Career and Education Opportunities for Sheet Metal Workers in Scottsdale, Arizona
There is a wide variety of career and education opportunities for sheet metal workers in the Scottsdale, Arizona area. There are currently 3,550 working sheet metal workers in Arizona; this should grow by 2% to 3,620 working sheet metal workers in the state by 2016. This is not quite as good as the national trend for sheet metal workers, which sees this job pool growing by about 6.5% over the next eight years. In general, sheet metal workers fabricate, assemble, and repair sheet metal products and equipment, such as ducts, control boxes, and furnace casings.
Income for sheet metal workers is about $15 hourly or $33,180 annually on average in Arizona. Nationally, their income is about $19 hourly or $40,290 per year. Compared with people working in the overall category of Metal Working and Welding, people working as sheet metal workers in Arizona earn less. They earn less than people working in the overall category of Metal Working and Welding nationally.
There are seventy-six schools of higher education in the Scottsdale area, including two within twenty-five miles of Scottsdale where you can get a degree to start your career as a sheet metal worker. Sheet metal workers usually hold a high school diploma or GED, so you can expect to spend only a short time studying to be a sheet metal worker if you already have a high school diploma.
CAREER DESCRIPTION: Sheet Metal Worker
In general, sheet metal workers fabricate, assemble, and repair sheet metal products and equipment, such as ducts, control boxes, and furnace casings. They also work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; inspecting, assembling, and smoothing seams and joints of burred surfaces.
Sheet metal workers drill and punch holes in metal for screws, bolts, and rivets. They also lay out and mark dimensions and reference lines on material, such as roofing panels, in line with drawings or templates, using calculators, scribes, dividers, squares, and rulers. Equally important, sheet metal workers have to fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items. They are often called upon to decide on project requirements and required methods and materials, in line with blueprints and written or verbal instructions. They are expected to set up assemblies, such as flashing, pipes, tubes, heating and air conditioning ducts and down spouts, in supportive frameworks. Finally, sheet metal workers fabricate or alter parts at construction sites, using shears, hammers, punches, and drills.
Every day, sheet metal workers are expected to be able to visualize how things come together and can be organized. They need to see details at a very fine level of focus. It is also important that they prioritize information for further consideration.
It is important for sheet metal workers to maneuver completed units into position for installation, and anchor the units. They are often called upon to shape metal material over anvils or other forms, using hand tools. They also finish parts, using hacksaws, and hand, rotary, or squaring shears. They are sometimes expected to transport prefabricated parts to construction sites for assembly and installation. Somewhat less frequently, sheet metal workers are also expected to lay out and mark dimensions and reference lines on material, such as roofing panels, in line with drawings or templates, using calculators, scribes, dividers, squares, and rulers.
Sheet metal workers sometimes are asked to convert blueprints into shop drawings to be followed in the construction and assembly of sheet metal products. They also have to be able to fasten roof panel edges and machine-made molding to structures, nailing or welding pieces into position And finally, they sometimes have to fabricate or alter parts at construction sites, using shears, hammers, punches, and drills.
Like many other jobs, sheet metal workers must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Scottsdale include:
- Steel Worker. Raise, place, and unite iron or steel girders, columns, and other structural members to form completed structures or structural frameworks. May erect metal storage tanks and assemble prefabricated metal buildings.
EDUCATIONAL OPPORTUNITIES: Sheet Metal Worker Training
GateWay Community College - Phoenix, AZ
GateWay Community College, 108 N. 40th Street, Phoenix, AZ 85034. GateWay Community College is a medium sized college located in Phoenix, Arizona. It is a public school with primarily 2-year programs and has 6,853 students. GateWay Community College has a one to two year and an associate's degree program in Sheet Metal Technology/Sheetworking which graduated twenty-one and zero students respectively in 2008.
Rio Salado College - Tempe, AZ
Rio Salado College, 2323 W 14th St, Tempe, AZ 85281. Rio Salado College is a large college located in Tempe, Arizona. It is a public school with primarily 2-year programs and has 19,186 students. Rio Salado College has a one to two year and an associate's degree program in Sheet Metal Technology/Sheetworking.
LOCATION INFORMATION: Scottsdale, Arizona
Scottsdale is located in Maricopa County, Arizona. It has a population of over 235,371, which has grown by 16.1% in the past ten years. The cost of living index in Scottsdale, 104, is above the national average. New single-family homes in Scottsdale are priced at $633,700 on average, which is far greater than the state average. In 2008, two hundred thirty-three new homes were constructed in Scottsdale, down from six hundred eighty-nine the previous year.
The three big industries for women in Scottsdale are health care, professional, scientific, and technical services, and educational services. For men, it is professional, scientific, and technical services, finance and insurance, and accommodation and food services. The average travel time to work is about 24 minutes. More than 44.1% of Scottsdale residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 14.7%, is higher than the state average.
The unemployment rate in Scottsdale is 6.4%, which is less than Arizona's average of 9.3%.
The percentage of Scottsdale residents that are affiliated with a religious congregation, 39.7%, is less than the national average but more than the state average. The most common religious groups are the Catholic Church, the LDS (Mormon) Church and the Southern Baptist Convention.
Scottsdale is home to the Arabian Library and the McCormick Ranch Golf Course as well as Indian Bend Wash Greenbelt and McCormick Railroad Park. Shopping centers in the area include Los Arcos Mall, Park Scottsdale Shopping Center and Papago Plaza Shopping Center. Visitors to Scottsdale can choose from Hyatt Regency & Resorts - Hyatt Regency Scottsdale Resort, Doubletree Paradise Valley and Innsuites Hotel-Scottsdale for temporary stays in the area.