Career and Education Opportunities for Heat Treating Equipment Operators in Gilbert, Arizona
Gilbert, Arizona provides a wide variety of opportunities, both career and educational, for heat treating equipment operators. There are currently 140 working heat treating equipment operators in Arizona; this should shrink by 12% to about 130 working heat treating equipment operators in the state by 2016. This is not quite as good as the national trend for heat treating equipment operators, which sees this job pool shrinking by about 10.6% over the next eight years. Heat treating equipment operators generally set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
A person working as a heat treating equipment operator can expect to earn about $13 per hour or $28,670 yearly on average in Arizona and about $15 per hour or $32,030 yearly on average in the U.S. as a whole. Earnings for heat treating equipment operators are not quite as good as earnings in the general category of Foundry and Metal Work in Arizona and not quite as good as general Foundry and Metal Work category earnings nationally.
The Gilbert area is home to seventy-six schools of higher education, including three within twenty-five miles of Gilbert where you can get a degree as a heat treating equipment operator. Given that the most common education level for heat treating equipment operators is a high school diploma or GED, you can expect to spend only a short time studying to be a heat treating equipment operator if you already have a high school diploma.
CAREER DESCRIPTION: Heat Treating Equipment Operator
In general, heat treating equipment operators set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
Every day, heat treating equipment operators are expected to be able to respond quickly in general. They need to focus attention on specific tasks without being distracted. It is also important that they maintain precise control of objects and devices through a range of movements.
It is important for heat treating equipment operators to remove components from furnaces after specified times, and air dry or cool components in water or other baths. They are often called upon to read production schedules and work orders to establish processing sequences and heat cycle requirements for objects to be heat-treated. They also decide on types and temperatures of baths and quenching media needed to attain specified part hardness and ductility, using heat-treating charts and knowledge of methods and metals. They are sometimes expected to record times that components are removed from furnaces to document that objects have attained specified temperatures for specified times. Somewhat less frequently, heat treating equipment operators are also expected to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations.
Heat treating equipment operators sometimes are asked to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations. They also have to be able to examine components to insure metal shades and colors conform to given requirements, utilizing knowledge of metal heat-treating And finally, they sometimes have to decide on flame temperatures and induction heating coils needed, on the basis of degree of hardness required and properties of stock to be treated.
Like many other jobs, heat treating equipment operators must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Gilbert include:
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Tool and Die Maker. Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Heat Treating Equipment Operator Training
Mesa Community College - Mesa, AZ
Mesa Community College, 1833 W Southern Ave, Mesa, AZ 85202. Mesa Community College is a large college located in Mesa, Arizona. It is a public school with primarily 2-year programs and has 23,825 students. Mesa Community College has less than one year, one to two year, and associate's degree programs in Machine Tool Technology/Machinist which graduated zero, zero, and three students respectively in 2008.
East Valley Institute of Technology - Mesa, AZ
East Valley Institute of Technology, 1601 W Main St, Mesa, AZ 85201. East Valley Institute of Technology is a small school located in Mesa, Arizona. It is a public school with primarily less-than 2-year programs and has 203 students. East Valley Institute of Technology has a one to two year program in Machine Tool Technology/Machinist which graduated one student in 2008.
Maricopa Skill Center - Phoenix, AZ
Maricopa Skill Center, 1245 E Buckeye, Phoenix, AZ 85034-4101. Maricopa Skill Center is a small school located in Phoenix, Arizona. It is a public school with primarily less-than 2-year programs and has 953 students. Maricopa Skill Center has a less than one year program in Machine Tool Technology/Machinist which graduated twenty-three students in 2008.
LOCATION INFORMATION: Gilbert, Arizona
Gilbert is located in Maricopa County, Arizona. It has a population of over 216,449, which has grown by 97.3% over the last ten years. The cost of living index in Gilbert, 94, is below the national average. New single-family homes in Gilbert are priced at $210,100 on average, which is below the state average. In 2008, 1,115 new homes were constructed in Gilbert, down from 2,891 the previous year.
The three most popular industries for women in Gilbert are educational services, health care, and finance and insurance. For men, it is computer and electronic products, construction, and professional, scientific, and technical services. The average travel time to work is about 29 minutes. More than 36.1% of Gilbert residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 11.3%, is higher than the state average.
The unemployment rate in Gilbert is 4.9%, which is less than Arizona's average of 9.3%.
The percentage of Gilbert residents that are affiliated with a religious congregation, 39.7%, is less than the national average but more than the state average. The largest religious groups are the Catholic Church, the LDS (Mormon) Church and the Southern Baptist Convention.
Gilbert is home to the Santan Substation and the Gilbert Substation as well as Library Park and Parquasito Verde Park. Shopping centers in the area include Village Square Shopping Center and Village Center Shopping Center. Visitors to Gilbert can choose from BCS Hospitality Consultants and CoastClub for temporary stays in the area.