Career and Education Opportunities for Sheet Metal Workers in Oceanside, California
If you want to be a sheet metal worker, the Oceanside, California area offers many opportunities both for education and employment. About 18,700 people are currently employed as sheet metal workers in California. By 2016, this is expected to grow 10% to 20,500 people employed. This is better than the nation as a whole, where employment opportunities for sheet metal workers are expected to grow by about 6.5%. In general, sheet metal workers fabricate, assemble, and repair sheet metal products and equipment, such as ducts, control boxes, and furnace casings.
Income for sheet metal workers is about $23 hourly or $48,530 annually on average in California. Nationally, their income is about $19 per hour or $40,290 annually. Incomes for sheet metal workers are not quite as good as in the overall category of Metal Working and Welding in California, and not quite as good as the overall Metal Working and Welding category nationally.
The Oceanside area is home to fifty-seven schools of higher education, including two within twenty-five miles of Oceanside where you can get a degree as a sheet metal worker. Sheet metal workers usually hold a high school diploma or GED, so you can expect to spend only a short time training to become a sheet metal worker if you already have a high school diploma.
CAREER DESCRIPTION: Sheet Metal Worker
In general, sheet metal workers fabricate, assemble, and repair sheet metal products and equipment, such as ducts, control boxes, and furnace casings. They also work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; inspecting, assembling, and smoothing seams and joints of burred surfaces.
Sheet metal workers drill and punch holes in metal for screws, bolts, and rivets. They also lay out and mark dimensions and reference lines on material, such as roofing panels, in line with drawings or templates, using calculators, scribes, dividers, squares, and rulers. Equally important, sheet metal workers have to fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items. They are often called upon to decide on project requirements and required methods and materials, in line with blueprints and written or verbal instructions. They are expected to set up assemblies, such as flashing, pipes, tubes, heating and air conditioning ducts and down spouts, in supportive frameworks. Finally, sheet metal workers fabricate or alter parts at construction sites, using shears, hammers, punches, and drills.
Every day, sheet metal workers are expected to be able to visualize how things come together and can be organized. They need to see details at a very fine level of focus. It is also important that they prioritize information for further consideration.
It is important for sheet metal workers to maneuver completed units into position for installation, and anchor the units. They are often called upon to shape metal material over anvils or other forms, using hand tools. They also finish parts, using hacksaws, and hand, rotary, or squaring shears. They are sometimes expected to transport prefabricated parts to construction sites for assembly and installation. Somewhat less frequently, sheet metal workers are also expected to lay out and mark dimensions and reference lines on material, such as roofing panels, in line with drawings or templates, using calculators, scribes, dividers, squares, and rulers.
Sheet metal workers sometimes are asked to convert blueprints into shop drawings to be followed in the construction and assembly of sheet metal products. They also have to be able to fasten roof panel edges and machine-made molding to structures, nailing or welding pieces into position And finally, they sometimes have to fabricate or alter parts at construction sites, using shears, hammers, punches, and drills.
Like many other jobs, sheet metal workers must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Oceanside include:
- Steel Worker. Raise, place, and unite iron or steel girders, columns, and other structural members to form completed structures or structural frameworks. May erect metal storage tanks and assemble prefabricated metal buildings.
EDUCATIONAL OPPORTUNITIES: Sheet Metal Worker Training
Palomar College - San Marcos, CA
Palomar College, 1140 W. Mission, San Marcos, CA 92069-1487. Palomar College is a large college located in San Marcos, California. It is a public school with primarily 2-year programs and has 28,093 students. Palomar College has one to two year, associate's degree, and two to four year programs in Sheet Metal Technology/Sheetworking which graduated sixteen, zero, and zero students respectively in 2008.
San Diego City College - San Diego, CA
San Diego City College, 1313 Park Boulevard, San Diego, CA 92101-4787. San Diego City College is a large college located in San Diego, California. It is a public school with primarily 2-year programs and has 17,372 students. San Diego City College has a less than one year and an associate's degree program in Sheet Metal Technology/Sheetworking which graduated one and zero students respectively in 2008.
Sheet Metal Contractor
Licensing agency: Department of Consumer Affairs
Address: Contractors State License Board, 9821 Business Park Drive, Sacramento, CA 95827
Phone: (916) 255-3900
Website: Department of Consumer Affairs Contractors State License Board
LOCATION INFORMATION: Oceanside, California
Oceanside is situated in San Diego County, California. It has a population of over 169,684, which has grown by 5.4% in the past ten years. The cost of living index in Oceanside, 136, is far greater than the national average. New single-family homes in Oceanside are valued at $388,600 on average, which is far greater than the state average. In 2008, fifty-two new homes were constructed in Oceanside, down from one hundred forty-nine the previous year.
The three most popular industries for women in Oceanside are health care, educational services, and accommodation and food services. For men, it is construction, accommodation and food services, and public administration. The average travel time to work is about 29 minutes. More than 22.2% of Oceanside residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 7.3%, is lower than the state average.
The unemployment rate in Oceanside is 10.0%, which is less than California's average of 12.3%.
The percentage of Oceanside residents that are affiliated with a religious congregation, 43.7%, is less than both the national and state average. King of Kins Lutheran Church, Temple Solel and Temple Juda are some of the churches located in Oceanside. The most prominent religious groups are the Catholic Church, the LDS (Mormon) Church and the Southern Baptist Convention.
Oceanside is home to the Oceanside Community Center and the Oceanside-Carlsbad Country Club as well as Heritage Village Park and Libby Lake City Park. Shopping centers in the area include Fire Mountain Shopping Center, Rancho del Oro Plaza Shopping Center and Best Plaza Shopping Center. Visitors to Oceanside can choose from Beachwood Motel, Best Western Oceanside Inn and Best Western - Oceanside Inn for temporary stays in the area.