Career and Education Opportunities for Welders in Birmingham, Alabama
Welder career and educational opportunities abound in Birmingham, Alabama. Currently, 9,310 people work as welders in Alabama. This is expected to grow by 23% to 11,490 people by 2016. This is better than the national trend for welders, which sees this job pool shrinking by about 1.6% over the next eight years. Welders generally use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders earn approximately $14 hourly or $30,970 annually on average in Alabama. Nationally they average about $16 per hour or $33,560 per year. Incomes for welders are not quite as good as in the overall category of Foundry and Metal Work in Alabama, and better than the overall Foundry and Metal Work category nationally.
There are two schools within twenty-five miles of Birmingham where you can study to be a welder, among fifteen schools of higher education total in the Birmingham area. Welders usually hold less than a high school diploma, so it will take only a short time to learn to be a welder if you already have a high school diploma.
CAREER DESCRIPTION: Welder
In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders bolt components to set required configurations and positions for welding. They also remove rough spots from workpieces, using portable grinders or scrapers. Equally important, welders have to chip or grind off excess weld or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. They are often called upon to weld components in flat or overhead positions. They are expected to operate safety equipment and use safe work habits. Finally, welders recognize and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Every day, welders are expected to be able to control objects and devices with precise control. They need to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for welders to ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. They are often called upon to examine workpieces for defects and measure workpieces with straightedges or templates to insure conformance with specifications. They also ready all material surfaces to be welded, ensuring that there is no loose or thick scale, slag or other foreign matter. They are sometimes expected to monitor the fitting and welding processes to avoid overheating of components or warping or expansion of material. Somewhat less frequently, welders are also expected to operate manual or semi-automatic welding apparatus to fuse metal segments.
Welders sometimes are asked to operate metal shaping and bending machines, such as brakes and shears. And finally, they sometimes have to decide on and install torches, torch tips and flux, in line with welding chart specifications or types and thicknesses of metals.
Like many other jobs, welders must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Birmingham include:
- Cabinet Maker. Cut, shape, and assemble wooden articles or set up and operate a variety of woodworking machines, such as power saws, jointers, and mortisers to surface, cut, or shape lumber or to fabricate parts for wood products.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Tool and Die Maker. Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Welder Training
Lawson State Community College-Birmingham Campus - Birmingham, AL
Lawson State Community College-Birmingham Campus, 3060 Wilson Rd SW, Birmingham, AL 35221-1717. Lawson State Community College-Birmingham Campus is a small college located in Birmingham, Alabama. It is a public school with primarily 2-year programs and has 3,507 students. Lawson State Community College-Birmingham Campus has a less than one year and a one to two year program in Welding Technology/Welder which graduated six and three students respectively in 2008.
Bevill State Community College - Sumiton, AL
Bevill State Community College, 101 State St, Sumiton, AL 35148. Bevill State Community College is a small college located in Sumiton, Alabama. It is a public school with primarily 2-year programs and has 3,860 students. Bevill State Community College has a less than one year and a one to two year program in Welding Technology/Welder which graduated seventeen and one students respectively in 2008.
Radiographic Interpreter: The program, based upon requirements contained within AWS B5.
For more information, see the American Welding Society website.
Certified Robotic Arc Welding: The Certification Program for Robotic Arc Welding - Operators and Technicians (CRAW) allows many welding personnel employed in various welding sectors to measure themselves against standards for their occupation.
For more information, see the American Welding Society website.
LOCATION INFORMATION: Birmingham, Alabama
Birmingham is located in Jefferson County, Alabama. It has a population of over 228,798, which has shrunk by 5.8% over the last ten years. The cost of living index in Birmingham, 81, is well below the national average. New single-family homes in Birmingham cost $187,300 on average, which is well above the state average. In 2008, one hundred thirty-two new homes were built in Birmingham, down from two hundred thirty-two the previous year.
The top three industries for women in Birmingham are health care, educational services, and finance and insurance. For men, it is construction, accommodation and food services, and health care. The average travel time to work is about 24 minutes. More than 18.5% of Birmingham residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 6.6%, is lower than the state average.
The unemployment rate in Birmingham is 12.5%, which is greater than Alabama's average of 10.7%.
The percentage of Birmingham residents that are affiliated with a religious congregation, 60.1%, is more than both the national and state average. Williams Chapel Christian Methodist Episcopal Church, Westminister Presbyterian Church and West End Methodist Church are all churches located in Birmingham. The most common religious groups are the Southern Baptist Convention, the United Methodist Church and the Catholic Church.
Birmingham is home to the Mineral Park Municipal Golf Course and the Cooper Green Golf Course as well as Avondale Mills Park and Smithfield Historic District. Shopping malls in the area include Acipco Shopping Center, Altadena Square Shopping Center and Parkway East Huffman Shopping Center. Visitors to Birmingham can choose from Marriott Hotel Birmingham, Rime Garden Extended Stay Suites and Studioplus for temporary stays in the area.