Career and Education Opportunities for Layout Technicians in Antioch, California
There is a wide variety of career and education opportunities for layout technicians in the Antioch, California area. The national trend for layout technicians sees this job pool shrinking by about 11.6% over the next eight years. In general, layout technicians lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing.
A person working as a layout technician can expect to earn about $13 hourly or $27,990 yearly on average in California and about $16 per hour or $34,920 annually on average in the U.S. as a whole. Incomes for layout technicians are not quite as good as in the overall category of Foundry and Metal Work in California, and better than the overall Foundry and Metal Work category nationally.
The Antioch area is home to sixty-four schools of higher education, including four within twenty-five miles of Antioch where you can get a degree as a layout technician. The most common level of education for layout technicians is a high school diploma or GED. It will take only a short time to learn to be a layout technician if you already have a high school diploma.
CAREER DESCRIPTION: Layout Technician
In general, layout technicians lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. They also includes shipfitters.
Layout technicians fit and align fabricated components to be welded or assembled. They also lift and position workpieces in relation to surface plates, manually or with hoists. Equally important, layout technicians have to lay out and fabricate metal structural components such as plates and frames. Finally, layout technicians mark curves and welding symbols onto workpieces, using scribes, soapstones, punches, and hand drills.
Every day, layout technicians are expected to be able to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for layout technicians to locate center lines and verify template positions, using measuring instruments such as gauge blocks and dial indicators. They are often called upon to compute layout dimensions, and decide on and mark reference points on metal stock or workpieces for further processing, such as welding and assembly. They also formulate and develop layouts from blueprints and templates, applying knowledge of trigonometry, layout, effects of heat, and properties of metals. They are sometimes expected to formulate locations and sequences of cutting and welding operations, using compasses and rules. Somewhat less frequently, layout technicians are also expected to add dimensional details to blueprints or drawings made by other staff.
Layout technicians sometimes are asked to add dimensional details to blueprints or drawings made by other staff. And finally, they sometimes have to formulate and develop layouts from blueprints and templates, applying knowledge of trigonometry, layout, effects of heat, and properties of metals.
Like many other jobs, layout technicians must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Antioch include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Layout Technician Training
Chabot College - Hayward, CA
Chabot College, 25555 Hesperian Blvd, Hayward, CA 94545. Chabot College is a large college located in Hayward, California. It is a public school with primarily 2-year programs and has 14,299 students. Chabot College has less than one year, one to two year, associate's degree, and two to four year programs in Machine Tool Technology/Machinist which graduated five, eight, four, and zero students respectively in 2008.
Diablo Valley College - Pleasant Hill, CA
Diablo Valley College, 321 Golf Club Rd, Pleasant Hill, CA 94523. Diablo Valley College is a large college located in Pleasant Hill, California. It is a public school with primarily 2-year programs and has 19,768 students. Diablo Valley College has a two to four year program in Machine Tool Technology/Machinist.
San Joaquin Delta College - Stockton, CA
San Joaquin Delta College, 5151 Pacific Ave, Stockton, CA 95207. San Joaquin Delta College is a large college located in Stockton, California. It is a public school with primarily 2-year programs and has 20,480 students. San Joaquin Delta College has a one to two year and a two to four year program in Machine Tool Technology/Machinist which graduated three and zero students respectively in 2008.
Laney College - Oakland, CA
Laney College, 900 Fallon St, Oakland, CA 94607. Laney College is a large college located in Oakland, California. It is a public school with primarily 2-year programs and has 13,104 students. Laney College has one to two year, associate's degree, and two to four year programs in Machine Tool Technology/Machinist which graduated two, one, and zero students respectively in 2008.
LOCATION INFORMATION: Antioch, California
Antioch is located in Contra Costa County, California. It has a population of over 100,219, which has grown by 10.7% in the past ten years. The cost of living index in Antioch, 150, is far greater than the national average. New single-family homes in Antioch cost $255,600 on average, which is well below the state average. In 2008, one hundred twenty-two new homes were constructed in Antioch, down from one hundred fifty-eight the previous year.
The three big industries for women in Antioch are health care, finance and insurance, and educational services. For men, it is construction, administrative and support and waste management services, and professional, scientific, and technical services. The average travel time to work is about 42 minutes. More than 18.2% of Antioch residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 4.6%, is lower than the state average.
The unemployment rate in Antioch is 12.9%, which is greater than California's average of 12.3%.
The percentage of Antioch residents that are affiliated with a religious congregation, 38.9%, is less than both the national and state average. Iglesia Biblica Bautista Antioquia, Lone Tree Community Church and Calvary Chapel are all churches located in Antioch. The most prominent religious groups are the Catholic Church, the Baptist General Conference and the LDS (Mormon) Church.
Antioch is home to the Antioch Historical Center and the Lupine Rock Picnic Area as well as Williamson Ranch Park and Fairview Park. Shopping malls in the area include Antioch Square Shopping Center, Raleys Shopping Center and Century Plaza Shopping Center. Visitors to Antioch can choose from Antioch Executive Inn, Best Western Heritage Inn Antioch and Antioch Comfort Suites for temporary stays in the area.