Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Heat Treating Equipment Operators in Irvine, California

Heat treating equipment operator career and educational opportunities abound in Irvine, California. About 1,300 people are currently employed as heat treating equipment operators in California. By 2016, this is expected to grow by 8% to 1,400 people employed. This is better than the nation as a whole, where employment opportunities for heat treating equipment operators are expected to shrink by about 10.6%. In general, heat treating equipment operators set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.

Heat treating equipment operators earn approximately $15 per hour or $31,620 annually on average in California. Nationally they average about $15 hourly or $32,030 yearly. Incomes for heat treating equipment operators are better than in the overall category of Foundry and Metal Work in California, and not quite as good as the overall Foundry and Metal Work category nationally.

There are 112 schools of higher education in the Irvine area, including seven within twenty-five miles of Irvine where you can get a degree to start your career as a heat treating equipment operator. Given that the most common education level for heat treating equipment operators is a high school diploma or GED, it will take only a short time to learn to be a heat treating equipment operator if you already have a high school diploma.

CAREER DESCRIPTION: Heat Treating Equipment Operator

In general, heat treating equipment operators set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.

Every day, heat treating equipment operators are expected to be able to respond quickly in general. They need to focus attention on specific tasks without being distracted. It is also important that they maintain precise control of objects and devices through a range of movements.

It is important for heat treating equipment operators to remove components from furnaces after specified times, and air dry or cool components in water or other baths. They are often called upon to read production schedules and work orders to establish processing sequences and heat cycle requirements for objects to be heat-treated. They also decide on types and temperatures of baths and quenching media needed to attain specified part hardness and ductility, using heat-treating charts and knowledge of methods and metals. They are sometimes expected to record times that components are removed from furnaces to document that objects have attained specified temperatures for specified times. Somewhat less frequently, heat treating equipment operators are also expected to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations.

Heat treating equipment operators sometimes are asked to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations. They also have to be able to examine components to insure metal shades and colors conform to given requirements, utilizing knowledge of metal heat-treating And finally, they sometimes have to decide on flame temperatures and induction heating coils needed, on the basis of degree of hardness required and properties of stock to be treated.

Like many other jobs, heat treating equipment operators must be reliable and be thorough and dependable.

Similar jobs with educational opportunities in Irvine include:

  • Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
  • Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
  • Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
  • Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
  • Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.

EDUCATIONAL OPPORTUNITIES: Heat Treating Equipment Operator Training

California Career School - Anaheim, CA

California Career School, 1100 Technology Cir, Anaheim, CA 92805. California Career School is a small school located in Anaheim, California. It is a private for-profit school with primarily less-than 2-year programs and has 350 students. California Career School has a less than one year program in Machine Tool Technology/Machinist which graduated six students in 2008.

NTMA Training Centers of Southern California - Santa Fe Springs, CA

NTMA Training Centers of Southern California, 13230 Firestone Blvd., Unit A, Santa Fe Springs, CA 90670. NTMA Training Centers of Southern California is a small school located in Santa Fe Springs, California. It is a private not-for-profit school with primarily less-than 2-year programs. It has 286 students and an admission rate of 98%. NTMA Training Centers of Southern California has a less than one year program in Machine Tool Technology/Machinist which graduated 754 students in 2008.

Fullerton College - Fullerton, CA

Fullerton College, 321 E Chapman Avenue, Fullerton, CA 92832-2095. Fullerton College is a large college located in Fullerton, California. It is a public school with primarily 2-year programs and has 22,500 students. Fullerton College has less than one year, one to two year, and two to four year programs in Machine Tool Technology/Machinist which graduated six, two, and zero students respectively in 2008.

Long Beach City College - Long Beach, CA

Long Beach City College, 4901 E. Carson St., Long Beach, CA 90808-1706. Long Beach City College is a large college located in Long Beach, California. It is a public school with primarily 2-year programs and has 26,097 students. Long Beach City College has an associate's degree and a two to four year program in Machine Tool Technology/Machinist.

Cerritos College - Norwalk, CA

Cerritos College, 11110 Alondra Blvd, Norwalk, CA 90650-6298. Cerritos College is a large college located in Norwalk, California. It is a public school with primarily 2-year programs and has 22,228 students. Cerritos College has less than one year, one to two year, associate's degree, and two to four year programs in Machine Tool Technology/Machinist which graduated eleven, two, two, and zero students respectively in 2008.

Santa Ana College - Santa Ana, CA

Santa Ana College, 1530 W. 17th Street, Santa Ana, CA 92706-3398. Santa Ana College is a large college located in Santa Ana, California. It is a public school with primarily 2-year programs and has 26,464 students. Santa Ana College has one to two year, associate's degree, and two to four year programs in Machine Tool Technology/Machinist which graduated sixteen, four, and zero students respectively in 2008.

Orange Coast College - Costa Mesa, CA

Orange Coast College, 2701 Fairview Road, Costa Mesa, CA 92628-5005. Orange Coast College is a large college located in Costa Mesa, California. It is a public school with primarily 2-year programs and has 24,700 students. Orange Coast College has less than one year, one to two year, associate's degree, and two to four year programs in Machine Tool Technology/Machinist which graduated eight, five, one, and zero students respectively in 2008.

LOCATION INFORMATION: Irvine, California

Irvine, California
Irvine, California photo by SoCal L.A.

Irvine is situated in Orange County, California. It has a population of over 207,500, which has grown by 45.0% over the last ten years. The cost of living index in Irvine, 136, is far greater than the national average. New single-family homes in Irvine are valued at $283,000 on average, which is below the state average. In 2008, one hundred twenty-five new homes were built in Irvine, down from two hundred twenty-nine the previous year.

The three big industries for women in Irvine are educational services, professional, scientific, and technical services, and health care. For men, it is professional, scientific, and technical services, educational services, and computer and electronic products. The average travel time to work is about 23 minutes. More than 58.4% of Irvine residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 24.2%, is higher than the state average.

The unemployment rate in Irvine is 7.3%, which is less than California's average of 12.3%.

The percentage of Irvine residents that are affiliated with a religious congregation, 44.8%, is less than the national average but more than the state average. The most common religious groups are the Catholic Church, the LDS (Mormon) Church and the Charismatic Churches Independent.

Irvine is home to the International Raceway and the Heritage Park Library as well as Heritage Park and Alderwood Park. Shopping centers in the area include Heritage Plaza Shopping Center, Alton Square Shopping Center and Arbor Village Shopping Center. Visitors to Irvine can choose from Atrium Hotel At Orange County Airport and Amerilodge Electronics for temporary stays in the area.