify electrical or electronic equipment, such as computers, test equipment telemetering systems, electric motors, and batteries.
  • Electromechanical Equipment Assembler. Assemble or modify electromechanical equipment or devices, such as servomechanisms, gyros, and appliances.
  • Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

EDUCATIONAL OPPORTUNITIES: Structural and Ornamental Metalwork Metal Fabricator Training

CET-San Bernardino - San Bernardino, CA

CET-San Bernardino, 1430 Cooley Court, San Bernardino, CA 92408. CET-San Bernardino is a small school located in San Bernardino, California. It is a private not-for-profit school with primarily less-than 2-year programs and has 139 students. CET-San Bernardino has a one to two year program in Machine Shop Technology/Assistant which graduated fourteen students in 2008.

LOCATION INFORMATION: Ontario, California

Ontario, California
Ontario, California photo by Sfan00_IMG

Ontario is situated in San Bernardino County, California. It has a population of over 171,691, which has grown by 8.7% over the last ten years. The cost of living index in Ontario, 127, is far greater than the national average. New single-family homes in Ontario are priced at $164,100 on average, which is far less than the state average. In 2008, eight new homes were constructed in Ontario, down from three hundred seven the previous year.

The three most popular industries for women in Ontario are health care, educational services, and accommodation and food services. For men, it is construction, administrative and support and waste management services, and accommodation and food services. The average commute to work is about 31 minutes. More than 10.5% of Ontario residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 2.7%, is lower than the state average.

The unemployment rate in Ontario is 14.9%, which is greater than California's average of 12.3%.

The percentage of Ontario residents that are affiliated with a religious congregation, 42.0%, is less than both the national and state average. Kingdom Hall of Jehovahs Witnesses, Country Church of Ontario and Grace Missionary Baptist Church are all churches located in Ontario. The most prominent religious groups are the Catholic Church, the Southern Baptist Convention and the LDS (Mormon) Church.

Ontario is home to the Ontario Motor Speedway and the West End Multi-Service Center as well as Del Rancho Park and Unity Park. Shopping malls in the area include Galvin Park Shopping Center, Vineyard Freeway Shopping Center and Ontario Vineyard Marketplace Shopping Center. Visitors to Ontario can choose from Best Western Ontario, Best Western Ontario Airport and Amerisuites Ontario Mills for temporary stays in the area.