Career and Education Opportunities for Mechanical Engineering Technicians in Little Rock, Arkansas
There are many career and education opportunities for mechanical engineering technicians in the Little Rock, Arkansas area. The national trend for mechanical engineering technicians sees this job pool shrinking by about 1.4% over the next eight years. In general, mechanical engineering technicians apply theory and principles of mechanical engineering to modify, develop, and test machinery and equipment under direction of engineering staff or physical scientists.
A person working as a mechanical engineering technician can expect to earn about $18 hourly or $38,820 per year on average in Arkansas and about $23 per hour or $48,130 annually on average in the U.S. as a whole. Incomes for mechanical engineering technicians are not quite as good as in the overall category of Engineering Technologies in Arkansas, and not quite as good as the overall Engineering Technologies category nationally. Mechanical engineering technicians work in a variety of jobs, including: brinell tester, finite element analysis modeling specialist , and machinist.
There is one school within twenty-five miles of Little Rock where you can study to be a mechanical engineering technician, among twenty-five schools of higher education total in the Little Rock area. Given that the most common education level for mechanical engineering technicians is a high school diploma or GED, you can expect to spend only a short time training to become a mechanical engineering technician if you already have a high school diploma.
CAREER DESCRIPTION: Mechanical Engineering Technician
In general, mechanical engineering technicians apply theory and principles of mechanical engineering to modify, develop, and test machinery and equipment under direction of engineering staff or physical scientists.
Mechanical engineering technicians inspect project instructions and specifications to pinpoint, modify and plan requirements. They also consider changes in layouts, method of manufacture and assembly, and drafting techniques with staff and then direct corrections. Finally, mechanical engineering technicians inspect project instructions and blueprints to ascertain test specifications and objectives, and test nature of technical problems such as redesign.
Every day, mechanical engineering technicians are expected to be able to listen to and understand others in meetings. They need to articulate ideas and problems.
It is important for mechanical engineering technicians to read dials and meters to establish amperage, voltage, electrical output and input at specific operating temperature to analyze parts performance. They are often called upon to talk with technicians and submit reports of test results to engineering department and recommend layout or material changes. They also analyze test results in relation to layout or rated specifications and test objectives, and modify or adjust apparatus to meet specifications. They are sometimes expected to record test procedures and results, numerical and graphical data, and recommendations for changes in product or test methods. Somewhat less frequently, mechanical engineering technicians are also expected to inspect lines and figures for clarity and return erroneous drawings to designer for correction.
Mechanical engineering technicians sometimes are asked to estimate cost factors including labor and material for purchased and fabricated parts and costs for assembly or installing. They also have to be able to inspect lines and figures for clarity and return erroneous drawings to designer for correction And finally, they sometimes have to analyze test results in relation to layout or rated specifications and test objectives, and modify or adjust apparatus to meet specifications.
Like many other jobs, mechanical engineering technicians must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Little Rock include:
- Civil Engineering Technician. Apply theory and principles of civil engineering in planning, designing, and overseeing construction and maintenance of structures and facilities under the direction of engineering staff or physical scientists.
- Electronics Engineering Technician. Lay out, build, and modify developmental and production electronic components, parts, and systems, such as computer equipment, missile control instrumentation, electron tubes, and machine tool numerical controls, applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. Usually work under direction of engineering staff.
- Environmental Engineering Technician. Apply theory and principles of environmental engineering to modify, test, and operate equipment and devices used in the prevention, control, and remediation of environmental pollution, including waste treatment and site remediation. May assist in the development of environmental pollution remediation devices under direction of engineer.
- Equipment Engineering Technician. Apply electrical theory and related knowledge to test and modify developmental or operational electrical machinery and electrical control equipment and circuitry in industrial or commercial plants and laboratories. Usually work under direction of engineering staff.
- Industrial Engineering Technician. Apply engineering theory and principles to problems of industrial layout or manufacturing production, usually under the direction of engineering staff. May study and record time, motion, and speed involved in performance of production, maintenance, and other worker operations for such purposes as establishing standard production rates or improving efficiency.
EDUCATIONAL OPPORTUNITIES: Mechanical Engineering Technician Training
University of Arkansas at Little Rock - Little Rock, AR
University of Arkansas at Little Rock, 2801 S University Ave, Little Rock, AR 72204. University of Arkansas at Little Rock is a large university located in Little Rock, Arkansas. It is a public school with primarily 4-year or above programs and has 11,694 students. University of Arkansas at Little Rock has an associate's degree and a bachelor's degree program in Mechanical Engineering/Mechanical Technology/Technician which graduated one and eight students respectively in 2008.
Certified Forensic Claims Consultant : AACE International's Certified Forensic Claims Consultant (CFCC) certification program is designed to establish credentials to recognize your professional expertise.
For more information, see the AACE International (Association for the Advancement of Cost Engineering through total cost management) website.
Geometric Dimensioning & Tolerancing Professional - Technologist: ASME GDTP Certification provides the means to recognize proficiency in the understanding and application of the geometric dimensioning and tolerancing (GD&T) principles expressed in the ASME Y14.
For more information, see the American Society of Mechanical Engineers International website.
Certified Manufacturing Technologist: This certification primarily benefits new manufacturing engineers and experienced manufacturers without other credentials.
For more information, see the Society of Manufacturing Engineers website.
LOCATION INFORMATION: Little Rock, Arkansas
Little Rock is located in Pulaski County, Arkansas. It has a population of over 189,515, which has grown by 3.5% in the past ten years. The cost of living index in Little Rock, 87, is well below the national average. New single-family homes in Little Rock cost $236,400 on average, which is far greater than the state average. In 2008, three hundred sixty-one new homes were built in Little Rock, down from seven hundred thirty-one the previous year.
The top three industries for women in Little Rock are health care, educational services, and public administration. For men, it is health care, professional, scientific, and technical services, and construction. The average commute to work is about 20 minutes. More than 35.5% of Little Rock residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 13.4%, is higher than the state average.
The unemployment rate in Little Rock is 6.1%, which is less than Arkansas's average of 6.9%.
The percentage of Little Rock residents that are affiliated with a religious congregation, 59.1%, is more than both the national and state average. Macedonia Spiritual Church, Baseline Christian Church and Baseline Missionary Baptist Church are all churches located in Little Rock. The largest religious groups are the Southern Baptist Convention, the United Methodist Church and the Catholic Church.
Little Rock is home to the Rock Creek Golf Course and the Barton Coliseum as well as McArthur Park Historic District and Meriwether Park. Shopping malls in the area include Mainstreet Market Shopping Center, Market Street Plaza Shopping Center and Markham Plaza Shopping Center. Visitors to Little Rock can choose from LA Quinta - Inns- Medical Center Area, Hampton Inn & Suites and Acme Motel for temporary stays in the area.